IMI Heimeier 7500-00.500

IMI Heimeier 7500-00.500 термостатикалык баштык колдонуучунун колдонмосу

Модели: 7500-00.500

1. Продукт бүтүп калдыview

The IMI Heimeier 7500-00.500 Thermostatic Head is designed for precise control of radiator temperatures. It features a fine cylindrical design and is certified KEYMARK, conforming to DIN EN 215 standards. This thermostatic head is equipped with an M30 x 1.5 threaded connection for easy installation on compatible radiator valves.

  • Жиптүү туташуу: M30 x 1.5
  • Орнотуу диапазону: 6 °Cден 28 °Cге чейин
  • Сенсордун максималдуу температурасы: 50 °C
  • Тастыктоо: KEYMARK certified, DIN EN 215 compliant
IMI Heimeier 7500-00.500 Thermostatic Head
1-сүрөт: Фронт view of the IMI Heimeier 7500-00.500 Thermostatic Head. This image displays the main body of the thermostatic head, showing the temperature scale and the IMI Heimeier branding at the bottom.

2. Орнотуу жана орнотуу

The thermostatic head is designed for straightforward installation on radiator valves with an M30 x 1.5 threaded connection. Ensure the valve body is compatible before proceeding with installation.

  1. Даярдоо: Ensure the heating system is depressurized or the radiator valve is closed to prevent water leakage during installation.
  2. Remove Old Head (if applicable): Unscrew any existing thermostatic or manual head from the radiator valve.
  3. Жаңы башты бекитүү: Align the IMI Heimeier 7500-00.500 Thermostatic Head with the M30 x 1.5 threaded connection on the radiator valve.
  4. Коопсуз: Hand-tighten the head onto the valve until it is firmly seated. Avoid over-tightening, which could damage the threads.
  5. Агышууларды текшерүү: If the system was depressurized, repressurize it and check for any leaks around the connection point.
IMI Heimeier Thermostatic Head M30 x 1.5 Threaded Connection
2-сүрөт: View of the M30 x 1.5 threaded connection on the IMI Heimeier Thermostatic Head. This image highlights the metal ring and internal mechanism that connects to the radiator valve.

3. Иштөө нускамалары

The thermostatic head allows you to set the desired room temperature by rotating the control dial. The temperature range is from 6 °C (frost protection) to 28 °C.

  1. Температураны жөндөө: Rotate the outer ring of the thermostatic head to align the desired temperature setting with the indicator mark.
  2. Температура шкаласы: The scale typically ranges from '*' (frost protection, approximately 6 °C) to '5' (maximum heat, approximately 28 °C). Intermediate numbers like 20, 24, 28 represent specific temperature points.
  3. үшүктөн коргоо: Setting the head to the '*' position will maintain a minimum temperature (around 6 °C) to prevent pipes from freezing.
  4. Энергияны үнөмдөө: For optimal energy efficiency, set the thermostatic head to a comfortable temperature and avoid frequent, drastic adjustments.
IMI Heimeier Thermostatic Head Temperature Scale
3-сүрөт: Жакын план view of the temperature scale on the IMI Heimeier Thermostatic Head. The numbers 20, 24, and 28 are visible, indicating temperature settings in degrees Celsius.

4. Техникалык тейлөө

To ensure the longevity and proper functioning of your thermostatic head, follow these simple maintenance guidelines:

  • Тазалоо: Clean the exterior of the thermostatic head with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
  • Колду гана жуу: As per manufacturer instructions, the unit is designed for hand washing only if deeper cleaning is required for the exterior. Do not immerse the entire unit in water.
  • Тоскоолдуктарды болтурбоо: Пардалардын, эмеректердин же башка буюмдардын термостатикалык башты тосуп калбаганын текшериңиз, анткени бул температураны так сезүүгө тоскоол болушу мүмкүн.

5. Кыйынчылыктарды

If you encounter issues with your IMI Heimeier Thermostatic Head, consider the following:

КөйгөйМүмкүн себепЧечим
Head does not fit the valve.Incompatibility with the valve's threaded connection, even if marked M30 x 1.5. Some manufacturers may have slight variations.Verify the specific valve manufacturer's compatibility requirements. Adapters may be available for certain valve types. Consult a plumbing professional if unsure.
Radiator not heating or overheating.Thermostatic head sensor obstructed, valve pin stuck, or incorrect temperature setting.Ensure the head is not covered. Remove the head and check if the valve pin moves freely. Adjust the temperature setting.

6. Техникалык шарттар

ӨзгөчөлүкДеталь
ӨндүрүүчүIMI Heimeier
Модель номери7500-00.500
Threaded ConnectionM30 x 1.5
Орнотуу диапазону6 °Cден 28 °Cге чейин
Max. Sensor Temperature50 °C
Өлчөмдөрү (пакет)9.4 x 4.7 x 4.4 см
Салмагы (пакет)130 грамм
OriginГермания
Care InstructionsHand wash only (exterior)
IMI Heimeier Thermostatic Head Dimensions
4-сүрөт: Image illustrating the approximate dimensions of the IMI Heimeier Thermostatic Head, showing a height of 3.5 inches (8 cm).

7. Кепилдик жана колдоо

Specific warranty details are not provided in the product information. For warranty claims, technical support, or further inquiries, please contact IMI Heimeier directly or the retailer from whom the product was purchased.

You can often find contact information on the official IMI Heimeier webсайт же продуктуңуздун документтери аркылуу.

Тектеш документтер - 7500-00.500

Preview IMI Heimeier Eclipse 300 恒温散热器阀技术规格与应用指南
了解 IMI Heimeier Eclipse 300恒温散热器阀的详细技术规格、关键特性和应用。该阀门具有自动流量限定功能,易于调整,适用于各种供暖系统,提供高效节能的解决方案。
Preview IMI Heimeier Eclipse 300: Техникалык маалыматтар, орнотуу жана спецификациялар
HVAC тутумун долбоорлоо жана тейлөө үчүн зарыл болгон IMI Heimeier Eclipse 300 термостатикалык клапан кыймылдаткычы үчүн комплекстүү техникалык маалыматтар, орнотуу боюнча көрсөтмөлөр жана иштөө мүнөздөмөлөрү.
Preview Heimeier Tempset орнотуу жана иштетүү боюнча колдонмо
IMI Heimeier Tempset термостатикалык аралаштыргыч клапанын орнотуу жана иштетүү боюнча комплекстүү колдонмо, анын ичинде диаграммалар жана температураны орнотуу жана өчүрүү боюнча кадам-кадам нускамалар.
Preview IMI Heimeier Dynatec Eclipse пол жылытуу коллекторлору
IMI Heimeier Dynatec Eclipse - бул бөлмөнүн температурасын жеке көзөмөлгө алуу жана эффективдүү гидравликалык баланстоо үчүн иштелип чыккан агымдын автоматтык башкаруусу бар пол жылытуу коллектору. Бул документте анын өзгөчөлүктөрү, техникалык мүнөздөмөлөрү, иштеши жана жеткиликтүү аксессуарлар камтылган.
Preview IMI HEIMEIER EMO 3 моторлуу үч чекиттүү кыймылдаткычты орнотуу боюнча колдонмо
IMI HEIMEIER EMO 3 моторлуу үч чекиттүү кыймылдаткычты орнотуу нускамасы, анын колдонулушу, функциясы, монтажы жана HEIMEIER термостатикалык клапандар менен колдонуу үчүн техникалык мүнөздөмөлөрү.
Preview IMI Heimeier Retro S – Set Thermostat Valve Upgrade
Information on the IMI Heimeier Retro S – Set, a thermostat head and retrofit upper part for upgrading heating systems. Features easy pre-setting, durable design, and technical specifications.