Hansa Alessi Sense 0773 Electronic Basin Mixer Tap User Manual

Introduction

This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Hansa Alessi Sense 0773 Electronic Basin Mixer Tap. Please read this manual carefully before using the product to ensure proper function and longevity.

Figure 1: Hansa Alessi Sense 0773 Electronic Basin Mixer Tap, a chrome-finished electronic tap designed for basin колдонуу.

Орнотуу жана орнотуу

Before beginning installation, ensure all necessary tools and components are available. It is recommended that installation be performed by a qualified professional.

Пакеттин мазмуну:

• Hansa Alessi Sense 0773 Electronic Basin Mixer Tap unit
• Монтаждоо жабдуулары
• Туташуу шлангдары
• 1 AA батарейка (кошулган)
• User Manual

Орнотуу кадамдары:

1. Prepare the installation area: Ensure the water supply is turned off at the main valve. Clear the basin аймак.
2. Mount the tap: Insert the tap unit into the designated hole on the basin or countertop. Secure it from underneath using the provided mounting hardware (washer, nut).
3. Суу менен камсыздоону туташтыруу: Attach the hot and cold water supply hoses to the corresponding inlets on the tap and to your home's water supply lines. Ensure connections are tight to prevent leaks.
4. Батареяны орнотуу: Locate the battery compartment, typically at the base of the tap or in a separate control box. Insert the included 1 AA battery, observing polarity.
5. Test for leaks and function: Slowly turn on the main water supply. Check all connections for leaks. Activate the tap to ensure water flows correctly and the electronic sensor functions as expected.

Иштөө нускамалары

The Hansa Alessi Sense 0773 is an electronic basin mixer tap designed for touchless operation.

Автоматтык сенсорду активдештирүү:

• To activate water flow, simply place your hands within the sensor's detection range, typically directly below the spout.
• The water will flow automatically as long as your hands are detected.
• Water flow will stop automatically once your hands are removed from the sensor's range.

Температураны жөндөө:

This model features a single handle for temperature control. Rotate the handle to adjust the water temperature from cold to hot. The electronic sensor controls only the water flow, not the temperature.

Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your Hansa Alessi Sense 0773 tap.

Тазалоо:

• Кранды жумшак чүпүрөк жана жумшак самын же хром менен каптоо үчүн атайын иштелип чыккан абразивдүү эмес тазалоочу каражат менен үзгүлтүксүз тазалап туруңуз.
• Do not use abrasive cleaners, scouring pads, or acidic detergents, as these can damage the chrome finish and sensor.
• Wipe the sensor area gently to ensure it remains clear of obstructions.

Батареяны алмаштыруу:

The tap is powered by 1 AA battery. When the battery is low, the tap may exhibit intermittent operation or cease to function. Replace the battery as follows:

1. Кранга суу берүүнү өчүрүңүз.
2. Locate the battery compartment (refer to installation section if unsure).
3. Эски батареяны алып чыгып, жоопкерчилик менен жок кылыңыз.
4. Insert a new 1 AA battery, ensuring correct polarity.
5. Close the battery compartment and turn on the water supply. Test the tap's function.

Аэраторду тазалоо:

If water flow becomes weak or uneven, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris or mineral deposits, and reattach it securely.

Проблемаларды чечүү

This section addresses common issues you might encounter with your Hansa Alessi Sense 0773 tap.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and technical support, please refer to the official Hansa webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Hansa Official Webсайт: www.hansa.com

For further assistance, please contact your local Hansa dealer or the retailer from whom you purchased the product.