1. Киришүү
This manual provides comprehensive instructions for the setup, operation, and maintenance of your BFT B RCB TX4 Remote Control. Please read this manual carefully before using the device to ensure proper functionality and longevity.
2. Продукт бүтүп калдыview
The BFT B RCB TX4 is an ergonomic radio frequency remote control designed for various compatible devices, including televisions, DVD/Blu-ray players, set-top boxes, and audio/video receivers. It features 12 buttons and operates with a range of up to 150 meters.
1-сүрөт: Фронт view of the BFT B RCB TX4 Remote Control, showing its four main buttons and the BFT logo.
3. Орнотуу жана программалоо
The BFT B RCB TX4 remote control is designed for easy programming. The specific programming method may vary depending on the receiver unit it is being paired with. Below is a general programming procedure. Refer to your receiver's manual for precise instructions if these steps do not apply.
- Prepare the Receiver: Locate the programming button or learn mode activation on your compatible device (e.g., gate opener, garage door opener, or other receiver). This button is often labeled "PROG," "LEARN," or "SET."
- Үйрөнүү режимин иштетүү: Press and hold the programming button on your receiver until an indicator light (LED) illuminates or flashes, signifying that the receiver is in learn mode.
- Пультту программалоо: While the receiver is in learn mode, press and hold the desired button on your BFT B RCB TX4 remote control that you wish to assign to the function. Hold the button for approximately 2-3 seconds.
- Программалоону ырастоо: The indicator light on the receiver should change (e.g., flash rapidly, turn solid, or turn off) to confirm successful programming. Release the button on the remote control.
- Сыноо функциясы: Press the programmed button on your BFT B RCB TX4 remote control to test its operation with the receiver.
- Program Additional Buttons (if applicable): Repeat steps 2-5 for any other buttons you wish to program for different functions or devices.
Эскертүү: If programming fails, ensure the remote control has fresh batteries and that you are within the operational range of the receiver. Some receivers may require a specific sequence or a master remote for programming.
4. Иштөө нускамалары
Once programmed, operating the BFT B RCB TX4 remote control is straightforward:
- Баскыч функциялары: Each of the 12 buttons on the remote control corresponds to a specific function or device as programmed during the setup process.
- Жандандыруу: To activate a function, simply press the corresponding button firmly and release it.
- Диапазон: The remote control has an operational range of up to 150 meters in open areas. Obstructions such as walls, vehicles, or adverse weather conditions may reduce this range.
- Индикатор жарыгы: Some remote controls may feature a small LED indicator that illuminates when a button is pressed, confirming signal transmission.
5. Техникалык тейлөө
5.1 Батареяны алмаштыруу
The BFT B RCB TX4 remote control uses an alkaline battery, which is included with the device. When the remote's range decreases significantly or it stops responding, it is likely time to replace the battery.
- Батарея бөлүмүн табыңыз: The battery compartment is typically located on the back or side of the remote control. It may be secured with a small screw or a clip.
- Ачык бөлүм: Use a small screwdriver or a coin to gently open the battery compartment cover.
- Эски батареяны алып салуу: Carefully remove the old battery, noting its orientation (+/- terminals).
- Жаңы батареяны салыңыз: Insert a new alkaline battery of the same type, ensuring correct polarity.
- Жабуу бөлүм: Батарея уясынын капкагын ордуна коюп, аны бекитиңиз.
- Сыноо: Test the remote control's functionality after replacing the battery.
5.2 Тазалоо
To clean the remote control, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Пульт жооп бербей жатат. | Батарея түгөнүп калган же аз заряддалган. Туура эмес программалоо. Аралыктан иштөө мүмкүнчүлүгүнөн тышкары. | Replace battery. Re-program the remote. Move closer to the receiver. |
| Кыскартылган иштөө диапазону. | Батареянын заряды аз. Тоскоолдуктар. Тоскоолдуктар. | Replace battery. Ensure clear line of sight. Check for sources of radio interference. |
| Remote programs but does not operate. | Incorrect programming. Receiver issue. | Verify programming steps with receiver manual. Check receiver's power and status. |
7. Техникалык шарттар
- Модел: TX4
- Бренд: BFT (Manufacturer: Remote)
- Материал: Пластик
- Баскычтардын саны: 12
- Байланыш технологиясы: Радио жыштыгы
- Иштөө диапазону: 150 метрге чейин (ачык аянт)
- Батарея түрү: щелочтуу (кошулган)
- Өзгөчөлүктөр: Эргономикалык дизайн
- Шайкеш түзмөктөр: Television, DVD/Blu-ray Player, Set Top Box, Audio/Video Receiver (requires compatible receiver unit)
8. Кепилдик жана колдоо
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.
Manufacturer: Remote
