1. Киришүү
This manual provides essential instructions for the proper installation, operation, and maintenance of the TRUE FOOD SERVICE EQUIPMENT 930202 LCD-5S-1TM Blue LED Display. This display unit is designed for integration into commercial food service equipment, providing clear visual feedback and control capabilities. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
2. Продукт бүтүп калдыview
The 930202 LCD-5S-1TM is a compact digital display and control interface. It features a blue LED segment display for numerical values and various indicator icons for operational status. Control is facilitated through a series of tactile buttons.
Сүрөт 1: Фронт view of the TRUE FOOD SERVICE EQUIPMENT 930202 LCD-5S-1TM Blue LED Display. The display shows '888' and includes buttons for 'i' (information), up/down arrows, 'M' (mode), 'X' (exit), and a power button. Various icons such as a bell, snowflake, fan, and degree symbol are also visible.
3. Орнотуу жана орнотуу
3.1 Коопсуздук чаралары
- Ensure power is disconnected from the main equipment before beginning installation.
- Орнотуу квалификациялуу кызматкерлер тарабынан гана аткарылышы керек.
- Refer to the main equipment's wiring diagram for correct electrical connections.
3.2 Монтаждоо
The display unit is designed for panel mounting. Ensure the cutout dimensions in the equipment panel match the display's specifications. Secure the display using the provided mounting clips or screws, ensuring a snug fit to prevent vibration.
3.3 Электр байланыштары
Connect the display unit to the main control board of the equipment according to the wiring diagram provided with your TRUE FOOD SERVICE EQUIPMENT unit. Pay close attention to power supply, sensor inputs, and control outputs. Incorrect wiring can damage the display or the main equipment.
3.4 Баштапкы кубаттуулук
After installation and wiring are complete, restore power to the main equipment. The display should illuminate and show an initial reading or a startup sequence. If the display does not power on, immediately disconnect power and re-check all connections.
4. Иштөө нускамалары
4.1 Дисплейдин көрсөткүчтөрү
- Сандык дисплей: Shows current temperature, setpoint, or parameter values.
- Коңгуроо сүрөтчөсү: Indicates an active alarm condition.
- Snowflake Icon: Illuminates when the refrigeration cycle is active or during defrost.
- Күйөрман сүрөтчөсү: Indicates the evaporator fan is running.
- Degree Symbol (°): Indicates the unit of temperature (e.g., °F or °C).
4.2 Баскыч функциялары
- Кубат баскычы (⏻): Press to turn the display/unit ON or OFF.
- 'i' Button (Information): чейин басыңыз view current status, sensor readings, or access information menus.
- Up Arrow (▲): Used to increase values, scroll up through menus, or initiate manual defrost (if configured).
- Down Arrow (▼): Used to decrease values or scroll down through menus.
- 'M' Button (Mode/Menu): Press to enter the main menu, confirm selections, or save changes.
- 'X' Button (Exit/Cancel): Press to exit a menu, cancel an operation, or clear an alarm.
4.3 Adjusting Setpoint Temperature
- Press the 'M' button once to enter the setpoint adjustment mode. The current setpoint will flash.
- Use the Up (▲) or Down (▼) arrows to adjust the temperature to the desired value.
- Press the 'M' button again to confirm and save the new setpoint. The display will return to showing the current temperature.
5. Техникалык тейлөө
5.1 Тазалоо
To clean the display, gently wipe the surface with a soft, damp кездеме. Абразивдүү тазалоочу каражаттарды, эриткичтерди же ашыкча нымдуулукту колдонбоңуз, анткени алар дисплейге же ички компоненттерге зыян келтириши мүмкүн.
5.2 Текшерүү
Periodically inspect the display for any signs of damage, loose connections, or unusual behavior. If any issues are observed, refer to the troubleshooting section or contact qualified service personnel.
6. Кыйынчылыктарды
- Дисплей бош: Check power supply to the main equipment and the display unit. Verify all electrical connections are secure.
- Температураны туура эмес окуу: Ensure the temperature sensor is properly connected and positioned. Check for obstructions around the sensor.
- Alarm Icon Active: Press the 'X' button to acknowledge and clear the alarm. If the alarm persists, identify the cause (e.g., high temperature, sensor error) and rectify it. Refer to the main equipment's manual for specific alarm codes.
- Баскычтар жооп бербейт: Disconnect power to the unit for a few minutes, then reconnect. If the issue persists, the display unit may require replacement.
For issues not covered in this section, or if problems persist, contact TRUE FOOD SERVICE EQUIPMENT customer support or a certified service technician.
7. Техникалык шарттар
- Модель номери: 930202 (LCD-5S-1TM)
- Дисплей түрү: Blue LED Segment Display
- Өндүрүүчү: TRUE FOOD SERVICE EQUIPMENT
- Элемент Салмагы: Болжол менен 0.01 унция (0.28 грамм)
- Биринчи жеткиликтүү: 1-сентябрь, 2018-жыл
8. Кепилдик жана колдоо
For warranty information, please refer to the documentation provided with your complete TRUE FOOD SERVICE EQUIPMENT unit or contact TRUE customer service directly. For technical support or service inquiries, please visit the official TRUE webсайтына же алардын ыйгарым укуктуу тейлөө борборлоруна кайрылыңыз.
