Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the SkyTech 9800337 Smart Batt II/III Fireplace Remote Control System. This system is designed to offer safe, reliable, and user-friendly control for gas heating appliances.
The system operates using radio frequencies (RF) within a 20-foot range, utilizing non-directional signals. Each system is pre-programmed at the factory with one of 1,048,567 unique security codes. It is essential to match the remote receiver's code to that of the transmitter before initial use.
Продукт бүттүview
Image: The SkyTech 9800337 Smart Batt II/III Fireplace Remote. The remote is black with an LCD display at the top and control buttons below. A small flip cover on the lower left side is open, revealing text instructions for manual and thermostatic operation.
The SkyTech 9800337 system includes both a battery-operated transmitter (remote) and a receiver. Key features include:
- All battery-operated receiver and transmitter for flexible placement.
- A protective flip cover for the 4-button controls, preventing accidental presses.
- LCD display showing room temperature in either Fahrenheit (°F) or Celsius (°C).
- Equipped with 1,048,576 security codes to prevent interference.
- Programmable thermostat setting for automated temperature control.
- Includes all necessary Skytech batteries and a wall holder for convenient storage.
- Features a 9-hour countdown timer and a 24-hour clock.
- Flame icon and low battery indicator on the LCD for easy monitoring.
Жайгашуу
1. Батареяны орнотуу
The system requires 6 AA batteries, which are included. Install batteries into both the transmitter and the receiver according to the polarity markings. Ensure the battery compartment covers are securely closed.
2. Кабыл алуучуну жайгаштыруу
Place the receiver near your gas heating appliance, ensuring it is within the 20-foot operating range of the transmitter. Avoid placing the receiver in direct contact with hot surfaces or in areas with excessive moisture.
3. Code Matching (Pairing)
Before first use, the remote receiver's code must be matched to the transmitter. Refer to the specific instructions provided with your product for the exact pairing procedure, which typically involves pressing a learn button on the receiver and then a button on the transmitter within a short timeframe.
Иштөө нускамалары
The SkyTech 9800337 remote offers both manual and thermostatic operation modes.
Кол менен иштетүү
To operate the fireplace manually:
- басыңыз РЕЖИМ button on the transmitter until "ON" or "OFF" is displayed for manual control.
- Use the appropriate buttons (e.g., ON/OFF, UP/DOWN) to turn the fireplace on or off.
Термостатикалык иштөө
To use the programmable thermostat feature:
- басыңыз РЕЖИМ button until "THERMO" is displayed on the LCD.
- Adjust the desired SET temperature using the UP or DOWN buttons.
- The system will automatically turn the fireplace on or off to maintain the set temperature.
Timer and Clock Functions
The remote features a 9-hour countdown timer and a 24-hour clock. Consult the detailed instructions provided with your product for setting these functions.
Техникалык тейлөө
Батареяны алмаштыруу
When the low battery indicator appears on the LCD, replace all batteries in both the transmitter and receiver promptly. Use only fresh AA alkaline batteries. Dispose of old batteries responsibly.
Тазалоо
Clean the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.
Сактагыч
If the system will not be used for an extended period, remove the batteries from both the transmitter and receiver to prevent leakage and damage.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Алыстан жооп бербей жатат | Low batteries; Receiver out of range; Unmatched security codes. | Replace batteries; Move closer to receiver; Re-match security codes. |
| Ыйгарымсыз операция | Interference from other RF devices; Weak signal. | Ensure no strong RF sources nearby; Check battery strength. |
| LCD display is blank or dim | Өлгөн же аз батареялар. | Батареяларды алмаштырыңыз. |
If troubleshooting steps do not resolve the issue, please contact SkyTech customer support.
Техникалык шарттар
- Модель номери: 9800337
- Продукциянын өлчөмдөрү: 7 x 4 x 4 дюйм
- Салмагы: Approximately 0.01 ounces (excluding packaging)
- Кубат булагы: 6 AA батарейка (кошулган)
- Түсү: Кара
- Өзгөчө өзгөчөлүгү: Программалануучу термостат
- Колдоого алынган түзмөктөрдүн максималдуу саны: 1
- Шайкеш түзмөктөр: Fire Pit, Fireplace (specifically Heat-N-Glo Battery Receive systems)
- RF диапазону: 20 футка чейин (багытсыз)
- Коопсуздук коддору: 1 048 567 уникалдуу код
Кепилдик жана колдоо
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official SkyTech webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
Өндүрүүчү: Skytech
