VANGUARD VGUBG-0979SS Stainless Steel Classic Sport Bar

Introduction

This manual provides comprehensive instructions for the proper installation, maintenance, and troubleshooting of the VANGUARD VGUBG-0979SS Stainless Steel Classic Sport Bar. This product is specifically designed for compatibility with 2007-2022 Ford Edge models, excluding Titanium trims. Please read all instructions carefully before beginning installation to ensure safety and proper fitment.

Түз фронт view of a white Ford Edge, showcasing the VANGUARD Classic Sport Bar securely mounted to the vehicle's front bumper area. The polished stainless steel finish of the bar complements the vehicle's design.

Коопсуздук маалыматы

• Орнотуу учурунда ар дайым коопсуздук көз айнеги жана кол кап сыяктуу тиешелүү жеке коргонуу каражаттарын кийиңиз.
• Жумушка киришерден мурун, унаа тегиз жерге токтотулганын жана кол тормозу иштетилгенин текшериңиз.
• Эгерде унааны көтөрүп жатсаңыз, аны бекитүү үчүн тиешелүү домкрат таянычтарын колдонуңуз. Эч качан домкрат гана тиреп турган унаанын астында иштебеңиз.
• Keep all fasteners and small parts away from children.
• Эгерде сиз орнотуу процессинин кайсы бир кадамы боюнча күмөн санасаңыз, квалификациялуу адиске кайрылыңыз.

Бөлүктөр тизмеси

Verify that all components listed below are present and undamaged before proceeding with installation. All assembly and mounting hardware is included.

This image displays the VANGUARD VGUBG-0979SS Stainless Steel Classic Sport Bar. The main view shows the polished stainless steel bull bar itself, while a circular inset on the top left illustrates the bar installed on the front of a white Ford Edge.

Керектүү куралдар

• Розетка ачкычтарынын топтому
• Комбинацияланган ачкычтар
• Өлчөө лентасы
• Маркер же карандаш
• Utility Knife or Trim Tool (for undercarriage cover trimming)
• Коопсуздук көз айнек
• Колкаптар

Орнотуу & Орнотуу

The VANGUARD Classic Sport Bar features a bolt-on installation. Trimming of the undercarriage cover is required for most vehicles for proper fitment.

1. Унааны даярдоо:
   • Park the vehicle on a flat, stable surface and engage the parking brake.
   • Locate the factory mounting points on the vehicle's frame or bumper support. These are typically pre-drilled holes.
   • Carefully remove any plastic undercarriage covers or splash guards that obstruct access to the mounting points. Note that trimming of these covers will be necessary for reinstallation.
2. Монтаждоо кронштейндерин орнотуу:
   • Attach the left and right mounting brackets to the vehicle's frame using the provided hardware. Do not fully tighten the bolts at this stage; allow for some adjustment.
   • Ensure the brackets are oriented correctly, typically with the flat mounting surface facing forward.
   

   This close-up image provides a detailed view of the VANGUARD Classic Sport Bar from a low angle, emphasizing its integration with the Ford Edge's front end. It helps visualize the clearance and how the bar sits relative to the vehicle's undercarriage.
3. Attach Sport Bar Assembly:
   • With assistance, carefully lift the Classic Sport Bar assembly and align its mounting points with the holes on the installed brackets.
   • Secure the sport bar to the brackets using the remaining hardware. Again, do not fully tighten the bolts yet.
4. Тууралоо жана бекемдөө:
   • Adjust the position of the sport bar and brackets to ensure it is centered and level on the vehicle.
   • Once satisfied with the alignment, progressively tighten all bolts, starting from the vehicle frame connections and then the sport bar connections. Ensure all fasteners are securely torqued according to general automotive standards.
5. Reinstall Undercarriage Covers:
   • Carefully trim the removed undercarriage covers or splash guards as necessary to accommodate the installed sport bar and brackets.
   • Reinstall the trimmed covers using their original fasteners.
6. Акыркы текшерүү:
   • Double-check all bolted connections to ensure they are tight and secure.
   • Confirm that the sport bar does not interfere with any vehicle components (e.g., headlights, sensors, license plate).

Колдонуу маселелери

• The Classic Sport Bar is designed for aesthetic enhancement and light-duty protection. It is not intended for heavy-duty off-road recovery or significant impact absorption.
• Regularly inspect all mounting hardware for tightness, especially after off-road driving or significant vibrations.
• Ensure the sport bar does not obstruct the vehicle's license plate or any required lighting.

Техникалык тейлөө

To maintain the polished chrome finish of your VANGUARD Stainless Steel Classic Sport Bar, follow these guidelines:

• үзгүлтүксүз тазалоо: Wash the sport bar regularly with mild automotive soap and water. Use a soft cloth or sponge to avoid scratching the surface.
• Кургатуу: Dry the bar immediately after washing to prevent water spots, especially in hard water areas.
• Жылтыратуу: For a brilliant shine, use a non-abrasive stainless steel polish periodically. Follow the polish manufacturer's instructions.
• Катуу химиялык заттардан алыс болуңуз: Do not use abrasive cleaners, steel wool, or harsh chemicals (e.g., strong acids or alkalis) as these can damage the finish.
• Salt Exposure: If exposed to road salt or marine environments, clean the bar more frequently to prevent corrosion.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For information regarding product warranty, returns, or technical support, please contact VANGUARD directly through their official webсайт же кардарларды тейлөө каналдары. Сатып алуунун далили катары сатып алуу дүмүрчөгүңүздү сактап коюңуз.

Өндүрүүчү: Vanguard Off-Road

Webсайт: www.vanguardoffroad.com (Эскертүү: Бул жалпы эксample; please refer to the actual manufacturer's website for precise contact information.)