Introduction
The Nilight NI-FH01 Inline Fuse Holder is a high-quality electrical component designed for automotive applications. It provides a secure and water-resistant housing for ATC/ATO blade fuses, ensuring circuit protection and reliable performance in various vehicles. This manual provides essential information for the proper installation, operation, and maintenance of your fuse holder.
Image: A single Nilight NI-FH01 Inline Fuse Holder with a green 30A fuse, showcasing its waterproof cap. In the background, a pack of ten identical fuse holders is visible.
Продукт өзгөчөлүктөрү
- Коопсуздукту коргоо: Features heavy-duty 14 gauge (AWG) red color wire for enhanced circuit protection.
- Suitable Fuses: Compatible with 0.5A, 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuses with dimensions of 19.1 x 18.5 x 5.1 mm.
- Суу каршылык: Equipped with a tight-fitting waterproof lid, offering excellent damp-proof and waterproof performance for safe and reliable use.
- Премиум сапаты: Constructed from high-quality copper materials to ensure good bending performance, melting resistance, and excellent electrical conductivity.
Пакеттин мазмуну
Each package of the Nilight NI-FH01 Inline Fuse Holder includes:
- 10 x 14AWG ATC/ATO Inline Fuse Holders
Техникалык шарттар
| Спецификация | Деталь |
|---|---|
| Бренд | Nilight |
| Модел | NI-FH01 |
| Зым өлчөгүч | 14 AWG |
| Loop Length | 12 дюйм |
| Колдоого алынган сактагыч түрү | ATC/ATO Blade Fuse |
| Колдоого алынган Ampөчүрүү | 0.5A, 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A |
| Fuse Dimension Fit | 19.1 x 18.5 x 5.1 мм |
| Тtage | 12 Volts (DC Current) |
| Материал | Жез |
| Продукциянын өлчөмдөрү (L x W x Y) | 5 x 1 x 3 дюйм |
| Элемент Салмагы | 3.2 унция |
Image: A visual representation of the product specifications, including type, wire gauge, loop length, supported fuse types, dimensions, and certifications.
Коопсуздук маалыматы
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Always handle with care and ensure proper ventilation. For electrical installations, always disconnect the power source before working on circuits to prevent electrical shock or damage. Ensure the fuse amperage matches the circuit requirements to prevent overloading and potential fire hazards.
Орнотуу жана орнотуу
The Nilight NI-FH01 Inline Fuse Holder is designed for straightforward installation in 12V DC automotive electrical systems. Follow these steps for proper setup:
- Зымдарды даярдоо: The fuse holder comes with 14 AWG red insulated wire. Determine the desired length for your application. If shortening the wire, carefully strip the insulation from the ends to expose the copper conductors.
- Insert the Fuse: Open the water-resistant cap of the fuse holder. Insert an appropriate ATC/ATO blade fuse (0.5A to 30A) into the designated slot. Ensure the fuse is securely seated.
- Капкакты жабуу: Firmly close the water-resistant cap over the fuse. This cap provides damp-proof and waterproof protection, safeguarding the fuse from dirt and road splash.
- Circuit менен туташуу: Integrate the fuse holder into your 12V DC circuit. The 14 AWG wire is suitable for various connections in cars, Jeeps, ATVs, UTVs, SUVs, 4X4s, motorcycles, trucks, and RVs. Ensure all connections are secure and properly insulated.
- Кармоочуну камсыз кылуу: Position the fuse holder in a safe location away from moving parts or excessive heat. Its compact design allows for flexible placement.
Image: The fuse holder's 12-inch wire loop is shown, with a pair of scissors indicating where the wire can be cut to customize length.
Image: A hand demonstrates the ease of use by inserting a fuse into the holder and then closing its protective waterproof cover.
Image: A composite image showing four different angles of the fuse holder, highlighting its internal contacts, the open and closed states of the cap, and the exposed copper strands of the wire.
Image: The fuse holder is shown integrated into an electrical circuit, connected to other components on a wooden board, demonstrating a typical installation scenario.
Иштөө нускамалары
Once installed, the Nilight NI-FH01 Inline Fuse Holder operates passively to protect your electrical circuit. It does not require any user interaction for its primary function. The fuse inside will automatically break the circuit if an overcurrent condition occurs, preventing damage to your vehicle's electrical components.
Техникалык тейлөө
Regular maintenance ensures the longevity and effectiveness of your fuse holder:
- Мезгилдүү текшерүү: Periodically check the fuse holder and its connections for any signs of wear, corrosion, or damage. Ensure the cap remains tightly sealed.
- Сактагычты алмаштыруу: If a fuse blows, identify and resolve the underlying electrical issue before replacing it. Always replace a blown fuse with a new fuse of the exact same amperage rating and type (ATC/ATO blade fuse). Using a fuse with a higher rating can lead to serious electrical damage or fire.
- Тазалоо: Keep the fuse holder clean and free from dirt, dust, and moisture. Use a dry cloth to wipe down the exterior.
Проблемаларды чечүү
If your electrical circuit is not functioning, consider the following troubleshooting steps related to the fuse holder:
- Түзмөккө кубат жок: Check if the fuse inside the holder is blown. A blown fuse will have a broken filament. Replace it if necessary, but investigate the cause of the blow.
- Repeatedly Blown Fuses: If fuses repeatedly blow, it indicates an underlying electrical problem such as a short circuit, an overloaded circuit, or a faulty component. Consult a qualified automotive electrician to diagnose and repair the issue.
- Бошоң байланыштар: Ensure all wire connections to and from the fuse holder are secure and tight. Loose connections can cause intermittent power, heat buildup, and poor performance.
- Коррозия: Inspect the fuse holder terminals and the fuse itself for any signs of corrosion. Corrosion can impede electrical flow. Clean corroded terminals with a suitable electrical contact cleaner.
Кепилдик жана колдоо
The Nilight NI-FH01 Inline Fuse Holder comes with a 2 жылдык кепилдик from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any inquiries regarding your product, please contact Nilight customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty validation.
For more information and support, visit the official Nilight Store: Nilight Store on Amazon
