1. Продукт бүтүп калдыview
The Precision 2308-3-630 Mortise Exit Device is a robust and reliable panic hardware solution designed for commercial single and double door applications. This device ensures safe and efficient egress, meeting stringent safety and performance standards. It is suitable for doors requiring a mortise lock preparation and offers field-reversible handing for versatile installation.
2. Негизги өзгөчөлүктөрү
- 630 Stainless Steel Finish: Provides durability and a professional aesthetic.
- Field Reversible Handing: Allows for easy adaptation to left-hand or right-hand doors.
- Эшиктин шайкештиги: Designed for 1-3/4" thick doors, 3'-0" wide openings, and 30-36" door widths.
- Mortise Lock Included: Comes with a classroom mortise lock.
- UL тизмеси: Certified for Panic and Fire Exit Hardware applications.
- ANSI/BHMA Certified: Meets ANSI 156.3, Grade 1 standards for high performance.
- Оор жүктүү курулуш: Cover, Touchbar, Device Channel, Lock/Hinge Side Filler, and End Cap are made of heavy wrought Brass, Bronze, or Stainless Steel. Chassis is Investment Cast Steel, Zinc Dichromated.
3. Компоненттер жана тетиктер
The Precision 2308-3-630 Mortise Exit Device consists of several key components:
- Exit Device Assembly: Includes the touchbar, device channel, and end cap.
- Мортиз кулпусу: A classroom mortise lock (M303, M308, M310 series) with a 2-3/4" backset, 8" x 1-1/4" front plate, stainless steel deadlocking latchbolt, and sliding guardbolt.
- Strike Plate: Standard No. S982, handed curved lip strike.
- Dogging Mechanism: 1/4" turn hex key dogging (not available on Fire Exit Hardware).
1-сүрөт: Бүттүview of the Precision 2308-3-630 Mortise Exit Device. This image displays the main body of the exit device, including the touchbar and the mortise lock mechanism on the left side, ready for installation into a door.
4. Орнотуу жана орнотуу
4.1 Орнотууга чейинки текшерүүлөр
- Ensure the door is prepared according to ANSI A115.1 (Type 86) Mortise Lock specifications.
- Verify door thickness is 1-3/4" and door width is between 30-36".
- Confirm all components are present: exit device, mortise lock, strike plate, and fasteners. Note that exterior trim and mortise cylinder are not included and must be sourced separately.
4.2 Handing Reversibility
The device is field reversible. The Touchbar Assembly, Mortise Lock, and Trim (if applicable) can be reversed on-site to accommodate either left-hand or right-hand door configurations. For complete device reversibility, a mortise strike plate for the opposite hand may be required.
4.3 General Installation Steps (Consult Full Template)
- Prepare the door and frame according to the provided installation template (not included in this manual, typically supplied with the product).
- Install the mortise lock into the door's mortise pocket. Ensure the lock front plate pivots correctly for beveled or square-edged doors.
- Attach the exit device assembly to the door, aligning it with the mortise lock.
- Secure all components with appropriate fasteners.
- Install the strike plate (No. S982) on the door frame, ensuring proper alignment with the latchbolt.
- Test the device for smooth operation and proper latching.
5. Операция
To exit, simply push the touchbar on the interior side of the door. This action retracts the latchbolt, allowing the door to open. The device is designed for immediate and unobstructed egress.
5.1 Dogging Function
For applications where the door needs to remain unlocked and open without the latchbolt extending, the dogging mechanism can be engaged. Insert a 1/4" hex key into the dogging hole (typically located on the underside of the device) and turn it 1/4 turn. This will hold the latchbolt retracted. To disengage, turn the hex key back 1/4 turn. Note: Dogging is NOT available on Fire Exit Hardware models.
6. Техникалык тейлөө
- Тазалоо: Clean the device surfaces with a soft, damp кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
- Майлоо: Periodically apply a small amount of silicone-based lubricant to moving parts within the mortise lock and exit device mechanism to ensure smooth operation. Do not over-lubricate.
- Текшерүү: Regularly inspect the device for any signs of wear, loose fasteners, or damage. Ensure the touchbar operates freely and the latchbolt retracts fully.
- Fire Exit Hardware: For fire-rated doors, ensure the dogging mechanism is never engaged, as this would compromise the fire rating.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Device does not latch properly. | Misalignment of strike plate or mortise lock. | Adjust strike plate position. Check mortise lock installation. |
| Touchbar is stiff or difficult to push. | Lack of lubrication; debris in mechanism; bent touchbar. | Clean and lubricate moving parts. Inspect for damage. |
| Dogging mechanism not working. | Incorrect hex key size; mechanism jammed; device is Fire Exit Hardware. | Use correct 1/4" hex key. Clear any obstructions. Note that dogging is disabled on Fire Exit Hardware. |
8. Техникалык шарттар
- Модель номери: 2308-3-630
- Бүтүрүү: 630 Дат баспас болот
- Эшик түрү: Single and Double Door Applications
- Эшик калыңдыгы: Standard for 1-3/4"
- Эшик туурасы: For 3'-0" wide openings (30-36" doors)
- Mortise Lock Preparation: Covers ANSI A115.1 (Type 86)
- Негизги материал: Heavy wrought Brass, Bronze, or Stainless Steel (Cover, Touchbar, Device Channel, Lock/Hinge Side Filler, End Cap)
- Шасси: Investment Cast Steel, Zinc Dichromated
- Dogging: 1/4" turn hex key dogging standard (not on Fire Exit Hardware)
- Touchbar Height: 39-15/16" from floor standard
- Берүү: Field Reversible
- Сертификаттар: UL Listed (Panic and Fire Exit Hardware), ANSI/BHMA 156.3, Grade 1
- Mortise Lock Backset: 2-3/4"
- Mortise Lock Front Plate: 8" x 1-1/4" Bronze, Brass or Stainless Steel
- Latchbolt: Stainless Steel, Deadlocking, 3/4" throw, anti-friction
- Guardbolt: Stainless Steel, sliding type
- Standard Strike: No. S982, handed curved lip strike
- Продукциянын өлчөмдөрү: 48 x 8 x 4 дюйм
2-сүрөт: Examples of various lock finishes. The 630 finish, which is Satin Stainless Steel, is typically represented by the bottom right option in this type of chart, providing a visual reference for the product's finish.
9. Кепилдик маалыматы
Specific warranty details for the Precision 2308-3-630 Mortise Exit Device are not provided in this manual. Please refer to the manufacturer's official webсайтына кириңиз же учурдагы кепилдик шарттары жана эрежелери үчүн алардын кардарларды колдоо кызматына кайрылыңыз.
10. Колдоо жана байланыш
For technical assistance, replacement parts, or further inquiries regarding the Precision 2308-3-630 Mortise Exit Device, please contact Precision customer support. Contact information is typically available on the product packaging or the official Precision webсайт.
