INTEX SX1500 Krystal Clear Sand Filter Pump

Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Intex Krystal Clear Sand Filter Pump. Please read this manual thoroughly before attempting to install or operate the pump. Keep this manual for future reference.

Коопсуздук маалыматы

WARNING: Risk of Electric Shock. Connect only to a grounding type receptacle protected by a Ground-Fault Circuit Interrupter (GFCI).

• Always disconnect the power cord from the electrical outlet before servicing or performing any maintenance on the pump.
• Электр шнур же сайгыч бузулуп калса, насосту иштетпеңиз.
• Чыгып кетпөө үчүн насостун катуу, тегиз жерге коюлганын текшериңиз.
• Иштеп жаткан учурда балдарды насостун жана бассейндин аймагынан алыс кармаңыз.
• Never run the pump dry. Ensure the pump is primed with water before starting.

Продукт өзгөчөлүктөрү

• Hydroaeration Technology: Improves water circulation, clarity, and freshness by injecting air into the water, accelerating circulation and joining fine particles into larger clusters for more effective filtration.
• Натыйжалуу фильтрация: Designed for above ground pools up to 8,400 gallons, providing a 1500 GPH (gallons per hour) pump flow rate and a 1050 GPH system flow rate.
• Integrated 24-Hour Timer: Features a built-in timer with pre-set cycles from 2 to 12 hours for automatic operation, simplifying pool maintenance.
• Туруктуу курулуш: Made from high-quality plastic materials for longevity and reliable performance.

Компоненттер бүттүview

The Intex Krystal Clear Sand Filter Pump consists of several key components:

• Насос блогу: The motor and impeller that draw water through the system.
• Фильтр танкы: Houses the filter sand (or other media) that traps debris.
• 6 жолдуу көп порттуу клапан: Controls the water flow for different operations (Filter, Backwash, Rinse, Waste, Recirculate, Closed).
• Басым өлчөгүч: Indicates the pressure inside the filter tank, helping determine when backwashing is needed.
• Башкаруу панели: Features power button, lock button, and timer settings for easy operation.
• Шлангдар жана туташтыргычтар: For connecting the pump to your pool's inlet and outlet fittings.

Орнотуу жана орнотуу

The Intex Krystal Clear Sand Filter Pump requires partial assembly. Follow these general steps for installation:

1. Компоненттерди таңгактан чыгаруу: Таңгактан кылдаттык менен бардык бөлүктөрүн алып салыңыз.
2. Assemble Base and Tank: Secure the filter tank onto the pump base.
3. Чыпка медиа кошуу: Fill the filter tank with the recommended amount of filter sand (not included) according to the instructions provided with the sand.
4. Көп порттуу клапанды бекитүү: Securely attach the 6-way multi-port valve to the top of the filter tank.
5. Шлангдарды туташтыруу: Connect the provided hoses from the pump to your pool's inlet and outlet fittings. Ensure all connections are tight to prevent leaks.
6. Насосту иштетиңиз: Before starting, ensure the pump is filled with water to prevent airlocks and damage.
7. Электр байланышы: Plug the pump into a grounded electrical outlet protected by a GFCI.

Операция

The 6-way multi-port valve allows you to select different operating modes:

• Чыпка: Normal filtering operation. Water flows through the sand and returns to the pool.
• АРТКА ЖУУ: Reverses water flow to clean the sand filter. Water is directed to waste.
• ЖУУ: Used after backwashing to settle the sand and flush out any remaining dirt from the waste line.
• ТАШТАНДЫЛАР (АГЫЗУУ): Bypasses the filter, sending water directly out of the waste port. Useful for lowering pool water level or vacuuming heavy debris directly to waste.
• КАЙРА АЙЛАНА: Чыпканы айланып өтүп, сууну түз эле бассейнге кайтарат. Химиялык заттарды чыпкалабай аралаштыруу үчүн пайдалуу.
• ЖАБЫК: Shuts off all flow to the filter and pool. Use only when the pump is off.

Use the built-in 24-hour timer to set automatic operating cycles for convenience. Refer to the control panel section in your detailed manual for specific timer programming instructions.

Техникалык тейлөө

Regular maintenance ensures optimal performance and longevity of your sand filter pump:

• Артка жуу: Perform backwashing when the pressure gauge reading is 5-10 PSI above the clean filter pressure, or when pool water clarity decreases. This cleans the sand media.
• Чайкоо: Always rinse the filter after backwashing to prevent dirty water from returning to the pool.
• Кумду алмаштыруу: Чыпка кумду, адатта, колдонуунун көлөмүнө жана суунун сапатына жараша ар бир 3-5 жылда алмаштырып туруу керек.
• Кыштоо: Properly drain and store the pump and filter during off-season to prevent freezing damage.

Проблемаларды чечүү

Техникалык шарттар

• Бренд: Intex
• Модель номери: 26643EG
• Насостун агымынын ылдамдыгы: 1500 GPH (5,678 LPH)
• Системанын агым ылдамдыгы: 1050 GPH (3,974 LPH)
• Suitable Pool Capacity: 8,400 галлонго чейин
• Кубат булагы: Электр зымдары
• Тtage: 120 вольт
• Ватtage: 120 ватт
• Материал: Пластик
• Продукциянын өлчөмдөрү: 15"L x 12.5"W x 20.5"H
• Элемент Салмагы: 24.73 фунт

Кепилдик маалымат

This Intex Krystal Clear Sand Filter Pump is covered by a 2 жылдык өндүрүүчүнүн кепилдиги from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your product or visit the official Intex webсайт.

Кардарларды колдоо

For further assistance, technical support, or to inquire about replacement parts, please contact Intex customer service. You can typically find contact information on the official Intex website or through the retailer where you purchased the product. When contacting support, please have your model number (26643EG) and purchase date readily available.