1. Продукт бүтүп калдыview
The LAUNCH CR-HD Plus is a versatile heavy-duty truck scanner and diagnostic scan tool designed for both diesel trucks and cars. It offers comprehensive diagnostic capabilities for various vehicle systems, supporting multiple protocols including J1587, J1708, J1939, and standard OBD II/EOBD/HOBD.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Covers Class 4 (14,001 lbs) through Class 8 (33,000 lbs and over) Heavy Duty Trucks.
- Includes 6-pin and 9-pin Deutsch connectors, plus OBDII 16-pin connectors.
- Supports J1587, J1939, and J1708 protocols for heavy-duty standards.
- Includes Generic/Global OBD II 16 PIN communication (cars and light trucks) - Modes 1-10.
- Ability to read and clear active and inactive fault codes, turn off Check Engine Light (MIL), clear codes, and reset monitors.
- Reads, records, graphs, and plays back live sensor data, including O2 sensor test data and EVAP data stream.
- Displays monitor and I/M readiness status (emissions).
- Provides coverage for Engine, Transmission, Brakes, and more via Heavy Duty Standard.
- Monitors all data and views live data streams for efficient engine health assessment and sensor location.
- Features a full-color 2.8" LCD Display with an extra-long 6.5 ft. cable.
- Comes with a padded storage case.
- Offers lifetime free internet updates.
2. Кутуда эмне бар
Пакетти ачкандан кийин, төмөнкү нерселердин бардыгы камтылганын текшериңиз:
- CR HD Plus Diagnostic Tool
- Колдонуучунун колдонмосу
- Padded Storage Case
- 6-pin Deutsch connector
- 9-pin Deutsch connector
3. Орнотуу колдонмосу
- Identify the Diagnostic Port: Locate the diagnostic port in your vehicle. For heavy-duty trucks, this is typically a 6-pin or 9-pin Deutsch connector. For cars and light trucks, it is usually a 16-pin OBDII port. Consult your vehicle's manual for the exact location.
- Select the Correct Connector: Choose the appropriate diagnostic connector (6-pin, 9-pin, or 16-pin) from the included accessories that matches your vehicle's port.
- Сканерди туташтыруу: Firmly connect the selected adapter to your vehicle's diagnostic port. Then, connect the other end of the adapter cable to the LAUNCH CR-HD Plus device.
- Күйгүзүү: Once connected, the device should power on automatically. If not, ensure the vehicle's ignition is in the ON position (engine off or running, depending on the diagnostic task).
- Баштапкы орнотуу: Follow the on-screen prompts for initial language selection and system settings if prompted.
4. Иштөө нускамалары
The LAUNCH CR-HD Plus offers various diagnostic functions. Navigate through the menus using the directional buttons and confirm selections with the 'Enter' button.
4.1 Коддорду окуу жана тазалоо
- From the main menu, select "Read Codes" or "Diagnostic" (menu options may vary slightly).
- The scanner will establish communication with the vehicle's ECU and display any active or pending Diagnostic Trouble Codes (DTCs).
- To clear codes, select "Clear Codes" from the menu. Confirm the action when prompted. Clearing codes will turn off the Check Engine Light (MIL) and reset monitor status.
4.2 Live Data Stream
Бул функция сизге мүмкүнчүлүк берет view real-time data from the vehicle's sensors and components.
- Select "Live Data" from the main menu.
- Сиз тандай аласыз view all data parameters or select specific ones.
- The data can be displayed in numerical, graph, or combined formats for easier analysis.
4.3 System Coverage
The LAUNCH CR-HD Plus provides OE-level diagnosis for various systems in heavy trucks, pickups, buses, and vans. This includes, but is not limited to:
- Мотор системасы
- Трансмиссия системасы
- Braking System (ABS, ESP)
- Поезд
- Токтотуу
- Cluster/Instrument Panel
- Чыгаруу системасы
- Күйүүчү май системасы
- Cab Climate
- Body Control
- Жана башкалар.
5. Техникалык тейлөө
To ensure the longevity and optimal performance of your LAUNCH CR-HD Plus, follow these maintenance guidelines:
- Тазалоо: жумшак колдонуу, damp Түзмөктү тазалоо үчүн чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
- Сактагыч: Store the scanner in its padded storage case when not in use to protect it from dust, moisture, and physical damage. Keep it in a dry, cool environment.
- Кабельге кам көрүү: Avoid bending or crimping the diagnostic cable excessively. Always grasp the connector ends when plugging or unplugging to prevent damage to the pins or cable.
- Программалык камсыздоо жаңыртуулары: Regularly check for and install software updates. The device offers lifetime free internet updates, which can improve compatibility, add new features, and fix bugs.
6. Кыйынчылыктарды
This section addresses common issues you might encounter while using the LAUNCH CR-HD Plus.
6.1 Түзмөк күйбөйт
- Ensure the diagnostic cable is securely connected to both the vehicle's DLC (Data Link Connector) and the scanner.
- Verify that the vehicle's ignition is turned ON.
- Унаанын аккумуляторунун көлөмүн текшериңизtage. A low battery might prevent the scanner from powering up or communicating correctly.
- Inspect the diagnostic port for any bent or damaged pins.
6.2 Байланыш катасы
- Confirm that the correct diagnostic connector (6-pin, 9-pin, or 16-pin) is being used for your vehicle type.
- Бардык байланыштар бекем жана коопсуз экендигин текшериңиз.
- Verify the vehicle's ignition is ON.
- Try connecting to a different vehicle (if available) to determine if the issue is with the scanner or the vehicle.
- Update the scanner's software to the latest version.
6.3 Incorrect Connector Fit (as seen in customer video)
A customer video highlighted an issue where the provided connector did not fit the vehicle's port, despite appearing similar. This can occur due to subtle differences in pin configuration or connector design between various vehicle models or manufacturing years.
If you encounter a connector fit issue:
- Шайкештикти текшерүү: Double-check the compatibility of the scanner and its connectors with your specific vehicle's make, model, and year. Refer to the product's compatibility list or contact LAUNCH customer support with your vehicle's VIN.
- Пиндерди текшерүү: Carefully compare the pin layout of your vehicle's diagnostic port with the connector. Even a slight difference in arrangement can prevent a proper connection.
- Колдоо издөө: If the provided connectors do not fit, contact LAUNCH customer support for assistance. They may be able to provide an alternative adapter or guidance.
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | ИШКЕ АЛУУ |
| Модел | CReader HD Plus |
| Элемент Салмагы | 1.9 фунт |
| Продукциянын өлчөмдөрү | 4.7 x 3 x 1 дюйм |
| Операция системасы | Linux |
| Колдоого алынган протоколдор | J1587, J1708, J1939, OBDII (Modes 1-10) |
| Дисплей | 2.8" Full Color LCD |
| Кабелдин узундугу | 6.5 фут |
| UPC | 712321438010 |
8. Кепилдик жана колдоо
The LAUNCH CR-HD Plus comes with a 2-year warranty and lifetime free software updates. For any technical assistance or inquiries, please refer to the following contact information:
- Электрондук почта колдоо: autoscope@163.com
- Онлайн колдоо: You can contact the seller through the product detail page on Amazon by clicking the seller's store name and then "Ask a question."
- Кепилдик мөөнөтү: 2 жыл
- Программалык камсыздоо жаңыртуулары: Lifetime Free Internet Updates
- Төлөмдү кайтаруу саясаты: 60 Days Unconditional Refund
