Audibax Orlando 162 Plus PAR Light User Manual

1. Киришүү

The Audibax Orlando 162 Plus is a professional PAR light designed for various lighting applications. It features 54 x 3W RGB 3-in-1 LEDs, offering a wide range of color mixing capabilities. This device supports DMX control, automatic programs, sound-activated modes, and master/slave operation, making it suitable for stage lighting, events, and architectural illumination. This manual provides essential information for safe operation, setup, and maintenance.

2. Коопсуздук маалыматы

• Электр коопсуздугу: Always connect the device to a grounded power outlet. Ensure the voltage matches the device's requirements (AC90-240V, 50/60Hz). Disconnect power before cleaning or servicing.
• Жайгашкан жери: Install the fixture in a well-ventilated area, away from heat sources and flammable materials. Ensure stable mounting to prevent accidental falls.
• Колдонуу: Avoid direct eye exposure to the light source. Do not operate the device if the power cord is damaged. Do not attempt to repair the device yourself; refer servicing to qualified personnel.
• Курчап турган чөйрө: This device is intended for indoor use only. Protect it from moisture and extreme temperatures.

3. Пакеттин мазмуну

Таңгактан чыгарганда бардык буюмдар бар экенин текшериңиз:

• Audibax Orlando 162 Plus PAR Light
• Кронштейн орнотуу
• Электр кабели
• User Manual

4. Продукт бүтүп калдыview

The Audibax Orlando 162 Plus features a robust aluminum housing and an adjustable mounting bracket for versatile positioning.

Сүрөт 4.1: Алдыңкы view of the Audibax Orlando 162 Plus PAR light, showcasing the 54 RGB LEDs illuminated in green.

4.2-сүрөт: Каптал view of the PAR light, illustrating the adjustable mounting bracket for flexible installation.

Башкаруу панели жана байланыштар

The rear panel provides access to the control interface and input/output connections.

4.3-сүрөт: Арткы view of the PAR light, detailing the DMX IN/OUT ports, power input, digital display, and control buttons (MENU, UP, DOWN, ENTER).

• Санариптик дисплей: Shows current mode and parameter settings.
• MENU баскычы: Негизги меню параметрлери аркылуу өтөт.
• ЖОГОРУ/ТӨМӨН баскычтары: Adjust parameter values or navigate menu items.
• ENTER баскычы: Тандоолорду ырастайт.
• DMX IN/OUT: 3-pin XLR connectors for DMX signal connection.
• КУЧТУ КИРҮҮ: IEC power input for connecting the power cable.

5. Орнотуу

5.1 Монтаждоо

1. Attach the mounting bracket securely to the fixture using the provided screws.
2. Mount the fixture to a truss, ceiling, or stand using appropriate clamps and safety cables (not included). Ensure the mounting surface can support the weight of the fixture.
3. Adjust the angle of the fixture using the bracket's locking knobs.

5.2 Кубат туташтыруу

1. Connect the supplied power cable to the POWER IN socket on the rear of the fixture.
2. Электр кабелинин экинчи учун жерге туташтырылган ылайыктуу розеткага сайыңыз.

5.3 DMX туташуу (кошумча)

For DMX control, connect a DMX controller to the DMX IN port of the first fixture. Use DMX OUT to connect to the DMX IN of the next fixture in a daisy chain configuration.

• Use standard 3-pin XLR DMX cables.
• Ensure the DMX chain is terminated with a 120-ohm resistor at the last fixture for optimal signal integrity.

6. Иштөө нускамалары

Use the MENU, UP, DOWN, and ENTER buttons on the rear panel to navigate and select operating modes and parameters.

6.1 Меню Навигациясы

• Басыңыз МЕНЮ to cycle through the main menu options (e.g., DMX Address, Auto Mode, Sound Mode, Master/Slave).
• Колдонуу UP жана ылдый to adjust values or select sub-options within a menu.
• Басыңыз ENTER to confirm your selection or save changes.

6.2 Иштөө режимдери

The Orlando 162 Plus offers several operational modes:

• DMX режими: Allows external control via a DMX controller. Set the DMX address using the menu. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX protocol sheet) for specific control functions.
• Авто режим: The fixture runs through pre-programmed light shows automatically. Various auto programs may be available; use UP/DOWN to select.
• Үн иштетилген режим: The light patterns and changes respond to ambient sound detected by the built-in microphone. Adjust sensitivity if available.
• Master/Slave режими: Connect multiple Orlando 162 Plus fixtures. Set one unit as 'Master' and others as 'Slave'. The slave units will synchronize their operation with the master unit.
• Статикалык түс режими: Select a fixed color. The 3-in-1 RGB LEDs allow for a wide spectrum of colors.
• Strobe функциясы: Activates a flashing light effect. This can often be adjusted for speed.

6.3 Color Examples

7. Техникалык тейлөө

• Тазалоо: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
• Текшерүү: Periodically check power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
• Сактагыч: Колдонулбаган учурда, арматураны кургак, чаңсыз чөйрөдө сактаңыз.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

Audibax products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact Audibax customer support. For technical assistance or service inquiries, please visit the official Audibax webсайтка же жергиликтүү дилериңизге кайрылыңыз.