USARemote Key Fob Keyless Entry Remote Instruction Manual

1. Киришүү жана шайкештик

This manual provides instructions for the USARemote Key Fob Keyless Entry Remote, model c-oht-4btn. This product is a replacement key fob designed for specific Chrysler, Dodge, and Jeep vehicles. It includes a complete electronic assembly with a pre-installed battery.

Шайкеш келген унаалар:

• Chrysler: 200, 300, 300c, PT Cruiser, Sebring
• Dodge: Avenger, Charger
• Jeep: Commander, Grand Cherokee, Liberty

This remote is a replacement for Part Numbers (P/N): OHT692427AA жана KOBDT4A.

2. Setup and Programming Instructions

The USARemote key fob is user-programmable under specific conditions. Please follow these steps carefully. Important: Two original, working keys are required for self-programming. If you possess only one working key, programming must be performed by a qualified locksmith or dealership.

Self-Programming Steps (Requires Two Original Keys):

1. Insert the first original, working key into the ignition and turn it to the "ON" position for at least 3 seconds, but no longer than 15 seconds. Then, turn the key to "OFF" and remove it.
2. Within 15 seconds, insert the second original, working key into the ignition and turn it to the "ON" position. The vehicle's security light should illuminate and then turn off, indicating the system is in programming mode. Turn the key to "OFF" and remove it.
3. Within 60 seconds, insert the new USARemote key fob into the ignition and turn it to the "ON" position. The vehicle's security light should illuminate and then turn off, confirming successful programming. Turn the key to "OFF" and remove it.
4. Test all functions of the new key fob (lock, unlock, panic, etc.) to ensure proper operation.

If self-programming is unsuccessful or if you only have one original key, professional programming by a locksmith or dealership is necessary.

Сүрөт: алдыңкы view of two blue USARemote key fobs. Each fob features four buttons: Lock, Unlock, a car icon with 'x2' (typically for remote start or trunk release), and a red Panic button.

3. Иштөө нускамалары

The USARemote key fob provides convenient access and control for your vehicle. Familiarize yourself with the button functions:

• Кулпу баскычы (): Press once to lock all vehicle doors. The vehicle lights may flash, and the horn may chirp to confirm.
• Кулпуну ачуу баскычы (): Press once to unlock the driver's door. Press twice within five seconds to unlock all vehicle doors.
• Remote Start / Trunk Release Button (): This button typically activates remote start or opens the trunk/liftgate, depending on your vehicle's features. Consult your vehicle's owner's manual for specific functionality.
• Panic Button (Red "PANIC" button): Press and hold for approximately 3 seconds to activate the vehicle's alarm system (horn and lights). Press any button on the fob or insert the key into the ignition to deactivate the alarm.

Сүрөт: Артка view of two blue USARemote key fobs, showing the smooth, unbuttoned reverse side of the units.

4. Техникалык тейлөө

Your USARemote key fob is designed for durability. To ensure its longevity and proper function, consider the following maintenance tips:

• Батарея: The key fob comes with a pre-installed battery. When the battery eventually depletes, replacement can typically be done by carefully opening the fob casing and inserting a new battery of the specified type (refer to your vehicle's original manual or a professional for battery type).
• Коргоо: Avoid exposing the key fob to excessive moisture, extreme temperatures, or direct sunlight for prolonged periods.
• Тазалоо: Clean the exterior of the fob with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

5. Кыйынчылыктарды

If you encounter issues with your USARemote key fob, try the following troubleshooting steps:

• Remote Not Programming: Ensure you have two original, working keys if attempting self-programming. Verify that the vehicle's battery is fully charged. If issues persist, professional programming by a locksmith or dealership is recommended.
• Remote Not Working After Programming: Check the key fob battery. If the battery is low, replace it. Ensure the key fob is within range of the vehicle.
• Кыскартылган диапазон: A weak battery can cause reduced operating range. Replace the battery if necessary. Environmental factors or interference can also affect range.
• Баскычтар жооп бербейт: If individual buttons are not responding, the internal contacts might be dirty or worn. This may require professional inspection or replacement of the fob.

6. Техникалык шарттар

7. Кепилдик жана колдоо

USARemote offers a hassle-free return policy for items that do not function as expected. For returns or support inquiries, please refer to your purchase platform's order section. For additional information about USARemote products, you may visit the official USARemote Store.