Clear-Com BS410 Base Station User Manual

1. Introduction and Overview

The Clear-Com BS410 is a robust base station designed for professional wireless communication systems. It serves as the central hub for the DX410 wireless system, facilitating seamless communication for up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. Operating within the 2.4GHz frequency band, the BS410 delivers high-quality 7kHz wideband audio, ensuring clear and reliable voice transmission. A key feature of this base station is its audio bridging capability, allowing for the integration of both 2-wire and 4-wire audio signals on its A or B channels, providing versatile connectivity options for various production environments.

2. Коопсуздук маалыматы

• Аппаратты иштетүүдөн мурун бардык нускамаларды кылдат окуп чыгыңыз.
• Аппаратты жамгырга, нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
• Ашыкча ысып кетүүнүн алдын алуу үчүн туура желдетүүнү камсыз кылыңыз. Вентиляция тешиктерин жаап албаңыз.
• Өндүрүүчү тарабынан көрсөтүлгөн тиркемелерди/аксессуарларды гана колдонуңуз.
• Бардык тейлөөлөрдү квалификациялуу тейлөө кызматкерлерине тапшырыңыз. Бул продуктуну өзүңүз тейлөөгө аракет кылбаңыз.
• Чагылган бороондордо же көпкө колдонулбаганда электр энергиясын өчүрүңүз.

3. Продукциянын өзгөчөлүктөрү

• Supports up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets.
• Operates in the 2.4GHz frequency band (2400 – 2483.5 MHz).
• Provides high-quality 7kHz wideband audio for clear communication.
• Features audio bridging capability for combining 2-wire and 4-wire audio.
• Designed for professional communication applications.
• Wireless connectivity for flexible deployment.
• Rack-mountable design for integration into existing setups.

4. Орнотуу

Before operating your Clear-Com BS410 Base Station, follow these steps for proper setup:

4.1 Front Panel Overview

4.2 Антеннаны туташтыруу

Locate the antenna connectors on the rear panel of the BS410. Carefully screw the provided antennas onto these connectors. Ensure they are finger-tight to establish a secure connection for optimal wireless performance.

4.3 Кубат туташтыруу

Connect the supplied power cable to the power input on the rear of the BS410 and then to a suitable AC power outlet. Ensure the power switch on the front panel is in the OFF position before connecting power.

4.4 Audio Connections (2-Wire / 4-Wire)

The BS410 supports both 2-wire and 4-wire audio connections. Connect your external audio equipment (e.g., intercom systems, audio mixers) to the appropriate input/output ports on the rear panel. Refer to the auxiliary section on the front panel for input/output selection and level adjustments.

4.5 Registering Beltpacks/Headsets

To enable communication, BP410 beltpacks and WH410 headsets must be registered with the BS410 base station. Follow the specific registration procedure outlined in the separate beltpack/headset manuals. The front panel 'REG' button and 'STATUS' display on the BS410 will assist in this process.

5. Иштөө нускамалары

5.1 Күйгүзүү/өчүрүү

басыңыз КҮЧ switch on the front panel to turn the unit ON. The АБАЛЫ display will illuminate. To power off, press the КҮЧ кайра которуу.

5.2 Алдыңкы панелдин башкаруу элементтери

• CLR/BND: Clear/Bind button for managing registered devices.
• АБАЛЫ: Digital display indicating system status or registration progress.
• REG: Button used for initiating the registration process for new devices.
• UNLATCH: Button to unlatch the talk function.
• RECEIVE A/B: Indicators for active receive channels.
• AUXILIARY Section: Contains controls for 2-wire and 4-wire input/output levels, input assignment (A/B), and auto nulling for audio bridging.
• HEADSET Controls: камтыйт VOLUME knob for headset audio, MIC LEVEL knob for microphone input sensitivity, СЕЛ (Select) button, and СҮЙЛӨШҮҮ button for activating the headset microphone.

5.3 Establishing Communication

Once beltpacks/headsets are registered and powered on, they will automatically connect to the base station. Use the СҮЙЛӨШҮҮ button on the headset or beltpack to initiate communication. Adjust the VOLUME жана MIC LEVEL knobs on the front panel for optimal audio levels.

5.4 Audio Bridging

The auxiliary section allows you to bridge 2-wire and 4-wire audio. Use the ТАНДОО buttons and input/output level controls to configure the audio routing and ensure proper signal levels between connected systems.

6. Техникалык тейлөө

6.1 Тазалоо

To clean the unit, use a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners, as they may damage the finish or internal components. Ensure the unit is powered off and disconnected from the power source before cleaning.

6.2 Микропрограмма жаңыртуулары

Periodically check the Clear-Com webжеткиликтүү микропрограмма жаңыртуулары үчүн сайт. Микропрограмма жаңыртуулары иштин натыйжалуулугун жакшыртып, жаңы функцияларды кошуп же белгилүү көйгөйлөрдү чече алат. Микропрограмма жаңыртуу топтому менен берилген көрсөтмөлөрдү кылдаттык менен аткарыңыз.

6.3 Сактоо

If storing the unit for an extended period, disconnect all cables and store it in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store the unit in its original packaging or a protective case.

7. Кыйынчылыктарды

7.1 Күч жок

• Электр кабелинин түзмөккө да, розеткага да бекем туташтырылганын текшериңиз.
• Башка аспапка сайып, розетка иштеп жатканын текшериңиз.
• Check the power switch on the front panel is in the ON position.

7.2 Аудио жок / Аудионун сапаты начар

• Check all audio cable connections (2-wire, 4-wire, headset).
• тууралаңыз VOLUME жана MIC LEVEL knobs on the front panel.
• Ensure beltpacks/headsets are properly registered and within range.
• Verify the correct input/output selections in the auxiliary section.
• Perform an auto-null procedure if using 2-wire connections to eliminate feedback.

7.3 Beltpack/Headset Not Registering

• Ensure the beltpack/headset is powered on and in registration mode.
• басыңыз REG button on the BS410 front panel.
• Confirm the beltpack/headset is compatible with the BS410.
• Try moving the beltpack/headset closer to the base station during registration.

8. Техникалык шарттар

9. Кепилдик жана колдоо

Clear-Com products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed information regarding warranty terms, coverage, and duration, please refer to the warranty card included with your product or visit the official Clear-Com webсайт.

For technical support, troubleshooting assistance, or service inquiries, please contact Clear-Com customer support. Contact information can typically be found on the Clear-Com webсайтында же продукт документациясында.