1. Киришүү
This instruction manual provides essential information for the safe and effective use of your OSRAM HMI DIGITAL 1200 W metal halide lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. This lamp is designed for professional applications in studio, stage, and television lighting.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: HMI lamps operate under high internal pressure and produce intense UV radiation and high luminance. Failure to follow safety guidelines can result in serious injury or property damage.
- Always operate this lamp exclusively in enclosed lamp casings specifically designed for HMI lamps.
- l камсыз кылууamp casing provides adequate UV protection.
- лга тийбеamp with bare hands. Oils from skin can cause hot spots and reduce lamp life. Use clean gloves during handling.
- lamp to cool completely before handling or attempting replacement.
- болгон учурда лamp breakage, mercury may be released. Follow local regulations for cleanup and disposal. Avoid direct contact with broken lamp бөлүктөр.
- Орнотуу жана тейлөө квалификациялуу кызматкерлер тарабынан гана аткарылышы керек.
- Электр энергиясы менен камсыз кылуу lamp's nominal voltage жана ватtage.
3. Продукт бүтүп калдыview
1-сүрөт: OSRAM HMI DIGITAL 1200 WLamp. This image displays the OSRAM HMI DIGITAL 1200 W lamp. It features a clear glass envelope revealing the internal arc tube and electrodes, mounted on an orange ceramic G38 base with two metal pins for electrical connection. The base is labeled with 'OSRAM HMI DIGITAL 1200W' and 'MADE IN CZECH REPUBLIC'.
3.1 Негизги өзгөчөлүктөрү
- High Color Rendering Index (CRI) of >90 for accurate color reproduction.
- UV-Stop (UVS) technology to minimize harmful UV emissions.
- Color temperature of approximately 6,000 K, simulating natural daylight.
- Extremely high luminous efficacy of up to 100 lumens per watt.
- Hot restart capability for quick re-ignition after a brief power interruption.
- Robust stem construction to enhance durability during transport and handling.
- Round moly-foil construction for even heat and current distribution, extending lamp узак өмүр.
- Dimmable functionality for flexible light output control.
3.2 Техникалык мүнөздөмөлөр
| Спецификация | Нарк |
|---|---|
| Модель номери | AM04730002G |
| Номиналдуу Ватtage | 1200 Вт |
| Номиналдуу томtage | 100 V |
| Номиналдуу ток | 12 А |
| Nominal Luminous Flux | 110,000 лм |
| Түс температурасы | 6,000 К |
| Түстөрдү көрсөтүү индекси (CRI) | Ra 90 |
| Диаметри | 40.0 мм |
| Узундук | 200.0 мм |
| Өмүр | 1,000 ч |
| Негизги түрү | G38 |
| Өзгөчө өзгөчөлүк | Dimmable |
4. Орнотуу жана орнотуу
Маанилүү: Installation must be performed by a qualified technician in accordance with all local electrical codes and safety regulations. Ensure the power is disconnected before beginning installation.
- Даярдоо: Ensure the fixture is compatible with a G38 base HMI lamp and rated for 1200 W. Verify the fixture is clean and free of debris.
- Башкаруу Лamp: Wear clean, lint-free gloves when handling the lamp. Avoid touching the glass envelope directly, as skin oils can cause damage.
- Кыстаруу: Carefully align the G38 base pins with the corresponding sockets in the fixture. Insert the lamp firmly but gently until it is fully seated. Do not force the lamp розеткага.
- Түзмөктү камсыз кылуу: Close and secure the lamp casing according to the fixture manufacturer's instructions. Ensure all safety interlocks are engaged.
- Кубат туташуу: Connect the fixture to the appropriate power supply (100 V, 12 A) via a suitable ballast. Ensure all electrical connections are secure.
- Алгачкы текшерүү: Before full operation, perform a brief test to ensure the lamp ignites correctly and operates without unusual flickering or noise.
5. Иштөө нускамалары
Бир жолу лamp is correctly installed in a compatible fixture and connected to a suitable ballast, follow these steps for operation:
- Күйгүзүү: Activate the power supply to the ballast. The lamp should ignite within a few seconds.
- Жылытуу мезгили: HMI lamps require a short warm-up period (typically 1-5 minutes) to reach full brightness and stable color temperature.
- алсыздатуу: If your ballast and fixture support dimming, adjust the light output as required. Refer to your ballast's manual for specific dimming procedures.
- Hot Restart: Бул лamp supports hot restart. If power is briefly interrupted, the lamp can re-ignite without a significant cooling period. However, frequent hot restarts can reduce lamp жашоо.
- Өчүрүү: l өчүрүү үчүнamp, deactivate the power supply to the ballast. Allow the lamp to cool down before any handling.
6. Техникалык тейлөө
Regular maintenance ensures optimal performance and extends the lifespan of your OSRAM HMI DIGITAL 1200 W lamp.
- Тазалоо: Periodically clean the exterior of the lamp and the fixture's reflector/lens with a soft, dry, lint-free cloth. Ensure the lamp is cool and power is disconnected before cleaning. Do not use abrasive cleaners.
- Текшерүү: дайыма текшерип туруу лamp for any signs of damage, such as cracks in the glass envelope or discoloration. Check the base for secure connection and signs of wear.
- Lamp Алмаштыруу: l алмаштырыңызamp when it reaches its rated lifespan (1,000 hours) or if its performance degrades significantly (e.g., reduced brightness, color shift, frequent flickering). Always use genuine OSRAM replacement lamps.
- Жоюу: Due to mercury content, dispose of spent or broken lampжергиликтүү айлана-чөйрөнү коргоо эрежелерине ылайык. Жалпы тиричилик таштандылары менен кошо таштабаңыз.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Lamp does not ignite. | No power to ballast; faulty ballast; incorrect lamp installation; lamp end-of-life. | Check power supply; verify ballast operation; re-seat lamp; replace lamp. |
| Lamp flickers or cycles. | Unstable power; ballast issue; lamp nearing end-of-life; improper ventilation. | Check power stability; inspect ballast; replace lamp; ensure adequate airflow around fixture. |
| Reduced brightness or color shift. | Lamp nearing end-of-life; dirty reflector/lens; incorrect ballast. | lamp; clean fixture optics; verify ballast compatibility. |
| Lamp breaks during operation. | Physical damage; excessive vibration; operating outside specified parameters; faulty fixture. | Immediately disconnect power. Follow safety precautions for mercury cleanup. Inspect fixture for damage. Consult qualified technician. |
If troubleshooting steps do not resolve the issue, contact OSRAM customer support or a qualified service technician.
8. Кепилдик жана колдоо
For information regarding the warranty terms and conditions for your OSRAM HMI DIGITAL 1200 W lamp, please refer to the documentation provided at the time of purchase or visit the official OSRAM website. For technical support, replacement parts, or service inquiries, please contact OSRAM customer service through their official channels.
Көбүрөөк маалымат жана байланыш маалыматтарын даректен таба аласыз Amazonдагы OSRAM дүкөнү.
