Introduction
Thank you for choosing 3M SecureFit SF200 Safety Eyewear. This manual provides essential information for the proper use, maintenance, and care of your safety glasses. Please read this manual thoroughly before using the product to ensure optimal protection and longevity.
Коопсуздук маалыматы
These safety glasses are designed to help protect eyes from moderate impact hazards. They meet the requirements of ANSI Z87.1-2010 standards for personal eye and face protection devices. Always inspect the eyewear before each use for any signs of damage, such as scratches, cracks, or loose parts. Do not use damaged eyewear. Replace immediately if damaged.
Эскертүү: This product does not provide unlimited protection. It is not suitable for protection against severe impact hazards, chemical splashes, or harmful radiation. Always ensure the eyewear fits properly and covers the eyes completely.
Продукт бүттүview
The 3M SecureFit SF200 Safety Eyewear features a lightweight design with 3M Pressure Diffusion Temple Technology, which allows the temples to naturally self-adjust to an individual's head size. The anti-fog coating helps maintain clear vision in humid or changing temperature environments. The gray lens is suitable for outdoor use, reducing glare and providing UV protection.
Figure 1: 3M SecureFit SF200 Safety Eyewear in its original packaging, highlighting the lightweight and self-adjusting features, and compliance with ANSI Z87.1-2010 standards.
Негизги өзгөчөлүктөрү:
- Anti-Fog Coating: Helps prevent fogging in various conditions.
- SecureFit Technology: Self-adjusting temples for a comfortable and secure fit.
- Жеңил дизайн: Enhances comfort during extended wear.
- Gray Lens: Ideal for outdoor applications, offering glare reduction and UV protection.
- ANSI Z87.1-2010 Compliant: Meets industry safety standards.
Жайгашуу
No assembly is required for the 3M SecureFit SF200 Safety Eyewear. Simply remove the eyewear from its packaging. Before first use, and before each subsequent use, perform a visual inspection:
- Inspect the lenses for any scratches, cracks, or haziness that could impair vision or compromise protection.
- Check the temples (arms) for any signs of damage or stress.
- Ensure the eyewear is clean and free from debris.
If any damage is observed, do not use the eyewear. Replace it with a new pair.
Иштеп жатат
To wear the 3M SecureFit SF200 Safety Eyewear:
- Hold the eyewear by the temples.
- Gently place the eyewear over your eyes, ensuring the lenses cover your entire field of vision.
- The SecureFit technology will automatically adjust the temples to provide a comfortable and secure fit without manual adjustment.
- Ensure there are no gaps between the eyewear and your face that could allow hazards to enter.
Always wear safety eyewear when working in environments where eye hazards are present. Remove eyewear carefully by holding the temples to avoid touching the lenses and transferring oils or dirt.
Техникалык тейлөө
Тазалоо:
To clean your 3M SecureFit SF200 Safety Eyewear:
- Rinse the eyewear under lukewarm running water to remove loose dirt and debris.
- Apply a mild soap or lens cleaning solution.
- Gently rub the lenses and frame with a soft, lint-free cloth.
- Таза суу менен жакшылап чайкаңыз.
- Air dry or gently blot dry with a clean, soft, lint-free cloth.
Do not use abrasive cleaners, solvents, or paper towels, as these can scratch the lenses or damage the anti-fog coating.
Сактагыч:
Store the eyewear in a clean, dry place away from direct sunlight and extreme temperatures. Using a protective case or pouch can help prevent scratches and damage when not in use.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Линзалар туманданып жатат | High humidity, temperature changes, dirt/oils on lens, compromised anti-fog coating. | Clean lenses thoroughly as per maintenance instructions. Ensure proper ventilation if possible. If anti-fog coating is worn, replace eyewear. |
| Eyewear feels loose or uncomfortable | Improper fit, damaged temples. | Ensure eyewear is positioned correctly on the face. The SecureFit technology should self-adjust. If temples are damaged, replace eyewear. |
| Scratches on lenses | Improper cleaning, abrasive contact, poor storage. | Scratches cannot be removed. Replace eyewear immediately as scratches can impair vision and reduce protection. Store in a protective case. |
Техникалык шарттар
- Модел: SF200-LV4
- Бренд: 3M
- Линзанын түсү: Боз
- Каптоо: Туманга каршы
- Шайкештик: ANSI Z87.1-2010
- Элемент Салмагы: 1 фунт
- Бөлүм: Unisex
- Өндүрүүчү: 3M
- ASIN: B075BHQFVT
- Биринчи жеткиликтүү: 6-декабрь, 2016-жыл
Кепилдик жана колдоо
3M products are manufactured to high standards. For specific warranty information or technical support, please refer to the official 3M website or contact 3M customer service directly. Keep your purchase receipt as proof of purchase.
Көбүрөөк маалымат алуу үчүн, киргиле Amazon'догу 3M дүкөнү.