1. Продукт бүтүп калдыview
The VIAIR Dual Stealth Black 444C Onboard Air System is a pre-packaged compressed air solution designed for various pneumatic applications. This system includes two 444C compressors, a 2.5-gallon air tank, an inline pressure regulator, and all necessary components for installation.
Негизги өзгөчөлүктөрү:
- 2.5-gallon 200 PSI VIAIR air tank
- (2) 444C VIAIR compressors with thermal overload protectors
- 30ft. Coil hose with quick connects
- Tire inflation gun with 200 psi gauge
- 0-220 PSI pressure regulator
Image 1.1: The VIAIR Dual Stealth Black 444C Onboard Air System, showcasing the dual compressors, air tank, and included accessories.
ЭСКЕРТҮҮ: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Handle with care and follow all safety guidelines.
2. Орнотуу жана орнотуу
Proper installation is crucial for the safe and efficient operation of your VIAIR Onboard Air System. If you are not confident in performing the installation yourself, it is recommended to seek professional assistance.
2.1 Коопсуздук чаралары
- Кандайдыр бир электрдик жумуштарды баштоодон мурун дайыма унаанын аккумуляторун ажыратыңыз.
- Wear appropriate personal protective equipment (PPE), including eye protection.
- Орнотуу аймагынын жакшы желдетилгенин текшериңиз.
- Never exceed the maximum operating pressure of 200 PSI.
2.2 Mounting Components
Select a secure, dry, and well-ventilated location for mounting the air tank and compressors. Avoid areas exposed to excessive heat, moisture, or road debris. The compressors should be mounted in an upright position to ensure proper cooling and operation.
- Аба танкы: Securely fasten the 2.5-gallon air tank using appropriate hardware. Ensure it is protected from potential impact.
- Компрессорлор: Mount the two 444C compressors to a stable surface, minimizing vibration. Ensure adequate airflow around the compressors for cooling.
2.3 Электр зымдары
Connect the compressors to the vehicle's electrical system. Use heavy-gauge wiring suitable for the 40 Amp draw of the system. Install an inline fuse or circuit breaker close to the battery for protection.
- Connect the positive (+) wire from the compressors to a fused 12V power source.
- Connect the negative (-) wire from the compressors to a good chassis ground.
- Wire the pressure switch to control the compressors, ensuring they turn on when tank pressure drops below a set point and off when it reaches the maximum.
2.4 Аба линияларынын байланыштары
Connect all air lines using appropriate fittings. Ensure all connections are tight and sealed to prevent air leaks.
- Connect the output of both compressors to the air tank.
- Install the pressure regulator on the output side of the air tank, if desired, to control output pressure.
- Connect the 30ft coil hose to a quick-connect fitting on the system.
- Apply thread sealant to all NPT fittings to ensure an airtight seal.
3. Иштетүү үчүн колдонмо
This section outlines the basic steps for operating your VIAIR Dual Stealth Black 444C Onboard Air System for tire inflation and other pneumatic tasks.
3.1 Алгачкы ишке киргизүү
- Орнотулгандан кийин, унаанын аккумуляторун кайра туташтырыңыз.
- Turn on the system's power switch (if installed). The compressors should begin to fill the air tank until the pressure switch reaches its cut-off pressure (up to 200 PSI).
- Listen for any air leaks and check all connections.
3.2 Дөңгөлөктөрдүн инфляциясы
- Connect the tire inflation gun to the coil hose.
- Attach the inflation gun's chuck to the tire valve stem.
- Monitor the pressure on the 200 PSI gauge integrated into the inflation gun.
- Inflate the tire to the desired pressure. Release the trigger to stop airflow.
- Disconnect the inflation gun from the tire valve and then from the coil hose.
3.3 Басымды жөнгө салуу
The included 0-220 PSI pressure regulator allows you to control the output air pressure for specific tools or applications. Adjust the regulator knob to set the desired working pressure.
4. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your VIAIR Onboard Air System.
4.1 Draining Moisture from Air Tank
Moisture can accumulate inside the air tank, leading to corrosion and reduced performance. It is essential to drain the tank regularly, especially in humid environments.
- With the system depressurized, open the drain cock at the bottom of the air tank.
- Allow all accumulated moisture to drain completely.
- Close the drain cock securely.
4.2 Checking Connections and Fittings
Periodically inspect all air line connections, electrical wiring, and mounting hardware for tightness and signs of wear or damage.
- Check for air leaks using soapy water on all fittings and connections. Bubbles indicate a leak.
- Бардык электр байланыштары коопсуз жана коррозиядан таза экенин текшериңиз.
- Verify that the compressors and air tank are still securely mounted.
4.3 Compressor Air Filters
Inspect and clean or replace the air filters on the compressors as needed. Clogged filters can reduce compressor efficiency and lifespan.
5. Кыйынчылыктарды
This section provides solutions to common issues you might encounter with your VIAIR Dual Stealth Black 444C Onboard Air System.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Compressors do not turn on. | No power, blown fuse, faulty pressure switch, loose wiring. | Check battery connections, inspect inline fuse/circuit breaker, verify pressure switch wiring, ensure all electrical connections are secure. |
| Air leaks from fittings. | Loose connections, insufficient thread sealant, damaged O-rings/seals. | Tighten all fittings. Disassemble, apply appropriate thread sealant (e.g., PTFE tape or liquid sealant), and reassemble. Replace any damaged seals. |
| Low air pressure or slow inflation. | Air leaks, clogged air filter, low voltage, worn compressor components. | Check for air leaks (see above). Clean or replace air filters. Verify proper 12V power supply to compressors. If issues persist, contact support. |
| Компрессор күтүлбөгөн жерден токтойт. | Термикалык ашыкча жүктөн коргоо иштетилди. | Allow the compressor to cool down for 20-30 minutes. Ensure adequate ventilation around the compressor. Reduce duty cycle if operating continuously for extended periods. |
6. Техникалык шарттар
Detailed specifications for the VIAIR Dual Stealth Black 444C Onboard Air System.
| Спецификация | Нарк |
|---|---|
| Бренд | VIAIR |
| Модель аты | Dual Stealth Black 444C Onboard Air System |
| Бөлүмдүн номери | 20020 |
| Тtage | 12 вольт |
| Максималдуу иштөө басымы | 200 PSI |
| Аба агымынын сыйымдуулугу (CFM) | 3.53 CFM |
| Максималдуу күч | 3.53 Ат күчү |
| Танк көлөмү | 2.5 галлон |
| Шлангдын узундугу | 30 Фут |
| Ызы-чуу деңгээли | 69 децибел |
| Элемент Салмагы | 53 фунт |
| Продукциянын өлчөмдөрү | 27 x 23 x 11.5 дюйм |
| Power Source | Батарея менен иштейт |
| UPC | 818114002397 |
7. Кепилдик жана колдоо
7.1 Продукциянын кепилдиги
The VIAIR Dual Stealth Black 444C Onboard Air System is covered by a 1 Year Manufacturer Defect Warranty. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.
7.2 Кардарларды колдоо
For technical assistance, warranty claims, or replacement parts, please contact VIAIR customer support. Refer to the official VIAIR webакыркы байланыш маалыматы үчүн сайт же сатып алуу документтери.
