FatShark HDO Dominator FSV1122 OLED FPV көз айнектери колдонуучунун колдонмосу

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your FatShark HDO Dominator FSV1122 OLED FPV Goggles. The HDO series features OLED display technology, offering enhanced color vibrancy and contrast for an improved FPV experience. Please read this manual thoroughly before using your goggles to ensure optimal performance and safety.

Маанилүү коопсуздук маалыматы

• Do not operate FPV equipment in areas where it may interfere with other electronic devices or critical systems.
• Always ensure your FPV system is properly configured and tested before flight.
• Avoid prolonged direct exposure to sunlight on the goggle lenses, as this can damage the OLED displays.
• Use only approved power sources and batteries. Incorrect voltage аппаратты бузушу мүмкүн.
• Keep the goggles away from water and moisture.
• Store the goggles in their protective case when not in use.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизде бар экенин текшериңиз:

• FatShark HDO Dominator FSV1122 FPV Goggles
• Zipper carry case with updated branding
• 18650 Батарея кармагыч
• DC DIY cable

Эскертүү: Receiver modules, diopter lenses, and head tracker modules are sold separately and are not included in the standard package.

Продукт бүттүview

Familiarize yourself with the various components and controls of your FatShark HDO Goggles.

1-сүрөт: Фронт view of the FatShark HDO Dominator FPV Goggles, showing the main housing and "FAT SHARK" branding.

2-сүрөт: Side view of the goggles, highlighting the control buttons for channel (CH), display, and volume (VOL), along with the modular bay cover.

3-сүрөт: Төмөнкү view of the goggles, showing the IPD adjustment sliders, modular bay, and control buttons for volume, channel, and display settings.

4-сүрөт: Жакын план view of the integrated fan system, designed to prevent fogging and maintain optimal viewшарттар.

5-сүрөт: The FatShark HDO Goggles alongside their protective zipper carry case and the included 18650 battery holder.

Негизги компоненттер:

• OLED Displays: High-resolution 960 x 720 screens for vivid imagery.
• Modular Bay: Allows for installation of various receiver modules (e.g., 5.8GHz, 1.3GHz, 2.4GHz) and head trackers.
• IPD Adjusters: Sliders to adjust the interpupillary distance for optimal viewсооронуч.
• Башкаруу баскычтары: For channel selection, volume, and display settings.
• HDMI киргизүү: Supports up to 1080P for external video sources.
• Integrated Fan: Prevents lens fogging.

Орнотуу колдонмосу

1. Батареяны орнотуу

1. Open the 18650 Battery Holder.
2. Insert two 18650 Li-ion batteries (not included) into the holder, ensuring correct polarity.
3. Батарея кармагычты бекем жабыңыз.
4. Connect the battery holder's DC plug to the power input port on the goggles.

Маанилүү: Ensure batteries are fully charged before first use. The 18650 battery holder is designed for 2S (7.4V) operation.

2. Receiver Module Installation (Optional)

1. Locate the modular bay on the side of the goggles.
2. Carefully insert your desired FPV receiver module (e.g., 5.8GHz Raceband module) into the bay, ensuring it is seated firmly.
3. Connect any external antennas to the module if required.

3. Head Tracker Module Installation (Optional)

1. If using a head tracker module (e.g., Trinity 3-axis), insert it into the designated modular bay.
2. Refer to the head tracker module's specific instructions for calibration and usage.

4. IPD (Interpupillary Distance) Adjustment

1. Put on the goggles.
2. Adjust the IPD sliders (located on the bottom of the goggles) until the image appears clear and comfortable, with no overlapping or blurry edges. The optimal range is 59-69mm.

5. Diopter Lens Installation (Optional)

1. If you require vision correction, purchase compatible diopter lenses (-2, -4, -6 dpt sold separately).
2. Carefully insert the diopter lenses into the slots in front of the goggle optics.

Иштөө нускамалары

1. Күйгүзүү / Өчүрүү

Connect the battery to the goggles. The goggles will power on automatically. Disconnect the battery to power off.

2. Негизги башкаруу элементтери

• Channel (CH) Buttons: Use the up/down CH buttons to cycle through available video channels on your installed receiver module.
• Volume (VOL) Buttons: Adjust the audio volume using the up/down VOL buttons.
• Display/Control Buttons: These buttons are used to navigate menus and adjust display settings (e.g., brightness, contrast) or control specific functions of an installed module. Refer to the module's manual for detailed control functions.

3. Switching Video Inputs (Analog/HDMI)

The HDO goggles support both analog FPV feeds (via receiver module) and HDMI input.

1. To switch between analog and HDMI input, use the designated input selection button or menu option (specific button may vary based on firmware/module).
2. When using HDMI, connect your HDMI source (e.g., PC, drone controller with HDMI output) to the mini HDMI port on the goggles. The goggles support HDMI-in at 1080P.

Техникалык тейлөө

1. Cleaning the Lenses and Displays

• Use a soft, lint-free microfiber cloth specifically designed for optics to clean the goggle lenses and OLED displays.
• Do not use abrasive materials or chemical cleaners, as these can damage the optical surfaces.
• Gently wipe away dust and smudges. For stubborn marks, lightly dampдистилденген суу менен кездемеге.

2. Батареяга кам көрүү

• Always use a compatible charger for your 18650 Li-ion batteries.
• Батареяларды ашыкча заряддабаңыз же ашыкча разрядтабаңыз.
• Батареяларды күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• If the battery holder or batteries show signs of damage, discontinue use immediately.

3. Жалпы кам көрүү

• Keep the goggles in their protective carry case when not in use to prevent dust and physical damage.
• Avoid dropping or subjecting the goggles to strong impacts.

Проблемаларды чечүү

No Image or Black Screen

• Батарея толук заряддалганын жана туура туташтырылганын текшериңиз.
• Verify that the receiver module is correctly installed and powered.
• Check that the video transmitter on your drone/aircraft is powered on and transmitting on the correct channel.
• If using HDMI, ensure the cable is securely connected and the source is active. Confirm the goggles are set to HDMI input.

Blurry Edges or Image

• Adjust the IPD sliders until the image is clear across the entire field of view.
• If you have vision impairment, consider installing optional diopter lenses.
• Ensure the goggle lenses are clean and free of smudges or dust.

Кыска батареянын иштөө мөөнөтү

• Ensure you are using high-quality 18650 batteries with sufficient capacity.
• Verify that the batteries are fully charged before use.
• Battery performance can degrade over time; consider replacing old batteries.

Goggles Fogging Up

• Activate the integrated fan to circulate air and prevent fogging.
• Желдетүүчү вентиляторлордун тоскоол болбогонун текшериңиз.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the official FatShark webсайтка же ыйгарым укуктуу дилериңизге кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Product support resources, including firmware updates and additional documentation, may be available on the manufacturer's webсайт.