FIBARO FGT-001 Z-Wave Plus акылдуу жылытуу радиаторунун термостаты колдонуучунун колдонмосу

1. Киришүү

This manual provides comprehensive instructions for the installation, operation, and maintenance of your FIBARO FGT-001 Z-Wave Plus Smart Heating Radiator Thermostat. The FIBARO Heat Controller is designed to provide precise temperature management for your home, integrating seamlessly with Z-Wave smart home systems. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Image 1.1: The FIBARO FGT-001 Z-Wave Plus Smart Heating Radiator Thermostat and its retail packaging.

2. Коопсуздук маалыматы

• Колдонуудан мурун бардык нускамаларды кунт коюп окуп чыгыңыз.
• Түзмөктү өз алдынча оңдоого же өзгөртүүгө аракет кылбаңыз. Бардык тейлөө иштерин квалификациялуу адистерге тапшырыңыз.
• Аппаратты суудан жана жогорку нымдуулуктан алыс кармаңыз.
• Аппаратты экстремалдык температурага же тике күн нуруна калтырбаңыз.
• Ensure the device is securely installed on the radiator valve.
• Батареяларды жергиликтүү эрежелерге ылайык жок кылыңыз.

3. Пакеттин мазмуну

The FIBARO FGT-001 package typically includes:

• FIBARO Heat Controller Head (FGT-001)
• Колдонуучунун Колдонмосу (бул документ)
• Adapters for various radiator valves (M30 x 1.5, Danfoss RTD-N, Danfoss RA-N) - Note: Specific adapters may vary by region or package.

4. Продукт бүтүп калдыview

The FIBARO Heat Controller is a smart radiator thermostat designed to regulate the temperature in rooms by controlling the flow of hot water through the radiator. It features Z-Wave Plus connectivity for integration into smart home systems, allowing for remote control and automation. The device is powered by a built-in rechargeable battery.

Негизги өзгөчөлүктөрү:

• Z-Wave Plus Compatibility: Works with any Z-Wave or Z-Wave+ Controller.
• Коопсуздук режимдери: Supports S0 with AES-128 encryption and S2 with PRNG-based encryption.
• Кайра заряддалуучу батарея: Built-in battery recharged via a standard micro-USB port.
• Клапан шайкештиги: Designed for M30 x 1.5, Danfoss RTD-N, and Danfoss RA-N valves.
• LED көрсөткүчү: Features an LED ring that changes color to indicate temperature settings.

Image 4.1: A hand manually adjusting the FIBARO Heat Controller on a radiator valve.

Image 4.2: The FIBARO Heat Controller displaying a target temperature of 18°C.

5. Орнотуу жана орнотуу

5.1. Аппаратты заряддоо

Before installation, ensure the device's built-in battery is fully charged. Connect a standard micro-USB cable to the charging port on the device. The LED indicator will show charging status.

5.2. Mounting on Radiator Valve

The FIBARO Heat Controller is designed for easy, tool-free installation.

1. Identify Valve Type: Determine if your radiator valve is M30 x 1.5, Danfoss RTD-N, or Danfoss RA-N. Select the appropriate adapter if necessary.
2. Бар термостатты алып салуу: Unscrew and remove any existing thermostat head from your radiator valve.
3. Адаптерди туташтырыңыз (зарыл болсо): If your valve is not M30 x 1.5, attach the correct adapter to the valve.
4. Mount Heat Controller: Screw the FIBARO Heat Controller onto the radiator valve or adapter. Ensure it is hand-tightened securely.
5. Калибрлөө: The device will automatically begin a calibration process after installation. This may involve the valve opening and closing to learn its range.

Image 5.1: The FIBARO Heat Controller installed on a radiator in a residential setting.

5.3. Z-Wave тармагынын кошулушу

To integrate the Heat Controller into your Z-Wave network:

1. Place the Heat Controller within direct range of your Z-Wave controller.
2. Set your Z-Wave controller into inclusion (add) mode. Refer to your Z-Wave controller's manual for specific instructions.
3. Press the button on the Heat Controller three times quickly.
4. The device will be detected and added to your Z-Wave network. The LED ring may indicate successful inclusion.

6. Иштөө нускамалары

6.1. Manual Temperature Adjustment

You can manually adjust the desired temperature by rotating the outer ring of the Heat Controller. The LED ring will change color to indicate the set temperature:

• Көк: Lower temperatures
• Жашыл: Орто температура
• Кызыл: Higher temperatures
• Кызгылт көк: Boost/Maximum heating

6.2. Z-Wave Control and Automation

Once included in your Z-Wave network, the FIBARO Heat Controller can be controlled remotely via your Z-Wave gateway's interface or mobile application. This allows for:

• Setting precise temperature schedules.
• Creating scenes and automations (e.g., turn off heating when a window is open).
• Monitoring current room temperature (if an external sensor is paired).
• Voice control integration with compatible smart assistants (e.g., Google Assistant).

Image 6.1: Remote control of the heating system via a smartphone application.

Сүрөт 6.2: Мисample of the FIBARO smart home application interface for managing devices and settings.

7. Техникалык тейлөө

7.1. Батареяны кубаттоо

The built-in battery should be recharged when the low battery indicator appears (usually a flashing LED). Connect the device to a micro-USB power source. A full charge typically takes several hours.

7.2. Тазалоо

Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface.

8. Кыйынчылыктарды

8.1. Түзмөк жооп бербей жатат

• Батареяны текшерүү: Ensure the battery is charged. Connect to a micro-USB charger.
• Z-Wave Network: Verify the device is properly included in your Z-Wave network and within range of the controller.
• Кайра калибрлөө: If the valve movement seems incorrect, try re-calibrating the device by detaching and reattaching it, or through your Z-Wave controller's interface if supported.

8.2. Incorrect Temperature Readings

• The Heat Controller measures temperature near the radiator, which can be warmer than the room's ambient temperature. Consider pairing with an external FIBARO temperature sensor for more accurate room temperature readings.
• Ensure the device is not obstructed or exposed to direct heat sources (e.g., direct sunlight, other appliances).

8.3. Difficulty with Z-Wave Inclusion/Exclusion

• Ensure the device is close to the Z-Wave controller during the inclusion/exclusion process.
• Perform a factory reset on the Heat Controller if it fails to include or exclude. Refer to the FIBARO support website for specific reset procedures.

9. Техникалык шарттар

10. Кепилдик жана колдоо

FIBARO products are covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official FIBARO webсайт.

For technical support, troubleshooting assistance, or further information, please visit the FIBARO support portal or contact their customer service.

• ФИБАРО Webсайт: www.fibaro.com
• Колдоо: расмий колдоо бөлүмүн карагыла website for FAQs, guides, and contact information.