Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Sennheiser ew 500 G4-935-GW+ Wireless Vocal Set. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Продукт бүттүview
The Sennheiser ew 500 G4-935-GW+ is a professional-grade wireless vocal set designed for high-quality audio transmission. It includes a handheld microphone with an e 935 capsule and a rackmount receiver, offering robust performance for various applications.
Figure 1: Sennheiser ew 500 G4-935-GW+ Wireless Vocal Set, featuring the handheld microphone and the EM 300-500 G4 rackmount receiver.
Компоненттер (кутуда эмне бар)
- (1) SKM 500 G4 Handheld Microphone
- (1) e 935 Capsule (cardioid, dynamic)
- (1) EM 300-500 G4 Rackmount Receiver
- (1) GA3 Rack Kit
- (1) Микрофон клипсасы
- Power Supply (for receiver)
- 2 AA Batteries (for microphone)
Жайгашуу
1. Receiver Setup (EM 300-500 G4)
- Жайгашкан жери: Position the EM 300-500 G4 receiver in a suitable location, ideally within line of sight of the microphone and away from potential sources of interference. The GA3 rack kit can be used for rack mounting.
- Кубат туташуу: Connect the provided power supply to the receiver's DC input and plug it into a power outlet.
- Аудио чыгаруу: Connect the receiver's audio output (XLR or 1/4" jack) to your mixing console or audio system.
- Антенналар: Ensure the receiver's antennas are properly connected and positioned for optimal signal reception.
2. Microphone Setup (SKM 500 G4 with e 935 capsule)
- Батарея орнотуу: Unscrew the lower part of the microphone handle to access the battery compartment. Insert 2 AA batteries, observing correct polarity.
- Күйгүзүү: Press and hold the power button on the microphone until the display illuminates.
- Синхрондоштуруу: Use the "Sync" function on both the receiver and microphone to establish a wireless connection. Follow the on-screen prompts on the receiver's OLED display.
- Жыштык тандоо: The system offers up to 3520 selectable frequencies within the GW1 (558 - 608 MHz) range. Utilize the receiver's scan function to find the clearest available frequency in your environment to avoid interference.
Иштөө нускамалары
1. Күйгүзүү/өчүрүү
- Алуучу: Алдыңкы панелдеги кубат баскычын басыңыз.
- Микрофон: Press and hold the power button on the microphone until the display turns on/off.
2. Үндү тууралоо
Adjust the audio output level of the receiver using the dedicated controls on the rear panel to match the input requirements of your mixing console.
3. Үнсүз функция
The microphone features a mute function. Refer to the microphone's display and controls for activation and deactivation.
4. Advanced Frequency Coordination
For multi-channel setups, connect the receiver via Ethernet to utilize the Wireless Systems Manager (WSM) control software for advanced frequency coordination.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Микрофон форма фактору | Колдук |
| Жыштык диапазону | GW1 (558 - 608 MHz) |
| өткөрүү жөндөмдүүлүгү | 88 МГц чейин |
| Тандалган жыштыктар | 3520 |
| Simultaneous Channels | 32ге чейин |
| RF чыгаруу күчү | Up to 50 mW (adjustable in three steps: 10/30/50) |
| Ызы-чуунун катышы | 103 дБ |
| Кубат булагы (микрофон) | 2 АА батарейка керек |
| Байланыш технологиясы | Ethernet, зымсыз |
| Туташтыргыч түрү | XLR |
| Материал | Металл |
| Элементтин өлчөмдөрү (L x W x Y) | 15.94 x 13.78 x 2.87 дюйм |
| Элемент Салмагы | 6.7 фунт |
Техникалык тейлөө
- Тазалоо: Use a soft, dry cloth to clean the exterior of the microphone and receiver. Avoid using harsh chemicals or abrasive materials.
- Батареяга кам көрүү: Remove batteries from the microphone if it will not be used for an extended period to prevent leakage.
- Сактагыч: Store the vocal set in a cool, dry place, away from extreme temperatures and humidity.
Проблемаларды чечүү
- Аудио жок:
- Микрофон да, кабыл алгыч да күйүп турганын текшериңиз.
- Check battery levels in the microphone.
- Verify that the microphone and receiver are properly synchronized to the same frequency.
- Confirm audio cables are securely connected from the receiver to the mixing console.
- Тоскоолдуктар/Окуудан чыгып кетүүлөр:
- Perform a frequency scan on the receiver to find a clear channel.
- Ensure line of sight between the microphone and receiver.
- Move away from other wireless devices (Wi-Fi routers, other wireless microphones) that might be operating on similar frequencies.
- Төмөн үнү:
- Adjust the output level control on the receiver.
- Check the input gain settings on your mixing console.
Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please refer to the official Sennheiser webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
зыярат кылыңыз Sennheiser Store көбүрөөк өнүмдөр жана маалымат үчүн.
