eufy BoostIQ RoboVac 11S (Slim) робот чаң соргуч колдонуучунун колдонмосу

Introduction

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your eufy BoostIQ RoboVac 11S (Slim) robot vacuum cleaner. Please read this manual thoroughly before using your RoboVac and retain it for future reference.

Маанилүү коопсуздук нускамалары

Always follow basic precautions, including:

• Шайманды колдонуудан мурун бардык нускамаларды окуп чыгыңыз.
• Do not operate the RoboVac in areas with open flames or flammable materials.
• Чачты, кенен кийимдерди, манжаларды жана дененин бардык бөлүктөрүн тешиктерден жана кыймылдуу бөлүктөрдөн алыс кармаңыз.
• Бул колдонмодо сүрөттөлгөндөй гана колдонуңуз.
• Чаң урнасы жана/же чыпкалары жок колдонбоңуз.
• Балдарга шайман менен ойноого уруксат бербеңиз.
• Only use the power adapter supplied by the manufacturer.
• Do not use the appliance to pick up large debris, liquids, or sharp objects.

Пакеттин мазмуну

• 1 x eufy BoostIQ RoboVac 11S (Slim)
• 1 x Remote control (AAA batteries included)
• 1 x Charging Base & Power Adapter
• 1 x тазалоо куралы
• 2 x Side Brushes (additional pair)
• 1 x Filter Set (additional set)
• 1 x User Manual
• 1 x Quick Start Guide
• 1 x Кепилдик маалыматы

Жайгашуу

1. Prepare the RoboVac

• RoboVac жана кубаттоочу түтүктөн бардык коргоочу пленкаларды жана стикерлерди алып салыңыз.
• Attach the side brushes by pressing them onto the square posts until they click.

2. Install the Charging Base

Place the charging base on a hard, level surface against a wall. Ensure there is at least 3 feet (1 meter) of clear space to either side and 6 feet (2 meters) in front of the charging base. Connect the power adapter to the charging base and a wall outlet. The indicator light on the charging base will illuminate.

Image: RoboVac automatically returning to its charging base.

3. Баштапкы төлөм

Place the RoboVac onto the charging base, ensuring the charging pins align. For first-time use, charge the RoboVac for at least 12 hours. The indicator light on the RoboVac will breathe orange while charging and turn solid blue when fully charged.

Operating Your RoboVac

1. Күйгүзүү/өчүрүү

Press and hold the power button on the RoboVac for 3 seconds to turn it on or off. The indicator light will turn blue when on.

2. Тазалоо режимдери

The RoboVac offers several cleaning modes, selectable via the remote control:

• Автоматтык тазалоо: The RoboVac cleans automatically using various cleaning patterns. This is the default mode.
• Тазалоо: For concentrated cleaning of a specific area. The RoboVac will clean in a spiral pattern for approximately 2 minutes.
• Четтерин тазалоо: RoboVac дубалдарды жана эмеректердин четтерин тазалайт.
• Бир бөлмөнү тазалоо: The RoboVac cleans a single room and then returns to its charging base.

Image: Remote control for selecting cleaning modes and scheduling.

3. BoostIQ технологиясы

The RoboVac automatically increases suction power when extra vacuuming strength is needed, such as when transitioning from hard floors to carpets. This feature activates in approximately 1.5 seconds.

Image: RoboVac activating BoostIQ for increased suction on carpet.

4. Пландаштыруу

Use the remote control to set a cleaning schedule for your RoboVac. Refer to the remote control section in the full manual for detailed instructions on setting schedules.

Техникалык тейлөө

RoboVac машинаңыздын үзгүлтүксүз техникалык тейлөөсү анын оптималдуу иштешин камсыз кылат.

1. Чаң урнасын бошотуу

Empty the dust bin after each use. Press the dust bin release button and pull out the bin. Open the dust bin cover and discard debris.

Image: The dust bin removed from the RoboVac, showing collected debris.

2. Фильтрлерди тазалоо

Remove the filters from the dust bin. Tap them to remove dust and rinse them under running water. Allow filters to air dry completely before reinstalling. Replace filters every 3-6 months, or as needed.

Image: Diagram illustrating the multi-layer filter system of the RoboVac.

3. Cleaning the Rolling Brush and Side Brushes

Remove the rolling brush cover and lift out the rolling brush. Use the cleaning tool to remove hair and debris. Clean the side brushes by pulling them off and removing any tangled hair or debris. Replace worn side brushes.

4. Сенсорлорду жана заряддоо контакттарын тазалоо

Wipe the drop sensors, charging contacts, and swivel wheel with a dry cloth to maintain proper function.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

Your eufy BoostIQ RoboVac 11S (Slim) comes with a 12 айлык кепилдик. For technical support, warranty claims, or additional information, please refer to the warranty information card included in your package or visit the official eufy support webсайт.