Kia Mobility KIT-TIRE (52933-2Y000 модели) үчүн колдонмо

Introduction

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Kia Mobility KIT-TIRE (Model 52933-2Y000) tire compressor. Please read this manual thoroughly before using the product and retain it for future reference. Always refer to your vehicle's owner's manual for specific tire pressure recommendations and emergency procedures.

Маанилүү коопсуздук маалыматы

• Do not use for sidewall punctures: This device is designed for temporary repair of tread punctures only. It is not suitable for punctures on the tire sidewall or for significant tire damage.
• Ашыкча ысып кетүүдөн сактаныңыз: Continuous operation can cause the compressor to overheat. Allow the unit to cool down if it becomes excessively hot during use.
• Туура томtage: Ensure the compressor is connected to a 12-volt DC power source, typically your vehicle's accessory outlet.
• Балдар жана үй жаныбарлары: Keep the compressor and its components away from children and pets.
• Көздү коргоо: Компрессорду иштетип жатканда тиешелүү коргоочу көз айнек тагыныңыз.
• Vehicle stability: Ensure your vehicle is parked on a level surface with the parking brake engaged before attempting any tire inflation.
• Шина басымы: Always inflate tires to the pressure specified in your vehicle's owner's manual or on the tire placard. Over-inflation can be dangerous.

For detailed visual instructions, refer to the diagram below:

Сүрөт 1: Алдыңкы view of the Kia Mobility KIT-TIRE compressor, illustrating connection points, power switch, and operational steps.

Жайгашуу

1. Prepare the vehicle: Унааңызды тегиз, туруктуу жерге токтотуңуз. Кол тормозун басып, кыймылдаткычты өчүрүңүз.
2. Locate the compressor: Remove the Kia Mobility KIT-TIRE compressor from its storage location.
3. Connect to tire valve: Unscrew the valve cap from the tire. Firmly screw the compressor's air hose connector onto the tire valve stem until secure.
4. Кубатка туташуу: Insert the compressor's power plug into your vehicle's 12V accessory outlet (cigarette lighter socket). Ensure the vehicle's ignition is in the "ACC" or "ON" position, or the engine is running, as required by your vehicle.

Иштөө нускамалары

1. Баштапкы басымды текшерүү: Before turning on the compressor, observe the current tire pressure reading on the integrated gauge.
2. Инфляциянын башталышы: Flip the power switch on the compressor to the "ON" position. The compressor will begin to inflate the tire.
3. Монитор басымы: Continuously monitor the pressure gauge. Inflate the tire to the recommended pressure (e.g., 2.0-2.8 bar / 30-40 psi, or as specified in your vehicle's manual).
4. Инфляцияны токтотуу: Once the desired pressure is reached, immediately switch the compressor to the "OFF" position.
5. Ажыратуу: Unscrew the air hose connector from the tire valve and replace the valve cap. Disconnect the power plug from the vehicle's 12V outlet.
6. Post-Inflation Driving (for temporary sealant use): If using the compressor with tire sealant for a temporary repair, drive the vehicle immediately for a short distance (e.g., 10 km / 6 miles) at a moderate speed (e.g., 20-80 km/h or 15-50 mph) to allow the sealant to distribute evenly.
7. Re-check Pressure: After driving, re-check the tire pressure. If the pressure has dropped significantly, the repair may not be effective, and professional assistance is required.

Техникалык тейлөө

• Тазалоо: Wipe the exterior of the compressor with a damp cloth. Do not use harsh chemicals or immerse the unit in water.
• Сактагыч: Store the compressor in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the hose and power cord are neatly coiled to prevent damage.
• Текшерүү: Periodically inspect the air hose, power cord, and connectors for any signs of wear, cracks, or damage. Do not use the unit if any components are damaged.

Проблемаларды чечүү

• Компрессор күйбөйт:
  • Ensure the power plug is fully inserted into the 12V outlet.
  • Check the vehicle's 12V outlet fuse.
  • Verify the vehicle's ignition is in the correct position (ACC or ON).
• Инфляциянын жайлашы же жоктугу:
  • Ensure the air hose connector is securely attached to the tire valve.
  • Check for leaks in the air hose or connections.
  • Verify the tire valve stem is not damaged.
  • If the tire has a large puncture or sidewall damage, the compressor may not be able to inflate it.
• Компрессордун ысып кетиши:
  • Allow the unit to cool down for at least 10-15 minutes before resuming operation.
  • Avoid continuous operation for extended periods.
• Туура эмес басым көрсөткүчү:
  • Ensure the compressor is on a stable surface.
  • Эгерде бар болсо, көрсөткүчтү белгилүү так дөңгөлөк басымын өлчөгүч менен салыштырып көрүңүз.

Техникалык шарттар

For additional technical details, refer to the product label shown below:

Сүрөт 2: Артка view of the Kia Mobility KIT-TIRE compressor, showing model, power, and manufacturing details.

Кепилдик маалымат

Specific warranty details for the Kia Mobility KIT-TIRE (Model 52933-2Y000) are not provided in this manual. Please refer to the warranty documentation included with your purchase or contact your authorized Kia dealer or the product seller for comprehensive warranty information.

Кардарларды колдоо

For technical assistance, service, or inquiries regarding your Kia Mobility KIT-TIRE, please contact your authorized Kia service center or the retailer from whom you purchased the product. Provide your model number (52933-2Y000) when seeking support to ensure accurate assistance.