1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of your Hansa Varox Pro Embedded Thermostatic Shower Mixer. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
2. Коопсуздук маалыматы
Ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Орнотуу жергиликтүү сантехника жана курулуш нормаларына ылайык квалификациялуу адис тарабынан аткарылышы керек.
- Ар кандай орнотуу же тейлөө иштерин баштоодон мурун суу менен камсыздоо өчүрүлгөнүн текшериңиз.
- Do not use abrasive cleaners or solvents on the chrome finish, as this may cause damage.
- Verify all connections are secure and watertight to prevent leaks.
- The thermostatic function is designed to maintain a consistent water temperature. Periodically check the temperature calibration.
3. Продукт бүтүп калдыview жана компоненттер
The Hansa Varox Pro is an embedded thermostatic shower mixer designed for precise temperature control and reliable performance. It features a sleek chrome finish and intuitive controls.
Жакын план view of the Hansa Varox Pro embedded thermostatic shower mixer. It features a square chrome backplate with two circular controls. The upper control is a diverter or flow control, and the lower, larger control is for temperature adjustment, marked with temperature indicators. The finish is polished chrome.
Негизги компоненттер:
- Термостатикалык картридж: Regulates water temperature.
- Flow Control Handle: Adjusts water volume or diverts flow (if applicable).
- Temperature Control Handle: Sets desired water temperature.
- Chrome Faceplate: Decorative cover for the embedded unit.
4. Орнотуу боюнча нускамалар
This section outlines the general steps for installing the Hansa Varox Pro. Refer to the detailed installation diagram provided with your product packaging for precise measurements and connections.
4.1 Орнотууга чейинки текшерүүлөр
- Ensure all necessary plumbing connections (hot and cold water lines) are in place and accessible.
- Verify that the wall cavity is sufficient for the embedded unit.
- Confirm water pressure is within the recommended range for optimal performance.
4.2 Орнотуу кадамдары
- Суу менен камсыздоону өчүрүү: Негизги суу өчүрүүчү клапанды табыңыз жана орнотуу аянтына суу берүүнү өчүрүңүз.
- Prepare Wall Cavity: Create an opening in the wall according to the dimensions specified in the product diagram.
- Mount Embedded Unit: Securely mount the embedded mixer unit within the wall cavity, ensuring it is level and at the correct depth relative to the finished wall surface.
- Суу линияларын туташтыруу: Connect the hot and cold water supply lines to the corresponding inlets on the mixer unit. Ensure proper sealing with appropriate plumbing tape or sealant.
- Розеткага туташуу: Connect the mixed water outlet to your shower head or other shower components.
- Агышуу үчүн сыноо: Негизги суу түтүгүн акырындык менен күйгүзүп, бардык туташуулардын агып жатканын текшериңиз. Агып кетүүлөрдү дароо оңдоңуз.
- Install Faceplate and Handles: Once the embedded unit is secure and leak-free, install the chrome faceplate and attach the flow and temperature control handles according to the instructions.
- Температураны калибрлөө (зарыл болсо): Follow the specific instructions for calibrating the thermostatic cartridge to ensure accurate temperature output.
5. Иштөө нускамалары
The Hansa Varox Pro is designed for simple and intuitive operation.
5.1 Суунун агымын жөнгө салуу
Rotate the flow control handle (typically the upper handle) to turn the water on or off, and to adjust the water volume. If your model includes a diverter, this handle may also switch between different shower outlets (e.g., overhead shower, hand shower).
5.2 Суунун температурасын коюу
Rotate the temperature control handle (typically the lower, larger handle) to set your desired water temperature. The thermostatic cartridge will automatically mix hot and cold water to maintain the selected temperature, even if water pressure fluctuates.
- For safety, most thermostatic mixers have a safety stop at approximately 38°C (100°F). To exceed this temperature, you typically need to press a button or override the safety stop while turning the handle.
- Allow a few seconds for the temperature to stabilize after adjustment.
6. Техникалык тейлөө жана кам көрүү
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Hansa Varox Pro mixer.
6.1 Chrome Finishти тазалоо
- Clean the chrome surfaces regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome fixtures.
- Таза суу менен жакшылап жууп, суу тактарын болтурбоо үчүн жумшак чүпүрөк менен кургатуу керек.
- колдонууга болбойт: Abrasive sponges, scouring pads, harsh chemicals, acid-based cleaners, or cleaners containing alcohol, ammonia, or bleach, as these can damage the chrome finish.
6.2 Thermostatic Cartridge Maintenance
In areas with hard water, mineral deposits can affect the performance of the thermostatic cartridge. If you notice inconsistent temperature or reduced flow, the cartridge may need cleaning or descaling. This procedure should ideally be performed by a qualified plumber.
- Эскертүү: Turn off the water supply before attempting any internal maintenance.
- Consult a professional for cartridge removal and cleaning, or refer to specific instructions provided with the cartridge if you are experienced in plumbing maintenance.
7. Кыйынчылыктарды
This section addresses common issues you might encounter with your thermostatic shower mixer.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Ылайыксыз суунун температурасы | Fluctuating water pressure; blocked thermostatic cartridge; incorrect temperature calibration. | Check household water pressure; clean or replace thermostatic cartridge; recalibrate temperature. |
| Суунун аз агымы | Blocked filter/aerator; kinked supply hose; low water pressure. | Clean or replace filters; check hoses for kinks; consult a plumber regarding water pressure. |
| Water not hot enough / too hot | Incorrect temperature setting; hot water supply issue; thermostatic cartridge malfunction. | Adjust temperature setting; check hot water heater; clean or replace thermostatic cartridge. |
| Leaking from handles or faceplate | Loose connections; worn O-rings or seals; damaged cartridge. | Tighten connections; replace O-rings/seals; replace cartridge. |
If the problem persists after attempting these solutions, please contact a qualified plumber or Hansa customer support.
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Hansa |
| Модель номери | 40579073 |
| Продукт түрү | Embedded Thermostatic Shower Mixer |
| Бүтүрүү | Chrome |
| Элемент Салмагы | 2.03 килограмм |
| ASIN | B071HDP9GT |
| Эл аралык макала кодекси | 04057304003752 |
9. Кепилдик маалыматы
Hansa products are manufactured to high quality standards. For specific warranty terms and conditions applicable to your Hansa Varox Pro Embedded Thermostatic Shower Mixer, please refer to the warranty card included with your product or visit the official Hansa webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
10. Кардарларды колдоо кызматы
If you require further assistance, have questions not covered in this manual, or need to order replacement parts, please contact Hansa customer support or your local authorized distributor. Contact details can typically be found on the Hansa official webсайтында же продуктунун таңгагында.
Webсайт: www.hansa.com (Please verify the correct regional webсайт)
