1. Киришүү
The PROEL V10PLUS is a high-performance, bi-amplified 2-way monitor speaker designed for professional audio applications. It integrates a powerful 600W Class D + AB amplifier with Switch-Mode Power Supply (SMPS) technology, ensuring efficient and clear sound reproduction. Its lightweight, reinforced polypropylene cabinet and ergonomic handle provide excellent portability, while its trapezoidal shape allows for versatile use as a stage monitor or for fixed installations.
2. Негизги өзгөчөлүктөрү
- тактапamplified 2-way design: Features a 1-inch neodymium compression driver and a 10-inch woofer with a 2-inch voice coil.
- Күчтүү Ampжашоо: 600W total power (Class D + AB amplifier with SMPS).
- Integrated Active Processor: Includes a dual LIMITER circuit for undistorted sound even at high levels.
- Ар тараптуу киргизүүлөр: MIC/LINE input with two-band EQ for flexible audio source connection.
- Статус көрсөткүчтөрү: Front LED for power (ON) and signal/clip indication.
- Жогорку чыгаруу: Maximum SPL of 123dB.
- Кең жыштыктагы жооп: 60Hz - 20kHz.
- Туруктуу жана портативдик дизайн: Ultralight reinforced polypropylene cabinet with a comfortable carry handle.
- Ийкемдүү жайгаштыруу: Trapezoidal shape for use as a stage monitor and four M10 suspension points for installation.
- Компакт жана жеңил: Product dimensions of 25 x 35 x 30 cm and a total weight of 10 kg.
3. Орнотуу
Proper setup ensures optimal performance and longevity of your PROEL V10PLUS speaker. Follow these steps for initial configuration:
3.1 Таңгактан чыгаруу жана текшерүү
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.
3.2 Орнотуу
The V10PLUS is designed for various applications:
- Пол монитор: Position the speaker on the floor using its angled profile с үчүнtage мониторинг.
- Динамик стенд: Utilize the integrated pole mount socket on the bottom of the speaker to mount it on a standard speaker stand.
- Токтотуу: Use the four M10 suspension points for fixed installations. Ensure proper rigging hardware and safety procedures are followed by qualified personnel.
Figure 3.2.1: PROEL V10PLUS in stage monitor position.
3.3 Байланыштар
Refer to the rear panel image for connection points.
3.3.1-сүрөт: Арткы панелдин туташуулары жана башкаруу элементтери.
- Кубат туташуу: Connect the supplied AC power cable to the POWER input on the rear panel and then to a suitable electrical outlet. Ensure the voltage matches the speaker's requirements (220-240V~ 50/60Hz).
- Аудио киргизүү: Connect your audio source (mixer, microphone, instrument) to the INPUT section. The V10PLUS features a combo XLR/TRS input.
- For microphone signals, use the MIC/LINE switch to select 'MIC'.
- For line-level signals (e.g., from a mixer), select 'LINE'.
- Шилтеменин чыгышы: The LINK output (XLR) allows you to send the input signal to another V10PLUS speaker or another audio device.
4. Иштөө нускамалары
Once connected, follow these steps to operate your PROEL V10PLUS speaker:
- Күйгүзүү: Ensure all connections are secure and the LEVEL knob is set to minimum. Flip the POWER switch to the 'ON' position. The front LED will illuminate to indicate power.
- Киргизүүнү тандоо: Set the MIC/LINE switch according to your input source (MIC for microphones, LINE for line-level devices).
- Үндү тууралоо: Slowly increase the LEVEL knob to achieve the desired volume. Monitor the front LED: it should primarily show 'SIGNAL' (green). If it frequently shows 'CLIP' (red), reduce the input level from your source or the speaker's LEVEL knob to prevent distortion.
- Тон көзөмөлү: Use the HIGH and LOW EQ knobs to adjust the treble and bass frequencies to suit your preference or acoustic environment.
- Өчүрүү: Before disconnecting power or cables, turn the LEVEL knob to minimum and then flip the POWER switch to 'OFF'.
5. Техникалык тейлөө
Regular maintenance helps preserve the performance and appearance of your speaker.
- Тазалоо: Use a soft, dry cloth to clean the cabinet. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes.
- Грильди тазалоо: The metal grille can be gently cleaned with a soft brush or vacuum cleaner to remove dust.
- Сактагыч: When not in use for extended periods, store the speaker in a dry, cool place, ideally in its original packaging or a protective cover, away from direct sunlight and extreme temperatures.
- Кабелдик текшерүү: Periodically check all power and audio cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.
Caution: Do not attempt to open the speaker cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
6. Кыйынчылыктарды
This section addresses common issues you might encounter with your PROEL V10PLUS speaker.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Күч жок | Power cable disconnected; Power switch OFF; No power from outlet. | Ensure power cable is securely connected. Turn POWER switch ON. Test outlet with another device. |
| Үн жок | Input cable disconnected/faulty; LEVEL knob at minimum; Incorrect MIC/LINE selection; Source device muted/off. | Check input cable connections. Increase LEVEL knob. Verify MIC/LINE switch setting. Ensure audio source is active and sending signal. |
| Distorted Sound | Input signal too high (clipping); LEVEL knob too high; Faulty cable. | Reduce input gain from source. Reduce speaker's LEVEL knob (if CLIP LED is active). Try a different input cable. |
| Күңүрт/гүрс эткен ызы-чуу | Ground loop; Faulty cable; Interference from other electronics. | Ensure all equipment is on the same electrical circuit. Try different cables. Move speaker away from other electronic devices. |
If the problem persists after trying these solutions, please contact PROEL customer support or an authorized service center.
7. Техникалык шарттар
Detailed technical specifications for the PROEL V10PLUS speaker:
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | V10PLUS |
| Өндүрүүчү | PROEL |
| Динамик түрү | 2 тараптуу Би-amplified Monitor Speaker |
| Максималдуу чыгаруу күчү | 600 Ватт |
| Frequency Response | 60Гц - 20кГц |
| Байланыш технологиясы | Зымдуу |
| Аудио чыгаруу режими | Стерео |
| Продукциянын өлчөмдөрү (L x W x Y) | 25 x 35 x 30 см |
| Элемент Салмагы | 10 килограмм |
| Түс | Кара |
| Материал | Пластик, алюминий |
| Сунушталган колдонмолор | Музыка |
| Шайкеш түзмөктөр | Television, Tablet, Personal computer, Smartphone |
| Айланадагы үн конфигурациясы | 2.0 |
| Суу өткөрбөйт | Жок |
| Монтаж түрү | Wall Mount (also supports suspension via M10 points and floor monitor use) |
| Өзгөчөлүктөр | эки тараптуу экиamplifier 600 W class D + AB with SMPS |
8. Кепилдик жана колдоо
8.1 Кепилдик маалыматы
This PROEL V10PLUS speaker comes with an extended warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official PROEL webсайтка же ыйгарым укуктуу дилериңизге кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
8.2 Кардарларды колдоо
For technical assistance, service, or spare parts, please contact PROEL customer support. You can find contact information and additional resources, including FAQs and product documentation, on the official PROEL webсайт (www.proel.com). Please have your product model number (V10PLUS) and serial number ready when contacting support.
