Stiga SBC 252 D Petrol Brushcutter User Manual

1. Киришүү жана коопсуздук маалыматы

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Stiga SBC 252 D petrol brushcutter. Please read this manual carefully before using the machine to ensure your safety and the longevity of the product.

1.1 Жалпы коопсуздук эрежелери

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, sturdy footwear, and long trousers.
• Never operate the brushcutter under the influence of alcohol, drugs, or medication that may impair judgment.
• Keep bystanders, especially children and pets, at a safe distance (at least 15 meters) from the operating area.
• Inspect the work area for obstacles such as rocks, metal objects, or debris that could be thrown or damage the cutting head.
• Do not operate the brushcutter in poor light conditions or in wet weather.
• Ensure all guards and safety devices are in place and functioning correctly before starting the engine.

1.2 Күйүүчү майдын коопсуздугу

• Күйүүчү майды өтө этияттык менен колдонуңуз. Ал тез күйүүчү.
• Mix fuel and oil according to the manufacturer's specifications for two-stroke engines.
• Refuel outdoors and away from ignition sources. Do not smoke while refueling.
• Төгүлгөн күйүүчү майдын баарын дароо сүртүңүз.
• Күйүүчү майды уруксат берилген идиштерде салкын, жакшы желдетилген жерде сактаңыз.

2. Продукт бүтүп калдыview жана компоненттер

Familiarize yourself with the main components of your Stiga SBC 252 D brushcutter.

2.1-сүрөт: Жалпысынан view of the Stiga SBC 252 D petrol brushcutter. This image shows the complete assembly including the engine unit, shaft, handle, and cutting head with guard.

2.2-сүрөт: Жакын план view of the control handle and shaft assembly. This image highlights the ergonomic handle design and the location of the throttle and stop switch.

2.3-сүрөт: Тик view of the brushcutter, illustrating the full length of the shaft and the cutting head. This perspective shows the balance of the machine.

2.4-сүрөт: Side view of the engine unit and the connection to the main shaft. This image provides a clear view of the engine housing and fuel tank.

Негизги компоненттер:

• Кыймылдаткыч блогу: Houses the 2-stroke petrol engine.
• Күйүүчү май багы: For petrol-oil mixture.
• Starter Cord: Кыймылдаткычты кол менен иштетүү үчүн.
• Вал: Connects the engine to the cutting head.
• Рул: Ergonomic handle for control and maneuverability.
• дроссель триггери: Мотор ылдамдыгын көзөмөлдөйт.
• Которуштурууну токтотуу: For immediate engine shutdown.
• Кесүү башчысы: Equipped with a nylon line for trimming.
• Сакчы: Protects the user from debris thrown by the cutting head.
• Harness Attachment Point: For connecting a shoulder harness (not always included, but recommended for comfort).

3. Орнотуу жана чогултуу

The Stiga SBC 252 D brushcutter requires some assembly before first use. Follow these steps carefully.

3.1 Пакеттен чыгаруу

• Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
• Check the contents against the packing list to ensure all parts are present.
• Таңгактоочу материалдарды жоопкерчилик менен таштаңыз.

3.2 Рулдун монтажы

1. Attach the handlebar to the main shaft using the provided clampлар жана болттар.
2. Ensure the handlebar is positioned comfortably for your height and operating posture.
3. Бардык болтторду бекем тартыңыз.

3.3 Guard and Cutting Head Installation

1. Slide the protective guard onto the lower part of the shaft, ensuring it is correctly aligned with the cutting head.
2. Secure the guard with the screws provided.
3. Attach the cutting head (trimmer line head) to the gearbox at the end of the shaft. Follow the specific instructions in the included assembly diagram for correct orientation and tightening.

3.4 Күйүүчү май аралашмасын даярдоо

• This brushcutter uses a 2-stroke engine. Mix unleaded petrol with high-quality 2-stroke engine oil at the ratio specified by Stiga (typically 50:1 or 25:1, refer to engine label or quick start guide for exact ratio).
• Use a clean, approved fuel container for mixing.
• Shake the mixture thoroughly before pouring into the fuel tank.

4. Иштөө нускамалары

Follow these steps for safe and effective operation of your brushcutter.

4.1 Моторду ишке киргизүү

1. Щетка кескичти тегиз, туруктуу бетке коюңуз.
2. Ensure the stop switch is in the "ON" position.
3. Карбюраторду күйүүчү май көрүнгөнгө чейин праймер лампасын бир нече жолу басып, праймерди күйгүзүңүз.
4. Дроссельди күйгүзүңүз (муздак от алса).
5. Pull the starter cord firmly and smoothly until the engine fires.
6. Once the engine starts, disengage the choke gradually.
7. Толук газды колдонуудан мурун кыймылдаткычты бир нече мүнөткө жылытууга уруксат бериңиз.

4.2 Operating the Brushcutter

• Wear the shoulder harness for comfortable and balanced operation.
• Hold the brushcutter firmly with both hands on the handlebar.
• Туруктуу бутту жана тең салмактуулукту сактаңыз.
• Cut with a sweeping motion, moving from right to left to throw debris away from you.
• Avoid hitting hard objects with the cutting line.
• To extend the trimmer line, tap the cutting head gently on the ground while the engine is running at full throttle (Tap & Go system).

4.3 Моторду токтотуу

• Дроссель триггерин бошотуңуз.
• Move the stop switch to the "OFF" position.

5. Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the life of your brushcutter. Always disconnect the spark plug cap before performing any maintenance.

5.1 Аба чыпкасын тазалоо

• Аба чыпкасы капкагын алып салыңыз.
• Clean the air filter element with warm, soapy water. Rinse thoroughly and allow to dry completely.
• Alternatively, replace the air filter if it is heavily soiled or damaged.
• Reinstall the air filter and cover.

5.2 Учкунды текшерүү

• От алдыргыч ачкычын колдонуп, от алдыргыч шамдын капкагын, андан кийин от алдыргыч шамды чыгарыңыз.
• Inspect the spark plug for wear, carbon deposits, or damage.
• Clean any deposits with a wire brush. Adjust the electrode gap if necessary (refer to specifications for correct gap).
• Replace the spark plug if it is worn or damaged.
• Reinstall the spark plug and cap, tightening to the recommended torque.

5.3 Редукторду майлоо

• Periodically check the grease level in the gearbox at the cutting head.
• Add high-quality multi-purpose grease if needed.

5.4 Жалпы тазалоо жана сактоо

• Clean the brushcutter thoroughly after each use, removing grass, dirt, and debris.
• Inspect all bolts and fasteners for tightness.
• For long-term storage, drain the fuel tank and run the engine until it stops to clear the carburetor.
• Store the brushcutter in a dry, well-ventilated area, out of reach of children.

6. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү чечет.

If problems persist after attempting these solutions, please contact an authorized Stiga service center.

7. Техникалык шарттар

8. Кепилдик жана колдоо

Stiga products are manufactured to high quality standards and are guaranteed for a specific period from the date of purchase against manufacturing defects. Please retain your proof of purchase.

For warranty claims, technical support, or to locate an authorized service center, please visit the official Stiga website or contact your local dealer. Ensure you have your product model number (SBC 252 D) and part number (287421002/17) ready when contacting support.

Бул колдонмого киргизүү үчүн сатуучунун эч кандай расмий продукт видеолору жеткиликтүү эмес.