1. Киришүү
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Norton TR202 Tile Saw. Please read this manual thoroughly before assembly, operation, or maintenance to ensure proper use and to prevent injury or damage to the equipment.
The Norton TR202 is a 900W tile saw designed for precise cutting of various tile materials using a 200mm disc. It operates on 230V electrical power.
2. Коопсуздук нускамалары
Электр шаймандарын иштетүүдө ар дайым коопсуздукка артыкчылык бериңиз. Бул нускамаларды аткарбоо олуттуу жаракатка же мүлккө зыян келтириши мүмкүн.
- Жеке коргонуу каражаттары (ЖКК): Always wear safety glasses, hearing protection, and appropriate work gloves. A dust mask is recommended when cutting dry.
- Электр коопсуздугу: Ensure the power supply matches the saw's requirements (230 Volts, 900 Watts). Use a ground fault circuit interrupter (GFCI) when operating in wet conditions. Do not operate with wet hands or in standing water.
- Бычактын коопсуздугу: Ensure the 200mm cutting disc is correctly installed and secured before operation. Never attempt to cut without the blade guard in place. Allow the blade to reach full speed before beginning a cut.
- Иш чөйрөсү: Жумушчу жерди таза, жакшы жарык жана тоскоолдуктардан алыс кармаңыз. Адекваттуу вентиляцияны камсыз кылыңыз.
- Туруктуулук: Ensure the saw is placed on a stable, level surface. The integrated stand provides stability.
- Материалды иштетүү: Secure the workpiece firmly. Never force the saw through material.
- Тейлөө: Тейлөө, жөндөө же бычактарды алмаштыруудан мурун электр кубатын өчүрүңүз.
3. Components Overview
Familiarize yourself with the main components of your Norton TR202 Tile Saw.
3.1-сүрөт: Жалпысынан view of the Norton TR202 Tile Saw on its stand.
The image above shows the complete tile saw assembly, including the cutting head, sliding table, water tray, and integrated stand with wheels for mobility.
Figure 3.2: Close-up of the cutting head, blade, and water feed line.
Бул view highlights the 200mm cutting disc, the protective blade guard, the motor housing, and the clear tubing for the water cooling system, which is essential for wet cutting.
Figure 3.3: Detail of the sliding cutting table with measurement guides and adjustable fence.
The sliding table allows for smooth movement of the tile during cutting. The integrated ruler and adjustable fence assist in making accurate, repeatable cuts.
Figure 3.4: Bevel angle adjustment mechanism.
This mechanism allows the cutting head to be tilted for bevel cuts, up to 45 degrees, providing versatility for various tile installations.
Figure 3.5: Included tools for assembly and maintenance.
The saw comes with essential tools, including wrenches and a screwdriver, for assembly, blade changes, and minor adjustments.
4. Орнотуу
4.1 Таңгактан чыгаруу жана чогултуу
- Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
- Assemble the stand according to the diagrams provided in the separate assembly guide (if applicable). Ensure all fasteners are securely tightened.
- Mount the tile saw unit onto the assembled stand, ensuring it is stable and level.
4.2 Чачты орнотуу
- Арааны электр кубатынан ажыратыңыз.
- Бычак коргоочу капкагын алып салыңыз.
- Using the provided wrenches, loosen the arbor nut and remove the outer flange.
- Place the 200mm diamond cutting disc onto the arbor, ensuring the rotation arrow on the blade matches the direction of rotation indicated on the saw.
- Сырткы фланецти кайра орнотуп, арбор гайканы бекем бекемдеп тартыңыз. Ашыкча катуулабаңыз.
- Replace the blade guard cover.
4.3 Суу менен камсыздоого кошулуу
- Fill the water tray with clean water to the recommended level.
- Ensure the water pump is submerged and the water feed lines are properly connected to direct water onto the blade during operation.
4.4 Электрдик туташуу
- Verify that the power switch is in the 'OFF' position.
- Plug the saw into a properly grounded 230V electrical outlet protected by a GFCI.
5. Иштөө нускамалары
5.1 Күйгүзүү/өчүрүү
- To turn on: Press the green 'ON' button.
- To turn off: Press the red 'OFF' button.
5.2 Кесүү тереңдигин жана бурчун тууралоо
- Кесүү тереңдиги: The cutting depth is generally fixed by the blade's position relative to the table. For specific adjustments, consult the saw's mechanical adjustment points.
- Cutting Angle (Bevel): Loosen the locking knob for angle adjustment (refer to Figure 3.4). Tilt the motor head to the desired angle (up to 45 degrees). Tighten the locking knob securely before cutting.
5.3 Кесүү
- Ensure the water tray is filled and the pump is operating, providing water to the blade.
- Place the tile firmly against the adjustable fence on the sliding table.
- Align the cutting line on the tile with the blade.
- Арааны күйгүзүңүз жана бычактын толук иштөө ылдамдыгына жетүүгө мүмкүнчүлүк бериңиз.
- Slowly and steadily push the sliding table forward, guiding the tile through the blade. Do not force the cut.
- Once the cut is complete, retract the table and turn off the saw. Wait for the blade to stop completely before removing the cut tile.
6. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө плитка арааңыздын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Тазалоо: After each use, disconnect power and clean the saw thoroughly. Remove tile dust and debris from the table, water tray, and motor housing.
- Суу системасы: Regularly clean the water tray and pump to prevent clogging from tile slurry. Replace water frequently.
- Бычак текшерүү: Inspect the 200mm blade for wear, damage, or dullness. Replace worn blades promptly.
- Электр зымы: Check the power cord for any signs of damage. Do not use the saw if the cord is frayed or damaged.
- Кыймылдуу бөлүктөр: Keep sliding parts clean and lubricated as recommended by the manufacturer (if applicable).
7. Кыйынчылыктарды
Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Сау башталбайт | No power, faulty switch, tripped GFCI | Check power connection, reset GFCI, inspect power cord. |
| Кесүү сапаты начар / Жай кесүү | Dull or incorrect blade, insufficient water, forcing the cut | Replace blade, ensure adequate water flow, reduce feed pressure. |
| Ашыкча термелүү | Loose blade, damaged blade, unstable saw | Tighten blade, replace damaged blade, ensure saw is on a stable surface. |
| No water flow to blade | Empty water tray, clogged pump/lines | Refill water tray, clean pump and water lines. |
8. Техникалык шарттар
Key technical specifications for the Norton TR202 Tile Saw.
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | Нортон |
| Модель номери | 70184601106 |
| Ватtage | 900 ватт |
| Тtage | 230 вольт |
| Power Source | Электр зымдары |
| Бычактын материалы | Aluminium Oxide or Carbide (for cutting disc) |
| Диск диаметри | 200mm (implied by product title) |
| Кесүү бурч | 45 градуска чейин |
| Элемент Салмагы | 2.2 pounds (Note: This weight seems unusually low for a tile saw and may refer to a component, not the full unit.) |
| Продукциянын өлчөмдөрү | 19.69 x 19.69 x 11.02 дюйм |
| Камтылган компоненттер | Bare Tool (plus standard accessories like blade, pump, stand, tools) |
9. Кепилдик жана колдоо
For warranty information, please refer to the documentation included with your purchase or contact the retailer or manufacturer directly. Specific warranty terms and conditions may vary.
For technical support, spare parts, or service inquiries, please contact your authorized Norton dealer or the manufacturer's customer service department.
10. Расмий продукт Videos
Учурда сатуучунун расмий продукт видеолору кыстаруу үчүн жеткиликтүү эмес.
