ECOVACS OZMO 601 робот швабра жана чаң соргуч колдонуучунун колдонмосу

Introduction

The ECOVACS OZMO 601 is a self-charging robotic cleaner designed to vacuum and mop various floor types, including carpets and hard floors. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance and longevity.

Image: The ECOVACS OZMO 601 Robot Mop and Vacuum, shown with its accompanying smartphone application for remote control.

Пакеттин мазмуну

Орнотууну баштоодон мурун, бардык компоненттердин бар экендигин текшериңиз:

• ECOVACS OZMO 601 Robot Mop & Vacuum
• Заряддоо док
• Кубаттуу адаптер
• Каптал щеткалары (2 жуп)
• Негизги щетка
• Чаң урнасы
• Water Tank with Mopping Pad
• High Efficiency Filter (with sponge)
• Тазалоо куралы
• Instruction Manual

Жайгашуу

1. Пакеттен чыгаруу: Carefully remove all packaging materials and protective films from the robot and its accessories.
2. Каптал щеткаларды орнотуу: Каптал щеткаларды роботтун астыңкы жагындагы мамыларга алар ордуна чыкылдаганча басыңыз.
3. Заряддоочу жай: Position the charging dock against a wall in an open area, ensuring there are no obstacles within 1 meter (3.3 feet) to the sides and 2 meters (6.6 feet) in front. Connect the power adapter to the dock and plug it into a wall outlet.
4. Баштапкы төлөм: Place the robot onto the charging dock. Ensure the charging pins on the robot align with those on the dock. The indicator light on the robot will show charging status. Allow for a full charge before first use (approximately 4-5 hours).
5. ECOVACS HOME тиркемесин жүктөп алыңыз: For smart control features, download the "ECOVACS HOME" app from your smartphone's app store. Follow the in-app instructions to connect your OZMO 601 to your home Wi-Fi network.

Image: The ECOVACS HOME app on a smartphone, illustrating its various control and monitoring functions for the robot cleaner.

Иштөө нускамалары

Тазалоо циклин баштоо

• Авто режим: Press the Auto Mode button on the robot or in the app. The robot will automatically clean in a systematic pattern.
• Spot режими: For concentrated cleaning of a small area, place the robot near the area and select Spot Mode via the app.
• Edge режими: To clean along walls and furniture, select Edge Mode via the app.

Vacuuming Function

The OZMO 601 is equipped with a main brush and side brushes to effectively sweep and vacuum dirt, dust, and pet hair from various floor surfaces. Ensure the dust bin is properly installed before vacuuming.

Image: The underside of the ECOVACS OZMO 601, highlighting its main brush, side brushes, and the attached mopping pad for dual cleaning functionality.

Mopping Function (OZMO Mopping)

For mopping, fill the water tank with clean water and attach the mopping pad. Insert the water tank assembly into the robot. The OZMO 601 will then vacuum and mop simultaneously on hard floors. Remove the water tank and mopping pad when cleaning carpets.

Image: The ECOVACS OZMO 601 actively mopping a hard floor, demonstrating its water tank and cleaning action.

Navigation and Sensors

The robot uses intelligent navigation to cover your floors efficiently. It is equipped with:

• Тоскоолдуктарды аныктоо: Sensors help the robot detect and avoid obstacles, preventing collisions with furniture and walls.
• Тамчыга каршы сенсорлор: These sensors prevent the robot from falling down stairs or off ledges.

Image: The ECOVACS OZMO 601 illustrating its obstacle detection capabilities, navigating around furniture.

Image: The ECOVACS OZMO 601 demonstrating its anti-drop sensors, preventing it from falling down a staircase.

Техникалык тейлөө

Regular maintenance is crucial for the optimal performance of your ECOVACS OZMO 601. Perform these steps regularly:

• Бош чаң урнасы: Empty the dust bin after each cleaning cycle.
• Таза чыпкалар: Tap the high-efficiency filter to remove dust. Replace filters every 3-6 months, or as needed.
• Негизги щетканы тазалоо: Use the cleaning tool to remove hair and debris from the main brush. Replace every 6-12 months.
• Таза каптал щеткалар: Remove tangled hair and debris from the side brushes. Replace every 3-6 months.
• Clean Water Tank and Mopping Pad: After mopping, empty any remaining water from the tank and wash the mopping pad. Allow to air dry.
• Таза сенсорлор: Wipe the anti-drop sensors and obstacle detection sensors with a dry cloth to ensure proper function.

Проблемаларды чечүү

If you encounter issues with your ECOVACS OZMO 601, refer to the following common solutions:

• Робот заряддалбай жатат: Ensure the charging dock is powered on and the robot is correctly aligned with the charging pins. Clean the charging contacts on both the robot and the dock.
• Робот бат-баттан тыгылып калат: Clear obstacles, loose cables, and thick rugs from the cleaning path. The robot may struggle with high thresholds or floor patterns that confuse its sensors.
• Начар тазалоо көрсөткүчтөрү: Empty the dust bin, clean or replace filters, and remove tangled hair from brushes. Ensure the water tank is filled for mopping.
• Колдонмо туташуу көйгөйлөрү: Ensure your robot is within Wi-Fi range and your router is functioning correctly. Try restarting both the robot and your Wi-Fi router. If issues persist, a full reset of the unit and re-pairing with the app may be necessary.
• Robot not returning to charging base: Ensure the charging dock is accessible and not blocked. The robot may have run out of battery far from the dock if cleaning a very large area.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик маалыматы, техникалык колдоо же тейлөө суроосу үчүн расмий ECOVACSке кайрылыңыз webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

You can visit the official ECOVACS Store for more information: Amazonдагы ECOVACS дүкөнү.