Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass AET200-1 Vintage Tub Faucet Body. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Keep this manual for future reference.
Коопсуздук маалыматы
- Орнотуу же оңдоо иштерин баштоодон мурун ар дайым негизги суу менен камсыздоону өчүрүңүз.
- Орнотуу учурунда коопсуздук көз айнеги жана кол кап сыяктуу тиешелүү жеке коргонуу каражаттарын (ЖКК) кийиңиз.
- Орнотуу процессинин кандайдыр бир бөлүгүнө ишенбесеңиз, квалификациялуу сантехникке кайрылыңыз.
- Суу агып кетпеши үчүн бардык туташуулардын коопсуз жана суу өткөрбөгөндүгүн текшериңиз.
- Do not use harsh chemicals or abrasive cleaners on the faucet finish.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- Kingston Brass AET200-1 Faucet Body
- Монтаждоочу жабдык
- (Additional components may vary based on specific model variations)
1-сүрөт: Kingston Brass AET200-1 Vintage Tub Faucet Body. This image displays the polished chrome faucet body with its gooseneck spout and two handle connections.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Кингстон Брасс |
| Модель номери | AET200-1 |
| Материал | Катуу жез курулуш |
| Бүтүрүү | Жылтыратылган Chrome |
| Монтаж түрү | Wall Mount 2-Hole Installation |
| Туткалардын саны | 2 (Handles sold separately) |
| Spout Reach | 4-1/2 дюйм |
| сүйлөйсүз Бийиктиги | 9-7/16 дюйм |
| Максималдуу агым ылдамдыгы | 80 PSIде 7.0 GPM / 26.5 LPM |
| Inlet Connection | 3/4"-14 NPS |
| Картридждин түрү | Тамчылатпаган керамикалык диск |
| Продукциянын өлчөмдөрү | 9.44 x 8.75 x 4.5 дюйм |
| Элемент Салмагы | 4.02 фунт |
2-сүрөт: Detailed technical drawing of the AET200-1 faucet body, showing key dimensions including spout reach (4-1/2"), spout height (9-7/16"), and wall mount spacing (3-3/8").
Орнотуу
This faucet is designed for wall-mount, 2-hole installation. Professional installation is recommended.
- Орнотуу аймагын даярдоо: Turn off the main water supply to the bathroom. Clear the area around the tub where the faucet will be installed.
- Verify Wall Openings: Ensure your wall has two pre-drilled holes spaced 3-3/8 inches apart, suitable for the faucet's inlet connections.
- Жип герметикти колдонуу: Apply plumber's tape or thread sealant to the threaded inlet connections of the faucet body.
- Insert Faucet Body: Carefully insert the faucet body into the wall openings, ensuring the spout is oriented correctly.
- Коопсуз орнотуу жабдыктары: From behind the wall (if accessible) or using the provided mounting hardware, secure the faucet body firmly to the wall. Tighten nuts evenly to prevent stress on the connections.
- Суу линияларын туташтыруу: Connect the hot and cold water supply lines to the corresponding inlet connections on the faucet body. Ensure connections are tight but do not overtighten.
- Install Handles (Sold Separately): Attach the desired handles (not included with faucet body) according to their specific instructions.
- Агышуу үчүн сыноо: Slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, turn off the water supply and re-tighten connections as necessary.
- Системаны жуу: Allow water to run through the faucet for a few minutes to flush out any debris from the new installation.
Операция
The Kingston Brass AET200-1 faucet body is designed for use with two separate handles (hot and cold), which control water flow and temperature.
- Күйгүзүү/өчүрүү: Rotate the hot and cold handles to turn the water flow on or off.
- Температураны жөндөө: Mix hot and cold water by adjusting both handles until the desired water temperature is achieved.
- Агымды жөндөө: The flow rate can be adjusted by how much the handles are opened.
Техникалык тейлөө
Proper care and maintenance will ensure the longevity and appearance of your faucet.
- Тазалоо: Clean the faucet regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots.
- Катуу тазалагычтардан качыңыз: Do not use abrasive cleaners, harsh chemicals, ammonia-based products, or scouring pads, as these can damage the polished chrome finish.
- Керамикалык диск картридж: The faucet features a drip-free ceramic disc cartridge, which typically requires no maintenance. If a drip occurs, it may indicate a need for cartridge replacement.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Water leaks from spout when off. | Эскирген керамикалык диск картриджи. | Керамикалык диск картриджин алмаштырыңыз. |
| Water leaks from base of faucet. | Loose connections or damaged O-rings/gaskets. | Turn off water supply, check and tighten connections. Inspect and replace O-rings/gaskets if damaged. |
| Суунун аз агымы. | Partially closed shut-off valves, clogged aerator (if applicable), or debris in water lines. | Ensure shut-off valves are fully open. Clean or replace aerator. Flush water lines. |
Кепилдик маалымат
This Kingston Brass product comes with a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official Kingston Brass website or contact their customer support. Proof of purchase may be required for warranty claims.
Кардарларды колдоо
For further assistance, technical support, or replacement parts, please contact Kingston Brass customer service:
- Webсайт: www.kingstonbrass.com
- Телефон: Refer to the Kingston Brass webучурдагы байланыш номерлери үчүн сайт.
