Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Xpelair Simply Silent Contour C6S Square 150mm Extractor Fan. Please read these instructions carefully before installation and retain them for future reference.
Сүрөт: алдыңкы view of the Xpelair Simply Silent Contour C6S Square 150mm Extractor Fan, showing its white, square design with rounded corners and the Xpelair logo in the bottom right.
Продукт бүттүview
The Xpelair Simply Silent Contour C6S is a two-speed 150mm extractor fan designed for wall, ceiling, and panel mounting. It features a square design and is equipped with a timer function (C6TS model). This fan is engineered to provide efficient ventilation while aiming for quiet operation, suitable for various domestic applications, particularly bathrooms.
- Модел: C6S (Contour Square)
- Түрү: 150mm Extractor Fan
- Өзгөчөлүктөрү: Two-speed operation, Timer function (C6TS variant), IPX4 rated.
- Шайкештик: Part F, L and ErP compliant.
Коопсуздук маалыматы
Always disconnect the power supply before installation, maintenance, or servicing. Installation should only be carried out by a qualified electrician in accordance with current wiring regulations. Do not operate the fan if any part is damaged. Ensure proper earthing.
- Кубат менен камсыздоо күйөрмандын көлөмүнө дал келишин текшериңизtage (220-240V).
- Аба агымына тоскоолдук кылбаңыз.
- Иштеп жатканда балдарды жана үй жаныбарларын желдеткичтен алыс кармаңыз.
Орнотуу жана орнотуу
This section outlines the general steps for installing the Xpelair Simply Silent Contour C6S fan. For detailed wiring diagrams and specific mounting instructions, refer to the separate installation guide provided with the product packaging.
- Даярдоо:
- Ensure the power supply is switched off at the mains.
- Select a suitable mounting location (wall, ceiling, or panel) that allows for adequate airflow and access for maintenance.
- Prepare the opening for the fan ducting (150mm diameter).
- Монтаждоо:
- Secure the fan body to the chosen surface using appropriate fixings. Ensure it is level and stable.
- Connect the ducting to the fan's spigot, ensuring a tight seal to prevent air leakage.
- Электр байланышы:
- Connect the electrical wiring according to the wiring diagram provided in the full installation manual. This typically involves Live, Neutral, and Switched Live connections for the timer function.
- Бардык байланыштар коопсуз жана изоляцияланганын текшериңиз.
- Терминалдын капкагын ордуна коюңуз.
- Жыйынтыктоочу жыйын:
- Attach the front cover of the fan.
- Restore power supply and test the fan's operation.
Иштөө нускамалары
The Xpelair Simply Silent Contour C6S (C6TS timer model) operates based on the electrical connection and its integrated timer.
- Негизги операция: The fan will activate when the connected light switch (or other switched live source) is turned on.
- Timer Function (C6TS): After the light switch is turned off, the fan will continue to run for a pre-set period. This overrun timer is typically adjustable during installation. Refer to the installation guide for instructions on adjusting the timer setting.
- Ылдамдык тандоо: The fan may have internal jumpers or switches to select between two speeds (e.g., 216m³/h and 248m³/h). This setting is usually configured during installation.
Техникалык тейлөө
Regular cleaning and maintenance will ensure the longevity and optimal performance of your extractor fan.
- Кубатты өчүрүү: Always switch off the electricity supply to the fan at the mains before performing any cleaning or maintenance.
- Таза сырткы: Wipe the exterior surface of the fan with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Таза ички жасалга (эгер бар болсо): If safe and accessible, carefully remove the front cover and gently clean any dust or debris from the fan blades and internal surfaces using a soft brush or vacuum cleaner. Do not use water directly on electrical components.
- Кайра чогултуу: Ensure all parts are dry before reassembling the fan cover.
- Күчтү калыбына келтирүү: Once reassembled, restore the power supply.
Жыштыгы: It is recommended to clean the fan every 3-6 months, depending on usage and environmental conditions.
Проблемаларды чечүү
If you experience issues with your Xpelair Simply Silent Contour C6S fan, consult the table below. For problems not listed or if solutions do not resolve the issue, contact qualified personnel.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Желдеткич иштебейт. | No power supply; Loose wiring; Faulty switch; Motor failure. | Check mains power and circuit breaker. Verify wiring connections (consult electrician). Test switch. If motor failure, professional repair or replacement may be needed. |
| Вентилятор өтө ызы-чуулуу. | Loose mounting; Obstruction in fan blades/ducting; Motor bearing wear; Backdraft flap noise. | Ensure fan is securely mounted. Check for and remove any obstructions. If motor noise persists, professional inspection is advised. For backdraft flap noise, ensure it moves freely and consider adding soft material to contact points if applicable. |
| Начар казып алуу. | Blocked ducting; Dirty fan blades; Incorrect fan speed setting. | Check ducting for blockages. Clean fan blades. Verify fan speed setting (if adjustable). |
| Timer function not working correctly. | Incorrect timer setting; Wiring issue with switched live. | Adjust timer setting as per installation manual. Verify switched live connection (consult electrician). |
Техникалык шарттар
Key technical specifications for the Xpelair Simply Silent Contour C6S Extractor Fan:
- Модель номери: C6S
- Тtage: 220-240V
- Ватtage: 12.9W (low speed) / 28.4W (high speed)
- Аба агымынын кубаттуулугу: 216 m³/h (60 L/s) / 248 m³/h (69 L/s)
- Үн деңгээли: 42.3 dBA (low speed) / 44.6 dBA (high speed) at 3m
- SFP (Specific Fan Power): 0.22 W/L/s (low speed) / 0.41 W/L/s (high speed)
- IP рейтинги: IPX4
- Өлчөмдөрү: Болжол менен 25.4 x 25 x 17.9 см (Таңгактын өлчөмдөрү)
- Салмагы: 1.37 кг
- Түсү: Ак
- Тастыктоо: ErP compliant
Кепилдик маалымат
Xpelair products are manufactured to high standards and are covered by a manufacturer's warranty against defects in materials or workmanship. The specific terms and duration of the warranty may vary. Please refer to the warranty card included with your product or visit the official Xpelair webтолук кепилдик маалымат жана каттоо жол-жоболору үчүн сайт.
Колдоо жана Байланыш
For technical assistance, spare parts, or further inquiries regarding your Xpelair Simply Silent Contour C6S fan, please contact Xpelair customer support.
- Өндүрүүчү: Xpelair
- Webсайт: Visit the Xpelair Store on Amazon (жалпы продукт маалымат үчүн)
- For direct support, please refer to the contact details provided in your product packaging or on the official Xpelair corporate webсайт.
