Продукт бүттүview
The Utilitech GYQ27-W is a white wire-in replacement motion sensor designed for outdoor lighting applications. It provides automatic light control by detecting motion and activating the light for a set duration. This sensor offers wide coverage and includes features for energy efficiency and manual override.
1-сүрөт: Фронт view of the Utilitech GYQ27-W White Wire-in Replacement Motion Sensor. The sensor features a compact, white housing with a translucent detection lens at the front and a threaded base for wire-in installation.
Негизги өзгөчөлүктөрү
- Автоматтык жарыкты башкаруу: Turns lights on when motion is detected.
- Жөнгө салынуучу таймер: Light remains on for 1, 3, or 10 minutes after motion ceases, with a 5-second test mode.
- Кеңири камтуу: Provides up to 240° coverage and 69-ft of downward perimeter protection.
- Күүгүмдөн таңга чейин сенсор: Automatically activates at dusk and deactivates at dawn.
- Кеңири шайкештик: Compatible with dimmable LED, dimmable CFL, halogen, and incandescent bulbs.
- Энергия үнөмдүүлүгү: Features 2-level brightness technology.
- Кол менен жокко чыгаруу: Allows the light to operate constantly for a selected period.
Орнотуу жана орнотуу
Proper installation is crucial for optimal performance and safety. It is recommended to consult a qualified electrician if you are unsure about any steps.
Коопсуздук чаралары
- Орнотуудан же тейлөөдөн мурун дайыма автоматтык өчүргүчтүн кубатын өчүрүңүз.
- Ensure wiring connections are secure and comply with local electrical codes.
- Максималдуу ваттан ашпаңызtage rating of the connected lighting fixture.
Орнотуу кадамдары
- Кубатты өчүрүү: Locate the circuit breaker controlling the outdoor light fixture and switch it to the OFF position. Verify power is off using a voltage сыноочу.
- Remove Existing Sensor (if applicable): Carefully disconnect the wiring from the old motion sensor or light fixture.
- Зымдарды туташтыруу: Follow the wiring diagram provided with your specific light fixture. Typically, this involves connecting the sensor's wires (line, load, neutral) to the corresponding wires from the power supply and the light fixture. Ensure all connections are tight and insulated with wire nuts.
- Тоо сенсору: Securely mount the Utilitech GYQ27-W motion sensor to the desired location. Ensure it has a clear line of sight to the area you wish to monitor.
- Күчтү калыбына келтирүү: Бардык туташуулар бекем орнотулуп, сенсор орнотулгандан кийин, автоматтык өчүргүчтөн кубат булагын кайра күйгүзүңүз.
Иштөө нускамалары
The GYQ27-W motion sensor offers several adjustable settings to customize its operation.
Орнотуулар
- Убакытты жөндөө: The sensor allows you to set the duration the light remains on after motion is detected. Common settings are 1, 3, or 10 minutes. Refer to the sensor's physical controls for specific adjustment methods (e.g., dial, switch).
- Сыноо режими: A 5-second test mode is available for initial setup and aiming. In this mode, the light will turn on for approximately 5 seconds each time motion is detected, regardless of the set time.
- Күүгүмдөн таңга чейин өзгөчөлүк: The integrated photocell automatically prevents the light from activating during daylight hours, conserving energy. The sensor will only activate the light when ambient light levels fall below a certain threshold.
- Сезимталдыкты жөндөө: Some models may include a sensitivity dial to adjust the range or sensitivity of motion detection. Adjust this to prevent false triggers from small animals or distant objects.
Кол менен жокко чыгаруу
To keep the light on continuously for a period, you can typically activate the manual override function. This is often done by quickly turning the light switch OFF and then ON within a few seconds. The light will then stay on until the override period expires or the switch is cycled again. Consult the specific instructions that came with your sensor for precise manual override steps.
Техникалык тейлөө
The Utilitech GYQ27-W motion sensor requires minimal maintenance to ensure long-term performance.
- Тазалоо: Сенсор линзасын мезгил-мезгили менен жумшак, d менен сүртүп туруңузamp чаңды, кирди же сөңгөктү кетирүү үчүн кездемеwebs that may obstruct the sensor's view. Do not use abrasive cleaners.
- Текшерүү: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure the sensor is still securely positioned.
- Экологиялык факторлор: Keep the area around the sensor clear of obstructions like tree branches or tall shrubs that could block the detection field or cause false triggers due to wind movement.
Проблемаларды чечүү
If your Utilitech GYQ27-W motion sensor is not functioning as expected, refer to the following common issues and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Кыймыл аныкталганда жарык күйбөйт. |
|
|
| Жарык тынымсыз күйүп турат. |
|
|
| Жарык эч кандай себепсиз күйөт (жалган триггерлер). |
|
|
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | GYQ27-W |
| Бренд | Utilitech |
| Түс | Ак |
| Power Source | Электр зымдары |
| Продукциянын өлчөмдөрү | 5 x 3 x 2 дюйм |
| Элемент Салмагы | 1.2 фунт |
| Максималдуу диапазон | 69 Фут |
| Камтуу бурч | 240° чейин |
| Шайкеш лампалар | Dimmable LED, Dimmable CFL, Halogen, Incandescent |
Кепилдик жана колдоо
Information regarding specific warranty terms for the Utilitech GYQ27-W motion sensor is not provided in this manual. For warranty details, technical support, or replacement parts, please refer to the original product packaging or contact Utilitech customer service directly.
You may also visit the official Utilitech webэң акыркы маалымат жана колдоо ресурстары үчүн сайт.
