Utilitech 110 градустук 1 баштуу коло күн энергиясы менен иштеген интеграцияланган LED кыймыл менен иштетилүүчү таймер колдонуучусунун колдонмосу менен жарыктандыруучу жарык

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 110-Degree 1-Head Bronze Solar Powered Integrated LED Motion-Activated Flood Light with Timer. This solar-powered floodlight is designed for outdoor security lighting, offering a convenient and energy-efficient solution for illuminating areas such as front yards, backyards, gardens, pathways, and porches. It features an advanced amorphous solar panel for green energy utilization, a dusk-to-dawn sensor to prevent daytime illumination, and a selectable timer for 1 or 3 minutes of light duration.

Коопсуздук маалыматы

Бул продуктуну орнотуудан же иштетүүдөн мурун бардык көрсөтмөлөрдү окуп чыгып, түшүнүп алыңыз. Бул көрсөтмөлөрдү аткарбоо электр тогуна урунууга, өрткө же мүлккө зыян келтирүүчү же жеке жаракатка алып келүүчү башка коркунучтарга алып келиши мүмкүн.

• Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal battery charging.
• Do not attempt to disassemble or modify the product. There are no user-serviceable parts inside except for battery replacement.
• Keep the solar panel and light fixture clean from dirt, snow, or debris to maintain charging efficiency and light output.
• Бул продукт сыртта колдонуу үчүн иштелип чыккан жана суу өткөрбөйт. Бирок, аны сууга чөмүлтпөңүз.
• When replacing batteries, use only the specified type and rating (two 1000 mAh 18500 lithium phosphate solar rechargeable batteries).
• Эски батареяларды жергиликтүү эрежелерге ылайык жок кылыңыз.

Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз.

• 1x LED Flood Light Unit with Motion Sensor
• 1x Solar Panel with 20-ft Cord
• Монтаждоочу жабдуулар (буроолор, анкерлер)
• 2x 1000 mAh 18500 Lithium Phosphate Solar Rechargeable Batteries (pre-installed or included separately)

Image: The complete Utilitech solar flood light system, showing the LED light unit with motion sensor, the separate solar panel, and the connecting cord.

Продукт өзгөчөлүктөрү

• Күн энергиясы: Easy installation without electrical wiring.
• Кыймыл иштетилген: 110-degree detection range up to 40 feet.
• Интегралдык LED: Maintenance-free LED technology with 350 lumens brightness and 5000K cool white light.
• Күүгүмдөн таңга чейин сенсор: Automatically prevents illumination during daylight hours.
• Жөнгө салынуучу таймер: Selectable light duration of 1 or 3 minutes.
• Жөнгө салынуучу Лamp башчысы: Allows for precise light direction.
• Кубат булагы: Two 1000 mAh 18500 lithium phosphate solar rechargeable batteries (included).
• Орнотуу: Suitable for wall and eave mount.
• Корндун узундугу: 20-ft cord connecting the solar panel to the light unit.

Орнотуу жана орнотуу

Follow these steps for proper installation of your solar flood light.

1. Choose a Location for the Solar Panel: Select an outdoor location for the solar panel that receives at least 6-8 hours of direct sunlight daily. Avoid areas shaded by trees, buildings, or other obstructions. The 20-ft cord allows flexibility in placing the solar panel away from the light unit for optimal sun exposure.
   

   Сүрөт: Жакын план view of the solar panel with its mounting base and connecting cord.
2. Күн панелин орнотуу: Use the provided mounting hardware to securely attach the solar panel to a wall or eave. Ensure the panel is angled to maximize sun exposure.
3. Choose a Location for the Flood Light: Select a desired location for the flood light unit. This can be a wall or eave. Consider the 110-degree motion detection range and the area you wish to illuminate.
   

   Image: The Utilitech flood light unit, showing the LED light head and the motion sensor at the bottom.

4. Жарыкты орнотуу: Securely attach the flood light unit to the chosen surface using the appropriate mounting hardware.
5. Connect the Solar Panel to the Light Unit: Plug the 20-ft cord from the solar panel into the designated port on the flood light unit. Ensure a secure connection.
   

   Image: An installed Utilitech solar flood light and solar panel on a wall, demonstrating the connection.

6. L тууралооamp Head and Motion Sensor: Loosen the adjustment screws on the lamp head and motion sensor to position them for optimal coverage. Tighten the screws once adjusted.
7. Баштапкы төлөм: Allow the solar panel to charge the batteries for at least 24-48 hours in direct sunlight before initial use to ensure full battery capacity.

Иштөө нускамалары

Your Utilitech solar flood light is designed for automatic operation.

• Автоматтык иштетүү: The integrated dusk-to-dawn sensor will detect ambient light levels. The flood light will only activate when motion is detected during nighttime hours.
• Кыймылды аныктоо: The motion sensor has a 110-degree detection angle and can detect movement up to 40 feet away. Position the sensor to cover the desired area.
• Таймерди орнотуу: Locate the timer switch on the flood light unit. You can select between a 1-minute or 3-minute illumination duration after motion is detected.
• Adjustable Detection Sensitivity: The motion sensor sensitivity can be adjusted. Refer to the markings on the sensor for specific settings (if available on your model).

Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин прожекторуңуздун оптималдуу иштешин жана узак мөөнөттүү иштешин камсыз кылат.

• Тазалоо: Periodically clean the solar panel and the LED light lens with a soft, damp cloth to remove dirt, dust, or debris. A clean solar panel ensures efficient charging.
• Батареяны алмаштыруу: The flood light is powered by two 1000 mAh 18500 lithium phosphate solar rechargeable batteries. If the light output diminishes significantly or the light stops working, the batteries may need replacement. Replacement batteries (Lowe's item # 605119) are sold separately.

  Батареяны алмаштыруу үчүн:

  1. Carefully open the battery compartment on the flood light unit.
  2. Эски батарейкаларды алып чыгып, туура жок кылыңыз.
  3. Insert new 18500 lithium phosphate solar rechargeable batteries, ensuring correct polarity.
  4. Батарея бөлүкчөсүн коопсуз жабыңыз.

• LED технологиясы: The integrated LED technology is maintenance-free and does not require bulb replacement.

Проблемаларды чечүү

If your flood light is not functioning as expected, refer to the following common issues and solutions.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt for warranty claims.

Replacement batteries (Lowe's item # 605119) are available for purchase separately.