Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Belimo 90 Second, 45 in-lb Actuator. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Коопсуздук маалыматы
Жалпы коопсуздук: Always follow local codes and regulations. Disconnect all power to the system before performing any installation, wiring, or maintenance. Only qualified personnel should install and service this device.
Электр коопсуздугу: Ensure proper wiring and grounding. Avoid contact with live electrical components. Incorrect wiring can lead to electric shock or damage to the actuator and connected equipment.
Механикалык коопсуздук: Be aware of moving parts during operation. Do not attempt to force the actuator manually unless a specific manual override function is provided and power is disconnected. Keep hands and tools clear of the shaft and linkage during operation.
Продукт бүттүview
The Belimo 90 Second, 45 in-lb Actuator is a robust and reliable device designed for precise control in various industrial and HVAC applications, such as operating dampers or valves. It provides a nominal torque of 45 in-lb (approximately 5 Nm) and completes its full stroke in approximately 90 seconds.
Негизги өзгөчөлүктөрү:
- 45 in-lb (5 Nm) torque output
- 90-second run time for full stroke
- AC/DC 24V 50/60 Hz power supply
- NEMA 1 enclosure type for indoor use
- Screw mount installation
Actuator Components:
Бул сүрөт алдыңкы жагын көрсөтөт view of the Belimo actuator. Visible components include the main housing, the shaft connection mechanism (yellow ring), and the electrical connection points. The product label clearly indicates specifications such as AC/DC 24V power supply, 5 Nm torque, and 90-second run time.
Бул сүрөттө бир тарабы көрсөтүлгөн view of the actuator, highlighting the robust casing and the mechanical linkage for shaft rotation. The mounting bracket area is also visible, demonstrating the design for secure attachment.
Орнотуу жана орнотуу
Монтаждоо: The actuator is designed for screw mount installation. Ensure the mounting surface is stable, flat, and capable of securely supporting the actuator's weight and operational forces. Use appropriate fasteners for the mounting surface material.
Валдын туташуусу: Securely attach the actuator to the damper shaft or other controlled mechanism. Ensure proper alignment to prevent undue stress on the actuator or the controlled device. The shaft connection should be firm to avoid slippage during operation.
Электр зымдары:
- Кубатты өчүрүү: Always disconnect all power to the system before performing any wiring.
- Кубат булагына туташтыруу: Connect the AC/DC 24V power supply to the designated terminals. Refer to the wiring diagram printed on the actuator label for specific connections. The label indicates terminals for '1 Comm', '2 Close', and '3 Open', suggesting a 3-wire control scheme.
- Коопсуз байланыштар: Ensure all electrical connections are tight and secure. The connector type is screw terminals. Verify that wiring complies with all local electrical codes and standards.
This image provides another side perspective of the actuator, specifically highlighting the electrical terminal block and the NEMA 1 enclosure details. This view is crucial for identifying the correct wiring points.
Иштөө нускамалары
Once the actuator is correctly installed and wired, it will respond to control signals to move its shaft, thereby operating the connected damper or valve.
Баштапкы кубаттоо: Upon initial application of power, the actuator may perform a self-calibration cycle. Observe its movement to ensure it operates smoothly and without obstruction throughout its full range of motion.
Башкаруу сигналдары: The actuator operates based on electrical control signals. For this model, the '1 Comm', '2 Close', and '3 Open' terminals suggest a control method where applying power to '2 Close' or '3 Open' (relative to '1 Comm') will drive the actuator to the respective position. Consult your system's control diagram for specific signal requirements.
Кол менен жокко чыгаруу: If your specific actuator model is equipped with a manual override lever or button, refer to the markings on the device for its operation. Always ensure power is disconnected before attempting any manual override to prevent injury or damage.
Техникалык тейлөө
The Belimo 90 Second, 45 in-lb Actuator is designed for long-term, maintenance-free operation under normal environmental conditions. However, periodic inspection is recommended to ensure optimal performance and longevity.
Мезгилдүү текшерүү:
- Annually inspect the actuator for any signs of physical damage, corrosion, or excessive wear.
- Check all electrical connections for tightness and ensure there are no signs of corrosion or overheating.
- Verify the smooth operation of the shaft and the connected mechanism. Ensure there are no obstructions preventing full travel.
- Confirm that all mounting screws are secure and the actuator is firmly attached.
Маанилүү: Do not attempt to lubricate internal components or disassemble the actuator. Doing so may void the warranty and cause damage to the unit.
Проблемаларды чечүү
This section provides solutions to common operational issues. For problems not listed or if issues persist, contact qualified service personnel or Belimo technical support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Актуатор кыймылдабайт | No power supply; incorrect wiring; faulty control signal; internal fault | Электр менен камсыздоону текшерүү томtage and connections; verify wiring against diagram; test control signal source; if all checks fail, contact support |
| Actuator moves erratically or not to full stroke | Loose electrical connections; unstable control signal; mechanical obstruction; incorrect end-stop settings (if applicable) | Secure all connections; check control signal stability; inspect for physical obstructions; verify end-stop adjustments |
| Иштеткыч адаттан тыш үн чыгарат | Mechanical obstruction; worn gears; internal damage | Inspect for external obstructions; if noise persists and is internal, contact service personnel |
| Actuator is hot to the touch | Overload; continuous operation without rest; incorrect voltage | Check for mechanical binding or overload; ensure proper duty cycle; verify correct supply voltage |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Belimo |
| Модель номери | 90 секунд |
| Момент | 45 in-lb (5 Nm) |
| Run Time | 90 секунд |
| Тtage | AC/DC 24V 50/60 Hz (as per product label) |
| Энергияны керектөө | 2.0 VA / 1.5 Вт |
| Туташтыргыч түрү | Бурама |
| Байланыштардын саны | 2 (Control: 1 Comm, 2 Close, 3 Open) |
| Монтаж түрү | Screw Mount |
| Короонун түрү | Нема 1 |
| Өндүрүүчү | Belimo |
| Дата биринчи жеткиликтүү | 22-июнь, 2018-жыл |
Кепилдик жана колдоо
Warranty information for this specific product is not detailed in the provided data. For comprehensive warranty terms, conditions, and duration, please refer to the official Belimo website or contact your authorized Belimo dealer or distributor.
For technical assistance, troubleshooting beyond this manual, or to inquire about service, please contact Belimo customer service or a certified technician. Ensure you have your product model number and any relevant purchase information available when seeking support.
