1. Киришүү
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Antari FT-200 Fog Machine. Please read this manual thoroughly before operating the unit and retain it for future reference.
2. Коопсуздук маалыматы
Маанилүү коопсуздук чаралары:
- Ар дайым түзмөктү жерге туташтырылган розеткага туташтырыңыз.
- Use only Antari-approved fog fluid. Other fluids may cause damage or hazardous conditions.
- Аспапты сууга же башка суюктуктарга батырбаңыз.
- Ensure adequate ventilation around the machine. Do not block ventilation openings.
- Балдар жетпеген жерде сактаңыз.
- Электр шнурунун бузулушуна жол бербеңиз.
- Allow the machine to cool down completely before cleaning or servicing.
- Do not point the fog output directly at people or animals.
3. Пакеттин мазмуну
Таңгакта бардык буюмдар бар экенин текшериңиз:
- Antari FT-200 Fog Machine
- Электр кабели
- Колдонуучунун Колдонмосу (бул документ)
4. Орнотуу
Follow these steps to set up your Antari FT-200 Fog Machine:
- Жайгашкан жери: Place the fog machine on a flat, stable, and heat-resistant surface. Ensure there is sufficient space around the unit for proper ventilation.
- Суюктук сактагыч: Open the fluid reservoir compartment.
- Суюктукту толтуруу: Carefully fill the fluid reservoir with Antari-approved fog fluid. Do not overfill. Close the reservoir compartment securely.
- Кубат туташуу: Connect the power cord to the machine's power inlet and then to a grounded electrical outlet.
Image: The Antari FT-200 Fog Machine with its side panel open, revealing the internal fluid container. This shows how to access the reservoir for filling.
5. Иштөө
Operating the Antari FT-200 Fog Machine involves understanding its controls and proper usage.
Сүрөт: алдыңкы бурч view of the Antari FT-200 Fog Machine, highlighting its control panel. Visible elements include the display screen, two rotary knobs labeled 'TIMER' and 'VOLUME', and various input ports.
- Күйгүзүү: Turn the main power switch to the 'ON' position. The machine will begin its warm-up cycle. The display will indicate when the machine is ready for operation.
- Башкаруу каражаттары:
- TIMER Knob: Adjusts the interval between fog bursts when in timer mode.
- VOLUME баскычы: Controls the output volume of the fog.
- ON/OFF которуу: Manually triggers fog output.
- DMX башкаруу: The FT-200 can be controlled via DMX. Refer to the DMX section for detailed instructions on DMX addressing and channel functions.
- Туман чыгаруу: Once warmed up, use the controls to initiate fog production.
- Муздатуу: After use, turn off the machine and allow it to cool down completely before moving or storing.
6. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your FT-200 Fog Machine.
- Тазалоо: Periodically clean the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Fluid System Flush: To prevent clogs, it is recommended to run a fog machine cleaning solution through the system every 30-40 hours of operation, or if the machine will be stored for an extended period.
- Сактагыч: Store the machine in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the fluid reservoir is either empty or securely sealed.
7. Кыйынчылыктарды
If you encounter issues with your Antari FT-200, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Туман чыкпайт | No power; No fluid; Clogged nozzle; Insufficient warm-up time | Check power connection; Fill fluid reservoir; Clean nozzle; Allow full warm-up |
| Туман чыгаруу начар | Low fluid level; Partially clogged nozzle; Incorrect fluid type | Refill fluid; Clean nozzle; Use Antari-approved fluid |
| Machine not warming up | Power issue; Internal fault | Check power; Contact customer support |
If the problem persists after attempting these solutions, please contact Antari customer support.
8. Техникалык шарттар
Technical specifications for the Antari FT-200 Fog Machine:
- Элемент Салмагы: 35.2 фунт
- ASIN: B07658PWTR
- Биринчи жеткиликтүү болгон күнү: 4-октябрь, 2017-жыл
- Өзгөчөлүктөрү: IP-rated fog machine, 40,000 cfm output
9. Кепилдик жана колдоо
Antari products are designed for reliability and performance. For warranty information and technical support, please refer to the official Antari webсайтка же ыйгарым укуктуу дилериңизге кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
