Introduction
The Atomi Qi Wireless Charge Stand provides a convenient and efficient way to charge your Qi-enabled devices. Designed for fast charging, it offers a stable and angled platform for optimal viewing while your device powers up. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your wireless charge stand.
Image: The Atomi Qi Wireless Charge Stand shown with its retail packaging, highlighting key features.
Жайгашуу
- Аппаратты таңгактан чыгаруу: Carefully remove the Atomi Qi Wireless Charge Stand from its packaging.
- Кубатка туташуу: Connect the included USB cable to the charge stand. Plug the other end of the USB cable into a compatible USB wall adapter (not included). For optimal fast charging performance, use a 10W or higher output USB wall adapter.
- Жайгашкан жери: Place the charge stand on a flat, stable surface. Ensure there is adequate ventilation around the device.
- Индикатор жарыгы: The non-disruptive LED indicator light on the front of the stand will illuminate to show its status.
Сүрөт: жакын план view of the Atomi Qi Wireless Charge Stand, illustrating its 45-degree viewing angle and the subtle LED indicator light.
Иштөө нускамалары
Using your Atomi Qi Wireless Charge Stand is simple:
- Түзмөгүңүздү жайгаштырыңыз: Gently place your Qi-enabled smartphone onto the charging surface of the stand. Ensure the phone is centered on the stand for proper alignment with the internal charging coils.
- Заряддоону ырастоо: The LED indicator light on the stand will change to confirm that your device is charging. Your device's screen will also typically show a charging icon or notification.
- Оптималдуу Viewing: The stand is designed to hold your phone at a perfect 45-degree viewing angle, allowing you to comfortably view notifications, watch videos, or make video calls while charging.
- Тез кубаттоо: This stand supports 10W Qi fast charging, enabling compatible devices to charge up to two times faster than standard wireless chargers.
Image: A smartphone resting on the Atomi Qi Wireless Charge Stand on a wooden desk, illustrating ease of use.
Image: A smartphone actively charging on the Atomi Qi Wireless Charge Stand, positioned on a coffee table in a living room environment.
Техникалык тейлөө
- Тазалоо: Disconnect the charger from power before cleaning. Use a soft, dry cloth to wipe the surface of the charge stand. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Сактагыч: When not in use, store the charge stand in a cool, dry place away from direct sunlight and extreme temperatures.
- Суюктуктардан алыс болуңуз: Keep the device away from water and other liquids. If the device comes into contact with liquid, disconnect it immediately and allow it to dry completely before re-use.
Проблемаларды чечүү
- Түзмөк кубатталбай жатат:
- Ensure the USB cable is securely connected to both the charge stand and the USB wall adapter.
- Verify that the USB wall adapter is properly plugged into a working power outlet.
- Confirm your device is Qi-enabled.
- Adjust the position of your device on the charging stand to ensure proper alignment with the internal charging coils.
- Remove any thick or metallic phone cases that may interfere with wireless charging.
- Жай кубаттоо:
- Ensure you are using a 10W or higher output USB wall adapter. Lower wattage adapters will result in slower charging speeds.
- Check if your phone supports 10W fast wireless charging. Some devices may only support standard 5W or 7.5W wireless charging.
- Avoid using your phone excessively while it is charging wirelessly, as this can slow down the charging process.
- LED көрсөткүч иштебей жатат:
- Ensure the charge stand is receiving power.
- If the issue persists, try a different USB cable or wall adapter.
Техникалык шарттар
| Продукциянын өлчөмдөрү | 2.7 x 2.7 x 6 дюйм |
| Элемент Салмагы | 4.8 унция |
| Байланыш технологиясы | Зымсыз |
| Өзгөчөлүктөр | Тез кубаттоо, зымсыз кубаттоо |
| Түс | Кара |
| Кутуда эмне бар | 1 x Charger (Wireless Charge Stand) |
| Өндүрүүчү | Atomi Inc. |
| Шайкеш түзмөктөр | Смартфондор |
| Шайкеш телефон моделдери | Qi-enabled, iPhone, Samsung Galaxy 8 series |
| Киргизүү көлөмүtage | 240 Volts (Note: This refers to internal component rating. The actual input from a USB adapter is typically 5V-12V depending on fast charging protocols.) |
| Монтаж түрү | Столдун үстү |
Кепилдик жана колдоо
For detailed warranty information and customer support, please refer to the official Atomi Smart website or the user guide PDF provided with your product. A digital version of the user guide can be accessed via this link: Atomi Qi Wireless Charge Stand User Guide (PDF).
For further assistance, please contact Atomi Smart customer service through their official channels.
