Introduction
This manual provides detailed instructions for the Walfront Multi-Output DC-DC Voltage Converter Power Supply Module. This module is designed to convert a DC input voltage into multiple stable DC output voltages, specifically 3.3V, 5V, and 12V. It is suitable for various electronic projects requiring different voltage levels from a single power source.
Продукт өзгөчөлүктөрү
- Versatile Input: Accepts a single DC input voltage 6Вдан 12Вга чейин.
- Үчтүк чыгаруу: туруктуу чыгарууну камсыз кылатtages of 3.3V, 5.0V, and 12V.
- Компакт дизайн: Features a double-sided board design for practical and professional integration into projects.
- Оңой монтаждоо: Includes two pin fixing holes for direct mounting on extended breadboard experiments.
- Күч көрсөткүчү: Equipped with a red LED power indicator for quick status checks.
- Simple Connectivity: Multi-output input and output pins ensure easy and flexible connections.
Техникалык шарттар
| Киргизүү көлөмүtage | Туруктуу ток 6V - 12V |
| Output Voltage | 3.3V (±0.05V), 5V (±0.05V), 12V (direct pass-through from 12V input) |
| Максималдуу чыгаруу ток | 800mA (total load current must not exceed 800mA) |
| Өлчөмдөрү (L x W x Y) | 32 мм x 32 мм x 13 мм (1.26 дюйм x 1.26 дюйм x 0.51 дюйм) |
| Материал | Металл, пластик |
| Кубат булагынын түрү | Зымдуу электр |
| Батареялар талап кылынган/камтылган | Жок |
Сүрөт: бурчтуу view of the Walfront DC-DC converter module, illustrating its compact dimensions of 32mm x 32mm x 13mm.
Жайгашуу
Before connecting the module, ensure all power sources are disconnected. Observe proper polarity when making connections.
- Киргизүү кубаттуулугун туташтыруу: Connect your DC power source (6V to 12V) to the DC-IN jack or the DC-IN/OUT pins. Ensure the input voltage is at least 1V higher than your desired output voltage for stable regulation.
- Чыгуу туташуулары:
- For 3.3V output, connect your device to the "3V3 OUT" pins and corresponding "GND" pins.
- For 5V output, connect your device to the "5V OUT" pins and corresponding "GND" pins.
- For 12V output, connect your device to the "12V OUT" pins and corresponding "GND" pins. Note that the 12V output is a direct pass-through from the input when the input is 12V.
- Монтаждоо: The module can be mounted using the two fixing holes provided, suitable for breadboard or custom enclosure integration.
Сүрөт: жогорудан төмөнгө view of the Walfront DC-DC converter module, highlighting the input and output pins, DC jack, and power switch for clear identification during setup.
Иштөө нускамалары
Once all connections are securely made, follow these steps to operate the module:
- Күйгүзүү: Connect your DC power source to the module.
- Activate Module: Flip the blue switch (S1) on the module to the "ON" position.
- Күчтү текшерүү: The red LED indicator light will illuminate, confirming that the module is receiving power and is active.
- Check Output: Use a multimeter to verify the output voltages at the respective 3.3V, 5V, and 12V output pins before connecting sensitive components.
- Өчүрүү: To turn off the module, flip the blue switch (S1) to the "OFF" position and then disconnect the input power source.
Сүрөт: бурчтуу view of the module, illustrating the DC input jack and the blue power switch (S1) for easy identification during operation.
Техникалык тейлөө
The Walfront DC-DC Voltage Converter Module requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- Тазалыкты сактоо: Regularly clean the module with a dry, soft cloth to remove dust and debris. Avoid using liquids or abrasive cleaners.
- Сактагыч: Store the module in a dry, cool environment, away from direct sunlight and extreme temperatures.
- Этияттык менен мамиле кылуу: Avoid dropping or subjecting the module to physical shock, as this can damage internal components.
- Байланыштарды текшерүү: Periodically check all connections for looseness or corrosion. Ensure pins are straight and not bent.
Проблемаларды чечүү
If you encounter issues with your Walfront DC-DC Voltage Converter Module, refer to the following troubleshooting steps:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| No power indicator light (LED off) |
|
|
| Туура эмес чыгаруу томtage |
|
|
| Module gets excessively hot |
|
|
Пакеттин мазмуну
Пакетке төмөнкүлөр кирет:
- 1 x Walfront Multi-Output DC-DC Voltage Converter Power Supply Module
Коопсуздук маалыматы
Please read and understand the following safety precautions before using the module:
- This module is intended for use by individuals with knowledge of electronics. Improper use can lead to damage to the module or connected devices.
- Максималдуу киргизүү көлөмүн ашпаңызtage of 12V DC or the maximum output current of 800mA.
- Ensure correct polarity when connecting power. Reverse polarity can cause irreversible damage.
- Avoid short circuits on the output pins.
- Keep the module away from water, moisture, and conductive materials.
- If the module shows signs of damage or malfunction, discontinue use immediately.
Кепилдик жана колдоо
Walfront products are designed for reliability and performance. For specific warranty details or technical support, please refer to the retailer's policy or contact Walfront customer service directly. Keep your purchase receipt for warranty claims.
