1. Продукт бүтүп калдыview
The ELRO ADS1F Dummy Alarm Siren is designed to deter potential intruders by mimicking the appearance and function of a real alarm siren. It serves as a preventive measure without requiring an extensive security system. This dummy siren features a red LED lamp that flashes to simulate an active alarm, enhancing its deterrent effect, especially at night.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Simple, cost-effective, and sustainable theft and vandalism prevention.
- Realistic appearance of an active alarm siren.
- Quick and straightforward installation.

Сүрөт 1: Алдыңкы view of the ELRO ADS1F Dummy Alarm Siren, showing the main unit and the red flashing LED section at the bottom.
2. Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:
- 1x ELRO ADS1F Dummy Alarm Siren unit
- Fixing material (screws and wall plugs)
- 3x 1.5V AA батарейкалары
- 1x Security sticker
- 1x Колдонмо колдонмо (бул документ)

Figure 2: The ELRO ADS1F Dummy Alarm Siren with its front cover open, revealing the internal battery compartment designed for three AA batteries.
3. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | ADS1F |
| Өлчөмдөрү (L x W x Y) | 280 мм x 200 мм x 95 мм (болжол менен 28 x 20 x 9.5 см) |
| Салмагы | 654 грамм |
| Power Source | 3x 1.5V AA Batteries (included) |
| Монтаж түрү | Дубалга орнотуу |
| Камтылган компоненттер | Dummy siren, 3x AA batteries, instructions, security sticker, mounting material |

Figure 3: Diagram showing the dimensions of the ELRO ADS1F Dummy Alarm Siren: 275mm height, 195mm width, and 95mm depth.
4. Орнотуу жана орнотуу
The ELRO ADS1F Dummy Alarm Siren is designed for quick and easy installation. Follow these steps to mount the unit:
- Жайгашкан жерди тандаңыз: Select a visible location on the exterior of your home or property, preferably at a height that makes it difficult to reach but easy to see. Ensure the location is suitable for wall mounting.
- Батареяларды салыңыз: Open the front cover of the dummy siren. Insert the three 1.5V AA batteries into the designated battery compartment. Ensure correct polarity. Close the cover securely.
- Бургулоо пункттарын белгилөө: Hold the dummy siren against the chosen wall location. Use a pencil to mark the positions for the mounting screws through the pre-drilled holes on the back plate of the unit.
- Бургулоо тешиктери: Using an appropriate drill bit for your wall type, drill holes at the marked positions. Insert the provided wall plugs into the drilled holes.
- Mount the Siren: Align the dummy siren with the drilled holes and secure it to the wall using the provided screws. Tighten the screws until the unit is firmly attached to the wall.
- Apply Security Sticker: Place the included security sticker in a prominent location, such as a window or door, to further enhance the deterrent effect.

Figure 4: The ELRO ADS1F Dummy Alarm Siren shown in its retail packaging alongside an installed unit on a building exterior, illustrating the product and its typical placement.

Figure 5: The ELRO ADS1F Dummy Alarm Siren installed on the exterior brick wall of a building, demonstrating its intended placement for visibility.
5. Иштөө нускамалары
The ELRO ADS1F Dummy Alarm Siren operates automatically once batteries are installed. Its primary function is to provide a visual deterrent:
- Жаркылдаган LED: The integrated red LED light will begin to flash periodically once the batteries are correctly inserted. This flashing light simulates the activity of a live alarm system, making the dummy siren appear functional and active, especially during nighttime hours.
- Үзгүлтүксүз иштөө: The device is designed for continuous operation as long as the batteries provide power. There are no on/off switches or complex controls.
No further user interaction is required for its operation beyond initial battery installation and mounting.
6. Техникалык тейлөө
The ELRO ADS1F Dummy Alarm Siren requires minimal maintenance to ensure its continued effectiveness:
- Батареяны алмаштыруу: The flashing LED light will dim or cease operation when the batteries are low. Replace all three AA batteries with new ones when this occurs to maintain the deterrent effect.
- Тазалоо: Мезгил-мезгили менен аппараттын сыртын жумшак, гamp чаңды, кирди же сөңгөктү кетирүү үчүн кездемеwebs. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
- Текшерүү: Occasionally inspect the mounting screws to ensure the unit remains securely attached to the wall. Check for any visible damage to the casing.
Ensure the battery compartment is always sealed to protect against moisture and environmental elements.
7. Кыйынчылыктарды
If you encounter issues with your ELRO ADS1F Dummy Alarm Siren, consider the following:
- LED күйүп-өчпөй жатат:
- Check if the batteries are inserted correctly, observing polarity (+/-).
- Replace the batteries with new 1.5V AA batteries.
- Ensure the battery compartment cover is fully closed.
- Unit Feels Loose on Wall:
- Carefully re-tighten the mounting screws.
- If the wall plugs are loose, consider using larger wall plugs or relocating the unit slightly.
- Көрүнгөн зыян:
- If the unit is physically damaged, its effectiveness as a deterrent may be compromised. Consider replacement.
For issues not resolved by these steps, please refer to the support section.
8. Кепилдик маалыматы
ELRO provides a 2 жылдык кепилдик on the ADS1F Dummy Alarm Siren. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or improper installation.
Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official ELRO webсайтка же кардарларды колдоо менен байланышыңыз.
9. Колдоо жана байланыш
For further assistance, technical support, or inquiries regarding your ELRO ADS1F Dummy Alarm Siren, please contact ELRO customer service. Refer to the ELRO official website for the most up-to-date contact information, including phone numbers, email addresses, and support hours.
When contacting support, please have your product model number (ADS1F) and details of your issue readily available to facilitate a quicker resolution.

Figure 6: Icons representing the user manual and customer support, indicating resources available for product information and assistance.





