1. Продукт бүтүп калдыview
The Beam Electronics DGC2020 Car Phone Holder Mount is designed to securely hold your smartphone in your vehicle. It features a quick-release button for easy phone removal and a 360-degree rotating head for optimal viewing angles. This mount is compatible with a wide range of smartphones and electronic devices.
Негизги өзгөчөлүктөрү:
- Ыкчам чыгаруу баскычы: Press the button on the back to open the arms and retrieve your mobile phone. Press the arms together to clamp the phone securely.
- 360 градуска айлануу: The fully 360-degree rotation provides the best viewing angle for navigation, calls, or music.
- Кеңири шайкештик: Fits most cellphones and electronic devices with a width from 1.9 inches to 3.7 inches.
- Single-handed Operation: Designed for simple installation and removal of smartphones with no tools required.
Image 1.1: The Beam Electronics Car Phone Holder Mount securely installed in a vehicle's air vent, displaying a smartphone.
2. Орнотуу жана орнотуу
Follow these steps to properly install your car phone holder mount:
- Identify Compatible Air Vent: The mount is designed for horizontal or vertical air vents. Ensure your vehicle's vent type is compatible.
- Тоону тиркөө: Locate the clip mechanism on the back of the phone holder. Push the clip firmly onto one of the air vent blades.
- Клипти коргоо: On the back of the clip, there is a lever or knob to tighten the grip. Adjust it to ensure the mount is securely fastened to the vent and does not wobble.
Сүрөт 2.1: Жарылып кеткен view highlighting key components: adjustable side-grip arms, 360-degree rotatable pivot, quick-release button, and the cushioned air vent clip.
Image 2.2: Visual guide for compatible and incompatible car air vent designs for secure mounting.
Video 2.1: Demonstrates installation tips for the car phone holder mount in various car models, showing how to attach it to the air vent and adjust for optimal positioning.
3. Иштөө нускамалары
Телефонуңузду киргизүү:
- Gently pull open the adjustable side-grip support arms of the holder.
- Place your smartphone into the holder, ensuring it rests on the bottom support feet.
- Press the adjustable arms inward until they securely grip your phone. The arms will lock into place, holding your device firmly.
Телефонуңузду алып салуу:
- Locate the quick-release button on the back of the holder (refer to Image 2.1).
- Press the quick-release button. The side-grip arms will automatically slide open.
- Carefully remove your smartphone from the holder.
Image 3.1: A finger demonstrating the quick-release button on the back of the mount, which expands the arms for phone removal.
жөндөө Viewбурч:
The phone holder features a 360-degree rotatable pivot. Simply rotate the phone holder to achieve your desired vertical or horizontal viewing angle. Ensure the angle is adjusted before driving to avoid distraction.
Video 3.1: Shows the phone holder's adjustable side grips and 360-degree rotation, demonstrating how it securely holds various phone sizes and allows for flexible viewбурчтар.
Video 3.2: Illustrates the ease of use for the Beam Electronics car phone holder, including phone insertion, removal, and rotation, highlighting its sturdy grip.
4. Кароо жана тейлөө
- Тазалоо: Картуучуну жумшак менен сүртүңүз, гamp чаңды жана калдыктарды тазалоо үчүн кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонуудан алыс болуңуз.
- Текшерүү: Periodically check the air vent clip and phone gripping arms for any signs of wear or damage. Ensure all moving parts operate smoothly.
- Температура: While the product is designed to be heat and cold resistant, extreme temperatures can affect its longevity. Avoid prolonged exposure to direct sunlight or extreme cold when not in use.
5. Кыйынчылыктарды
- Mount feels loose on the vent: Ensure the tightening lever/knob on the back of the clip is fully engaged and tightened. Re-adjust if necessary.
- Phone is not held securely: Make sure the side-grip arms are fully closed around your phone. The holder is compatible with devices between 1.9 and 3.7 inches in width.
- Difficulty with quick-release button: Ensure the button is pressed firmly and completely. If it still sticks, check for any obstructions or debris.
6. Продукттун спецификациялары
| Өзгөчөлүк | Спецификация |
|---|---|
| Продукциянын өлчөмдөрү | 2.72 x 3.39 x 5.51 дюйм |
| Элемент Салмагы | 0.071 унция |
| Элемент моделинин номери | DGC2020 |
| Өзгөчөлүктөр | Adjustable, Cold Resistant, Heat Resistant, Rotatable |
| Түс | Боз, Кара |
| Шайкеш түзмөктөр | Смартфондор |
| Шайкеш телефон моделдери | iPhone 12, 11 Pro Max, XS, XR, X, 8+, 7+, SE, 6s, 6+, 5s, 4; Samsung Galaxy S6, HTC, LG, Nexus, Nokia (width 1.9 to 3.7 inches) |
| Монтаж түрү | Vent |
7. Кепилдик жана колдоо
This Beam Electronics Car Phone Holder Mount comes with a 1 жылдык кепилдик сатып алынган күндөн тартып. Бул кепилдик өндүрүштүк кемчиликтерди камтыйт жана буюмдун нормалдуу колдонууда белгиленгендей иштешин камсыздайт.
For warranty claims, technical support, or any inquiries regarding your product, please contact Beam Electronics customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number (DGC2020) ready when contacting support.
