Monoprice Monolith 4-Tier Audio Stand Instruction Manual

1. Киришүү

The Monoprice Monolith 4-Tier Audio Stand is designed to organize and display your home theater or entertainment system components. It features a sturdy, modular design with open-air shelving to ensure proper ventilation for your equipment.

This manual provides detailed instructions for the assembly, safe operation, and maintenance of your audio stand.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in property damage or personal injury.

• Салмак чеги: Each shelf can support up to 75 lbs (34 kg). The total weight capacity for the entire stand is 300 lbs (136 kg). Do not exceed these limits.
• Коопсуз компоненттер: Always ensure all audio/video components are securely placed on the shelves to prevent them from falling.
• Деңгээл беттик: Assemble and place the stand on a stable, level surface to prevent tipping.
• Балдар жана үй жаныбарлары: Keep children and pets away from the stand during assembly. Do not allow them to climb on or play with the stand.
• Вентиляция: The open-air design promotes airflow. Do not block ventilation openings of your electronic components.

3. Пакеттин мазмуну

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Monoprice customer support.

• MDF Shelves (4x)
• Steel Support Tubes (various lengths for modular assembly)
• Feet/Spikes (4x)
• Монтаждоо жабдуулары (бурамалар, шайбалар ж.б.)

Figure 1: Fully assembled Monoprice Monolith 4-Tier Audio Stand.

4. Монтаждоо боюнча нускамалар

Assembly is straightforward and typically requires no special tools. A rubber mallet may be helpful for seating the threaded caps for the feet.

1. Базаны даярдоо:
   • Place one MDF shelf (this will be the bottom shelf) upside down on a soft, clean surface to prevent scratches.
   • Attach the four feet/spikes to the designated holes on the bottom shelf. Ensure they are securely tightened. If using carpet spikes, insert the threaded caps into the bottom of each foot first. A rubber mallet can assist in seating these caps.
2. Attach Support Tubes:
   • Screw the first set of steel support tubes into the top side of the bottom shelf. Ensure they are hand-tightened securely. Note that one set of tubes may be longer to accommodate taller components on a specific tier. Plan your desired configuration.
3. Add Subsequent Shelves:
   • Carefully place the next MDF shelf onto the top of the attached support tubes, aligning the holes.
   • Screw the next set of support tubes into the top of this shelf.
   • Repeat this process for the remaining shelves and support tubes until all four tiers are assembled.
4. Акыркы бекемдөө жана тегиздөө:
   • Once all shelves and tubes are in place, gently tighten all connections to ensure stability. Do not overtighten.
   • Place the assembled stand in its desired location. Use the adjustable feet/spikes to level the stand. It is recommended to level the front two legs first, then a third leg, and finally the fourth for optimal balance.

Сүрөт 2: Алдыңкы view of the assembled stand, showing shelf and tube arrangement.

5. Иштөө нускамалары

The Monolith Audio Stand is designed for straightforward use with your audio and video components.

• Компоненттин жайгашуусу: Carefully place your audio/video components onto the shelves. Distribute weight evenly across each shelf.
• Кабелдик башкаруу: The open-air design and curved rear edges of the shelves facilitate cable routing. Organize cables neatly to prevent tangles and ensure proper airflow.
• Вентиляция: Ensure that the ventilation openings of your electronic devices are not obstructed by other components or cables. The stand's design promotes natural convection cooling.

3-сүрөт: жогорудан ылдыйга view of a shelf, highlighting the curved design for cable access.

6. Техникалык тейлөө

To maintain the appearance and longevity of your audio stand, follow these simple care instructions:

• Тазалоо: Wipe the shelves and steel tubes with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Текшерүү: Мезгил-мезгили менен бардык байланыштарды текшерип, алар бекем жана коопсуз бойдон калууда.
• Нымдуулуктан качыңыз: Стендди ашыкча нымдуулукка же түз күн нуруна узак убакытка калтырбаңыз.

7. Кыйынчылыктарды

If you encounter issues with your Monolith Audio Stand, consider the following:

• Туруктуу термелүүлөр:
  • Ensure the stand is placed on a completely level surface.
  • Adjust the individual feet/spikes to achieve perfect balance.
  • Verify that all support tubes are securely tightened to the shelves.
• Текчелердеги чийиктердин пайда болушу:
  • The shelves are designed to be scratch-resistant, but not scratch-proof. Avoid dragging heavy or sharp objects across the surface.
  • Use felt pads under components if concerned about potential scratching.
• Ашыкча ысытуу компоненттери:
  • Ensure adequate space around components for airflow.
  • Verify that no cables are blocking the ventilation grilles of your devices.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, technical support, or to inquire about replacement parts, please contact Monoprice customer service directly. Refer to your purchase documentation or the official Monoprice webбайланыш маалыматы үчүн сайт.

Моноприя Webсайт: www.monoprice.com