Introduction
The Sun Joe GTS4002C is a versatile 3-in-1 24V cordless lawn care system designed to assist with various yard maintenance tasks. This system features three interchangeable tool heads: a pole saw, a hedge trimmer, and a string trimmer, along with a 5.3-foot extension pole. It is powered by a lightweight 24-Volt battery pack, offering portability and convenience for use in areas where power outlets are not readily available. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Sun Joe GTS4002C system.
Маанилүү коопсуздук маалыматы
WARNING: Proposition 65 Warning. This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Бул электр куралы менен берилген бардык коопсуздук эскертүүлөрүн, нускамаларды, иллюстрацияларды жана спецификацияларды ар дайым окуп, түшүнүңүз. Төмөндө саналып өткөн бардык көрсөтмөлөрдү аткарбоо электр тогуна, өрткө жана/же олуттуу жаракатка алып келиши мүмкүн.
- Жеке коргонуу каражаттары (ЖКК): Always wear appropriate eye protection (safety glasses), hearing protection, and heavy-duty gloves when operating the tool. Long pants and sturdy, non-slip footwear are also recommended.
- Жумуш аймагынын коопсуздугу: Жумушчу жерди таза жана жакшы жарыктандырыңыз. Башаламан же караңгы жерлер кырсыкка чакырат. Жарылуучу чөйрөдө, мисалы, күйүүчү суюктуктар, газдар же чаң бар жерде электр шаймандарын иштетпеңиз.
- Электр коопсуздугу: Түтүктөр, радиаторлор, диапазондор жана муздаткычтар сыяктуу жерге туташтырылган же жерге төшөлгөн беттерге денеге тийбеңиз. Денеңиз жерге туташтырылган же жерге туташтырылган болсо, электр тогуна урунуп калуу коркунучу жогору.
- Куралды колдонуу жана кам көрүү: Электр аспапты күчтөп албаңыз. Колдонмоңуз үчүн туура электр шайманын колдонуңуз. Туура электр инструменти ал иштелип чыккан ылдамдыкта ишти жакшыраак жана коопсуз кылат.
- Батарея топтомунун коопсуздугу: Өндүрүүчү көрсөткөн заряддагыч менен гана заряддаңыз. Батарея топтомунун бир түрүнө ылайыктуу заряддагыч башка батарея таңгагы менен колдонулганда өрт чыгуу коркунучун жаратышы мүмкүн.
- Тейлөө: Электр шайманыңызды квалификациялуу оңдоочуга бирдей алмаштыруучу бөлүктөрдү гана колдонуңуз. Бул электр инструментинин коопсуздугун камсыз кылат.
Пакеттин мазмуну
Upon unpacking your Sun Joe GTS4002C system, ensure all items are present and undamaged. The package typically includes:
- Main Power Handle with Extension Pole
- Pole Saw Attachment (8-inch bar and chain)
- Hedge Trimmer Attachment (17.7-inch blade)
- String Trimmer Attachment (10-inch cutting diameter)
- 2.0-Ah литий-иондук батарея
- Батарея заряддагыч
- Blade Cover for Hedge Trimmer
- Chain Scabbard for Pole Saw
- Пайдалануучунун колдонмосу (бул документ)
Figure 1: ашыкview of the Sun Joe GTS4002C system components, including the main power handle with extension pole, pole saw, hedge trimmer, and string trimmer attachments.
Жайгашуу
1. Батареяны кубаттоо
Before first use, fully charge the 24V lithium-ion battery. Connect the charger to a standard electrical outlet and then connect the battery to the charger. The charging indicator light on the charger will indicate the charging status. A full charge typically takes approximately one hour.
2. Attaching Tool Heads and Extension Pole
The Sun Joe GTS4002C features a quick-connect system for interchanging tool heads. Ensure the battery is removed before attaching or detaching any components.
- Connecting the Extension Pole: Align the male end of the extension pole with the female receptacle on the main power handle. Push firmly until it clicks into place. Ensure the locking mechanism is engaged.
- Attaching Tool Heads: Select the desired tool head (pole saw, hedge trimmer, or string trimmer). Align the connection point of the tool head with the end of the extension pole (or directly to the power handle if not using the extension). Push and twist until it locks securely. Verify the connection is firm before operation.
Figure 2: The multi-angle head feature allows for versatile positioning of the pole saw or hedge trimmer for various cutting tasks.
Иштөө нускамалары
Always ensure the battery is fully charged and securely inserted into the power handle before operation. Wear all recommended PPE.
1. Жалпы операция
- To start the tool, press and hold the safety lock-off button, then squeeze the trigger switch.
- Куралды токтотуу үчүн триггерди которгучту бошотуңуз.
- The 5.3-foot extension pole allows for extended reach, enabling you to trim high hedges or saw overhead limbs safely from the ground.
Figure 3: Demonstrates the extended reach capability of the Sun Joe system, allowing users to access higher branches.
2. Pole Saw Operation
The 8-inch pole saw is designed for cutting branches and limbs. It can cut through trunks, limbs, logs, and branches up to 7.5 inches wide.
- Ensure the chain is properly tensioned and lubricated with bar and chain oil before each use.
- Position the saw blade against the branch, ensuring a stable stance.
- Engage the saw and allow the chain to reach full speed before making contact with the wood.
- Make smooth, controlled cuts. Avoid forcing the saw, as this can lead to kickback or damage.
Figure 4: The 8-inch bar and chain attachment in action, demonstrating its capability to cut through tree branches.
5-сүрөт: үстүнкү view of the pole saw being used to cut a branch, highlighting its maneuverability for various tasks.
3. Hedge Trimmer Operation
The 17.7-inch hedge trimmer is designed for shaping and trimming hedges and shrubs. It effortlessly cuts branches up to 0.6 inches in diameter.
- Триммерди эки колуңуз менен бекем кармаңыз.
- Use a sweeping motion to cut, moving the blade along the hedge.
- Avoid cutting branches larger than the specified diameter to prevent damage to the blades.
- The multi-angle head allows for precise trimming at various angles.
Figure 6: The 17.7-inch hedge trimmer attachment in use, demonstrating its ability to trim dense foliage.
4. Жип триммеринин иштеши
The 10-inch string trimmer is ideal for trimming grass and edging lawns. It quickly converts from a trimmer to an edger.
- Hold the trimmer at a comfortable angle, keeping the cutting head parallel to the ground for trimming.
- For edging, rotate the head to a vertical position and guide it along the edge of sidewalks or flowerbeds.
- Maintain a safe distance from obstacles and ensure no one is in the immediate vicinity of the cutting line.
Figure 7: The 10-inch grass trimmer attachment being used for edging, showcasing its quick conversion capability.
Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your Sun Joe GTS4002C system.
- Тазалоо: After each use, remove the battery and clean the tool heads and main unit with a damp cloth. Remove any grass, sap, or debris from blades and cutting lines.
- Pole Saw Chain Maintenance: Regularly check the chain tension and lubricate the chain and bar with appropriate bar and chain oil. Sharpen the chain as needed or replace it when dull.
- Hedge Trimmer Blade Care: Keep the blades clean and free of sap and debris. Periodically apply a light machine oil to the blades to prevent rust and ensure smooth operation. If blades become dull, they may require sharpening by a professional.
- Триммердин жибин алмаштыруу: Replace the trimmer line when it runs out or becomes too short. Refer to the specific instructions for your trimmer head for proper line winding.
- Батареяны сактоо: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, ensure the battery is partially charged (not fully charged or fully depleted).
Проблемаларды чечүү
If you encounter issues with your Sun Joe GTS4002C, refer to the following common troubleshooting steps:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Курал башталбайт. | Батарея заряддалган эмес же туура салынган эмес. Коопсуздук кулпусу иштетилген эмес. | Батарея толук заряддалганын жана коопсуз салынганын текшериңиз. Ишти кысуудан мурун коопсуздукту өчүрүү баскычын басыңыз. |
| Төмөндөтүлгөн кесүү натыйжалуулугу. | Dull blades/chain. Incorrect chain tension. Overgrown material. | Sharpen or replace blades/chain. Adjust chain tension. Do not attempt to cut material exceeding recommended diameter. |
| String trimmer line breaks frequently. | Incorrect line type. Cutting against hard surfaces. | Use recommended line diameter. Avoid contact with concrete, rocks, or fences. |
| Курал өтө ысып кетет. | Continuous heavy use. Blocked vents. | Allow tool to cool down. Clear any debris from ventilation openings. |
Эгерде бул чечимдерди колдонуп көргөндөн кийин көйгөйлөр чечилбесе, Sun Joe кардарларды колдоо кызматына кайрылыңыз.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Sun Joe |
| Модель номери | GTS4002C |
| Power Source | Батарея менен иштейт (24V литий-ион) |
| Продукциянын өлчөмдөрү (L x W x Y) | 10"L x 8"W x 40"H (assembled) |
| Элемент Салмагы | 7.7 фунт |
| Pole Saw Bar Length | 8 дюйм |
| Тосмо кыркуучу бычактын узундугу | 17.7 дюйм |
| Тосмо кыркуучу түзүлүштүн кесүү туурасы | 0.6 дюйм |
| String Trimmer Cutting Diameter | 10 дюйм |
| Узартуу мамысынын узундугу | 5.3 Feet (approximate) |
| Материал | Пластик жана металл |
| UPC | 842470102217 |
Кепилдик жана Кардарларды колдоо
Your Sun Joe GTS4002C lawn care system is backed by the Snow Joe + Sun Joe customer promise. New products are warranted for two years from the date of purchase. For further assistance, questions, or warranty claims, please contact Snow Joe + Sun Joe customer support at 1-866-766-9563.
Расмий продукт Videos
No official product videos with relevant creator type (Seller) and accessible URLлар бул колдонмого киргизүү үчүн берилген продукт маалыматтарында табылган.
