1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of your TOPGREENER TDOS5-JD Dual Load Motion Sensor Switch. This device is designed to automatically control two separate loads, such as lights and a fan, based on occupancy or vacancy detection using Passive Infrared (PIR) technology. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Коопсуздук маалыматы
- ЭСКЕРТҮҮ: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that the power is off before wiring.
- Installation must be performed by a qualified electrician or in accordance with all local and national electrical codes.
- This device requires a жер зымы туура иштеши үчүн.
- Бул аппарат кылат not require a neutral wire.
- Бул аппаратты анын белгиленген көрсөткүчтөрүнөн ашкан жүктөр менен колдонбоңуз.
- Үй ичинде гана колдонуу үчүн.
3. Пакеттин мазмуну
- TOPGREENER TDOS5-JD Dual Load Motion Sensor Switch
- Instruction Manual
- Монтаждоо бурамалар
- Wire Nuts
4. Продукциянын өзгөчөлүктөрү
- Dual Load Control: Connect and automate two separate loads (e.g., lights and a fan) from a single unit.
- PIR Кыймыл сенсору: Detects motion with a 180° field of view, covering up to 40ft in front and 20ft on either side. Advanced PIR technology helps reduce false triggers.
- Walk-Through Feature: Automatically turns off loads after 2.5 minutes if no further motion is detected within 30 seconds of the initial trigger.
- Бир нече иштөө режимдери:
- Occupancy Sensor Mode (OCCS): Loads turn ON automatically when motion is detected and OFF after a set time delay when the area is vacant.
- Dual Occupancy Mode (OCCD): Both loads operate in occupancy mode.
- Vacancy Sensor Mode (VACD): Loads are turned ON manually and turn OFF automatically after a set time delay when the area is vacant.
- Убакыттын жөнгө салынышы: Configurable options for 15 seconds (Test mode), 5 minutes, 10 minutes, 20 minutes, and 30 minutes.
- Нейтралдуу зым талап кылынбайт: Simplifies installation in older homes or locations without a neutral wire.
- Ground Wire Required: Essential for safe operation.
- Электр рейтингдери: 120/277VAC@60Hz; 800W incandescent/halogen, 150W LED/CFL, 1/4HP motor.
- Шайкештик: Compliant with Title 20 & Title 24.
- Single-Pole Only: Бир уюлдуу колдонмолор үчүн иштелип чыккан.
5. Орнотуу
Баштоодон мурун: Ensure power is OFF at the circuit breaker. This device is for single-pole installations only and requires a ground wire.
- Кубатты өчүрүү: Алмаштырып жаткан өчүргүчтү башкарган автоматтык өчүргүчтү таап, аны ӨЧҮРҮҢҮЗ. Үн күчөткүчтү колдонуп, кубат өчүк экенин текшериңиз.tage сыноочу.
- Учурдагы которгучту алып салуу: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires.
- Зымдарды аныктоо: You should have a Line (hot) wire, two Load wires (one for each load, e.g., light and fan), and a Ground wire. This switch does not require a neutral wire.
- Сенсорду которгучка зым кошуу: Connect the wires from the wall box to the corresponding wires on the TDOS5-JD switch using wire nuts.
- туташтыруу Line (hot) wire from the wall box to the switch's Line wire.
- туташтыруу Load 1 wire (e.g., for lights) from the wall box to the switch's Load 1 wire.
- туташтыруу Load 2 wire (e.g., for fan) from the wall box to the switch's Load 2 wire.
- туташтыруу Жер зымы from the wall box to the switch's Ground wire.
- Которгучту орнотуу: Carefully fold the wires into the wall box and secure the switch with the provided screws. Attach the wall plate.
- Күчтү калыбына келтирүү: Электрди өчүргүчтөн кайра күйгүзүңүз.
- Warm-Up Period: After installation, allow 1-2 minutes for the device to warm up and calibrate before it functions correctly.
1-сүрөт: Components of the TDOS5-JD sensor switch, indicating the PIR sensor, Load 1/2 ON/OFF buttons, LED indicator, and a note about the warm-up period after installation. It also highlights that a ground wire is required and no neutral wire is needed.
2-сүрөт: An image showing the TOPGREENER TDOS5-JD motion sensor switch being carefully inserted into a standard electrical wall box during the installation process.
6. Операция
Once installed and powered, the TDOS5-JD switch will operate according to the selected mode (Occupancy or Vacancy) and configured settings.
- Автоматтык башкаруу: In Occupancy modes, the sensor detects motion and automatically turns on the connected loads. After the area becomes vacant for the set time delay, the loads will turn off. In Vacancy mode, loads are turned on manually and turn off automatically.
- Кол менен күйгүзүү/өчүрүү: The switch features two ON/OFF buttons, one for each load, allowing for manual control. Pressing an ON/OFF button will toggle the respective load.
- LED көрсөткүчү: A small LED indicator provides visual feedback on the switch's status.
3-сүрөт: A person carrying a laundry basket walks into a room, and the lights automatically turn on, illustrating the hands-free lighting capability of the motion sensor switch.
4-сүрөт: A modern bathroom setting where the TOPGREENER dual load sensor switch controls both the overhead lights and the exhaust fan automatically, demonstrating its energy-saving potential.
7. Ыңгайлаштыруу жана жөндөөлөр
The TDOS5-JD switch offers adjustable settings for time delay, sensitivity (range), and operating mode. These settings are located behind the faceplate.
- Кирүү Орнотуулары: Gently pry open the outer cover of the switch to reveal the adjustment dials and mode switch.
- Убакытты кечиктирүүнү тууралоо: Use a small screwdriver to turn the 'TIME' dial to select the desired delay: Test (15 seconds), 5 minutes, 10 minutes, 20 minutes, or 30 minutes.
- Adjust Sensor Range: Use a small screwdriver to turn the 'RANGE' dial to adjust the motion detection sensitivity from 1 (lowest) to 4 (highest).
- Иштөө режимин тандоо: Use the small switch labeled 'OCCD OCCS VACD' to choose your desired mode:
- OCCD: Dual Occupancy Mode
- OCCS: Single Occupancy Mode
- VACD: Вакансия режими
5-сүрөт: A detailed diagram illustrating the steps to customize the sensor switch settings. It shows how to open the cover, and then adjust the 'Time' dial (Test, 5, 10, 20, 30 Min), 'Range' dial (1-4), and the 'Mode Select' switch (OCCD, OCCS, VACD).
6-сүрөт: An image depicting a modern bathroom with the sensor switch installed on the wall. A magnified inset shows the adjustable time delay and range dials, emphasizing the customization options for automatic light control.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Lights/Fan do not turn ON with motion. | No power; incorrect wiring; sensor blocked; incorrect mode; range too low. | Check circuit breaker. Verify wiring connections. Ensure sensor lens is clear. Confirm correct operating mode (OCCS/OCCD). Increase sensor range. |
| Lights/Fan stay ON too long or turn OFF too quickly. | Incorrect time delay setting; continuous motion detected; walk-through feature activated. | Adjust time delay setting. Ensure no constant motion within sensor's view. Understand walk-through feature behavior. |
| Lights/Fan turn ON without apparent motion (false triggers). | Sensor too sensitive; heat sources or air drafts; sensor facing high-traffic area. | Decrease sensor range. Relocate sensor away from heat sources (HVAC vents, direct sunlight) or drafts. Adjust sensor direction if possible. |
| Timer not functioning as expected (e.g., only extreme settings work). | Dial mechanism issue; specific unit calibration. | Carefully re-adjust the time dial. If issue persists, contact customer support. |
| One load works, but the other does not. | Incorrect wiring for the non-working load; faulty bulb/fan. | Verify wiring connections for Load 1 and Load 2. Test the bulb or fan directly to ensure it is functional. |
9. Техникалык шарттар
- Модель номери: TDOS5-JD
- Өлчөмдөрү: 2.5 x 2.5 x 4.5 дюйм
- Салмагы: 6 унция
- Кубат булагы: Электр зымдары
- Тtage: 120/277VAC, 60Гц
- Incandescent/Halogen Load: 800W макс
- LED/CFL Load: 150W макс
- Мотор рейтинги: 1/4HP max
- Камтуу аймагы: 1200 чарчы футка чейин
- талаасы View: 180 градус
- Максималдуу диапазон: 40 feet (in front), 20 feet (sides)
- Иштөө температурасы: 32-131°F (0-55°C)
- Зымдар: Ground wire required, no neutral wire required
- Сертификаттар: UL Listed, Compliant with Title 20 & Title 24
10. Техникалык тейлөө
The TOPGREENER TDOS5-JD motion sensor switch requires minimal maintenance.
- Тазалоо: Periodically wipe the sensor lens and faceplate with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or sensor.
- Текшерүү: Occasionally check the switch for any visible damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them or consult a qualified electrician.
11. Кепилдик жана колдоо
TOPGREENER products are designed for reliability and performance. For specific warranty information, including terms and conditions, please refer to the warranty documentation provided with your purchase or visit the official TOPGREENER website. For technical support or assistance with troubleshooting, please contact TOPGREENER customer service.
Өндүрүүчү: TOPGREENER
Байланыш маалыматы: Please visit the TOPGREENER official webэң акыркы байланыш маалыматтары жана колдоо ресурстары үчүн сайт.
