Walfront DC 12V Infinite Cycle Delay Timing Timer Relay Instruction Manual

1. Киришүү

The Walfront DC 12V Infinite Cycle Delay Timing Timer Relay is a versatile module designed for precise control of electrical circuits. It features an LED display for easy monitoring and adjustable "on" and "off" times for infinite loop cycling. This module is ideal for applications requiring repetitive power switching, such as equipment burn-in tests, intermittent pump control, and various automation projects.

Негизги өзгөчөлүктөрү:

• Жогорку тактык: Utilizes an MCU as the main chip for accurate timing.
• Infinite Loop Mode: Configurable "on" and "off" periods for continuous cycling.
• Жөнгө салынуучу убакыт: Wide time range with adjustable "on" and "off" durations.
• Компакт дизайн: Easy to carry, store, and integrate into various setups.
• Кеңири колдонуу: Suitable for timer operating equipment, repetitive testing circuits, and fish tank intermittent pumps.

2. Орнотуу

2.1 Продукт бүттүview

Сүрөт 1: Walfront DC 12V Infinite Cycle Delay Timing Timer Relay Module. This image shows the overall view of the timer relay module, highlighting its compact size and LED display.

Сүрөт 2: Dimensions of the Walfront DC 12V Timer Relay Module. The module measures 65mm in length, 36mm in width, and 18mm in height, indicating its compact form factor.

2.2 Электр байланыш схемалары

Proper wiring is crucial for the safe and correct operation of the timer relay. Refer to the following diagrams for connecting the module to your power supply and load appliance.

Сүрөт 3: DC 12V Load Appliance Wiring Diagram. This diagram illustrates how to connect a DC 12V power supply and a DC 12V load appliance to the timer relay module. Ensure correct polarity (+DC and -DC) for the power supply and connect the load between the COM and NO (Normally Open) terminals of the relay.

Сүрөт 4: Other Voltage Load Appliance Wiring Diagram. This diagram shows how to connect a DC 12V power supply to the module, while controlling a load appliance with a different voltage (DC 0-30V or AC 0-250V). The load is connected between the COM and NO terminals, with its own power source.

Сүрөт 5: DC 12V Programmable Delay Timer Switch. This image highlights the NO (Normally Open), COM (Common), and NC (Normally Closed) terminals of the relay, along with the DC 12V power input terminals. The LED display indicates the current state and timing.

3. Иштөө нускамалары

The Walfront timer relay is programmed using its onboard buttons. The following instructions detail the programming process.

3.1 Programming the Timer (K1 & K2 Buttons)

The Walfront timer relay is programmed using the K1 and K2 buttons. K1 is used to select the digit or parameter, and K2 is used to adjust its value. The programming involves setting the "ON" time (connect time) and "OFF" time (disconnect time) for the infinite cycle mode.

1. Күйгүзүү: Apply DC 12V power to the module. The LED display will show the current time.
2. Орнотуу режимине кириңиз: Басыңыз K1 repeatedly to cycle through the settings. The display will show six cycles: the first three for setting the "ON" time, and the latter three for setting the "OFF" time.
3. Set "ON" Time (t1):
   • Басыңыз K1 to select the hundreds digit (e.g., X00). The digit will flash.
   • Басыңыз K2 to adjust the value of the flashing digit.
   • Басыңыз K1 to select the tens digit (e.g., 0X0). Adjust with K2.
   • Басыңыз K1 to select the units digit (e.g., 00X). Adjust with K2.
4. Set "OFF" Time (t2): Repeat the steps above for the next three cycles to set the hundreds, tens, and units digits for the "OFF" time.
5. Adjust Time Range (Decimal Point):
   • While the timer is counting down to "OFF" (after setting "ON" time), press K2 to adjust the decimal point for the "ON" time range:
     • No decimal point: 0 to 999 seconds
     • Decimal point after the second digit (e.g., 99.9): 0 to 99.9 seconds
     • Decimal point after the third digit (e.g., 999.): 0 to 999 minutes
   • Wait until the timer clicks "OFF" and starts counting down to "ON" again.
   • Басыңыз K2 to adjust the decimal point for the "OFF" time range, using the same logic as above.
6. Жөндөөлөрдү сактоо: The settings are automatically saved once the decimal point is selected for both "ON" and "OFF" times.
7. Toggle LED Display: Узак басуу K2 to turn the LED display off/on to reduce power consumption.

Note: The maximum "ON" time is 999 minutes, and the maximum "OFF" time is 99.9 seconds for some versions of this module. Please verify your module's specific capabilities.

4. Техникалык тейлөө

The Walfront DC 12V Timer Relay Module is designed for durability and requires minimal maintenance. To ensure optimal performance and longevity:

• Тазалыкты сактоо: Periodically clean the module with a dry, soft cloth to remove dust and debris. Avoid using liquids or abrasive cleaners.
• Экологиялык шарттар: Модулду көрсөтүлгөн температура жана нымдуулук диапазондорунда иштетиңиз. Ашыкча температурага, нымдуулукка же коррозиялуу чөйрөлөргө дуушар болбоңуз.
• Коопсуз байланыштар: Regularly check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.
• Электр камсыздоо: Ensure a stable DC 12V power supply is used. Fluctuations or incorrect voltage can affect performance and lifespan.

5. Кыйынчылыктарды

If you encounter issues with your Walfront DC 12V Timer Relay Module, refer to the following common troubleshooting tips:

• Модуль күйбөйт:
  • Verify the DC 12V power supply is correctly connected and providing the specified voltage.
  • Check for loose wires or incorrect polarity at the power input terminals.
• LED дисплей иштебей жатат:
  • Модуль күйгүзүлгөнүн текшериңиз.
  • If the display is off, try a long press on the K2 button to toggle it on.
• Difficulty Setting Timing Parameters:
  • Ensure you are in the correct setting mode (display flashing after pressing K1).
  • Follow the K1/K2 button sequence carefully for digit selection and value adjustment.
  • Confirm the decimal point position is correctly set for your desired time range (seconds, 0.1 seconds, minutes).
• Timer Not Executing Configured Function:
  • Double-check that the settings were saved correctly after programming.
  • If using a trigger input, ensure the trigger signal is correctly applied and detected by the module.
  • Verify the load is correctly connected to the COM and NO terminals and its power source is functional.
• Күтүлбөгөн жүрүм-турум:
  • Disconnect and reconnect power to reset the module.
  • Re-program the desired function and parameters.

Көбүрөөк жардам алуу үчүн, колдоо бөлүмүнө кайрылыңыз.

6. Техникалык шарттар

7. Кепилдик жана колдоо

Walfront products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact your retailer. If you experience any issues or require technical assistance with your DC 12V Infinite Cycle Delay Timing Timer Relay, please contact Walfront customer support through the retailer's platform or visit the official Walfront store on Amazon for more resources.

Walfront Store: Visit the Walfront Store on Amazon