Introduction
This manual provides essential information for the safe and efficient operation of your VEVOR 6KW Sauna Heater. Please read all instructions carefully before installation, operation, or maintenance. Retain this manual for future reference.
Маанилүү коопсуздук нускамалары
- Электр коркунучу: Орнотуу бардык жергиликтүү жана улуттук электр эрежелерине ылайык квалификациялуу электрик тарабынан аткарылышы керек. Туура жерге туташтырууну камсыз кылуу.
- Күйүк коркунучу: The sauna heater and stones become extremely hot during operation. Avoid direct contact. Keep children and pets away from the heater.
- Өрт коркунучу: Do not place flammable materials near the heater. Ensure adequate clearance from walls and benches as specified in the installation section. Do not operate without sauna stones.
- Вентиляция: Proper ventilation is crucial for safe operation. Ensure the sauna room has adequate air circulation.
- Сууну пайдалануу: Only pour small amounts of water onto the hot stones to create steam. Excessive water can damage the heating elements and pose a safety risk.
- Тейлөө: Кандайдыр бир тейлөө же тазалоо иштерин жүргүзүүдөн мурун электр энергиясын өчүрүңүз.
Продукт бүттүview
The VEVOR 6KW Sauna Heater is designed for dry steam baths in home and commercial sauna rooms. It features a durable stainless steel construction, efficient heating coils, and an internal control system for easy temperature and time adjustments.
Figure 1: VEVOR 6KW Sauna Heater with internal controls.
Негизги өзгөчөлүктөрү:
- Премиум курулуш: Stainless steel shell for durability and corrosion resistance.
- Тез жылытуу: 316 stainless steel heating coils ensure rapid heat-up.
- Ички контроль: Integrated knobs for adjusting temperature (up to 90°C) and operating time (up to 60 minutes).
- Дубалга орнотулган дизайн: Space-saving installation with pre-drilled brackets.
- Suitable Room Size: Designed for sauna rooms between 5-9m³ (176-318 cubic feet) with a height of approximately 190cm.
Figure 2: Illustration of the sauna heater's stainless steel structure and heating elements.
Figure 3: Close-up of the built-in temperature and timer controls.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Күч | 6КВт |
| Сауна түрү | Кургак буу |
| Working Voltage | 220-240V |
| Зымдын талабы | 3*10 (N*mm²) |
| Heating Coil Material | 316 Дат баспас болот |
| Shell Material | 430 Дат баспас болот |
| Макс Температура | 90°C (194°F) |
| Таймер диапазону | Макс. 60 мүнөт |
| Suitable Sauna Room Volume | 5-9m³ (176-318 cubic feet) |
| Suitable Sauna Room Height | Approx. 190cm (6.2 feet) |
| Sauna Stone Requirement | Approx. 18kg (35 lbs) - камтылган эмес |
| Продукциянын өлчөмдөрү | 16.93 x 13.78 x 24.41 дюйм (43 x 35 x 62 см) |
| Элемент Салмагы | 24.2 фунт (11 кг) |
| Сертификаттар | UL(us) Certified, CE IPX4 |
4-сүрөт: Продукциянын деталдуу өлчөмдөрү жана мүнөздөмөлөрү.
Орнотуу жана орнотуу
Installation of the VEVOR Sauna Heater requires careful attention to electrical and safety guidelines. It is highly recommended that a qualified electrician performs the electrical wiring.
1. Pre-Installation Considerations:
- Ensure your sauna room meets the recommended volume and height requirements (5-9m³, approx. 190cm height).
- Verify that your electrical supply matches the heater's requirements (220-240V).
- Prepare the necessary wiring (3*10 N*mm² wire recommended).
- Сауна бөлмөсүндө жетиштүү желдетүүнү камсыз кылыңыз.
Video 1: This video demonstrates the detailed display and features of the sauna heater, including its internal components and controls.
2. Жылыткычты орнотуу:
- Measure the distance of the screw holes on the back of the sauna stove.
- Mark the corresponding positions on the sauna room wall.
- Install screws on the wall, ensuring they are approximately 35cm (13.8 inches) above the ground.
- Carefully hang the sauna stove onto the installed screws, ensuring it is securely in place.
Figure 5: Illustration of the wall-mounted installation process, showing the pre-drilled brackets.
3. Electrical Wiring (220-240V):
ЭСКЕРТҮҮ: Electrical installation must be performed by a licensed electrician. Ensure power is disconnected at the main breaker before starting any wiring.
- Locate the wiring terminal block inside the heater's control panel.
- Connect the L1 and L2 (live) wires from your power supply to the corresponding L1 and L2 terminals on the heater.
- Connect the ground wire to the ground terminal (marked with a ground symbol).
- Бардык байланыштар бекем жана коопсуз экендигин текшериңиз.
Video 2: This video provides a step-by-step guide on how to wire the sauna heater for operation, including connecting the power cord and temperature probe.
4. Loading Sauna Stones:
- Place approximately 18kg (35 lbs) of sauna stones into the stone compartment.
- Ensure the stones are not packed too densely to allow for proper air circulation and heat distribution.
- The stones should cover the heating elements but not obstruct the air vents.
- Note: Sauna stones are not included with the heater.
Figure 6: Sauna heater with stones in place, ready for use.
Иштөө нускамалары
Once installed and wired correctly, your VEVOR Sauna Heater is ready for operation.
1. Таймерди орнотуу:
- Turn the timer knob to your desired operating time, up to a maximum of 60 minutes.
- The heater will begin to heat once the timer is set.
2. Температураны жөндөө:
- Turn the temperature knob to set the desired sauna temperature. The maximum temperature is 90°C (194°F).
- Жылыткыч белгиленген температураны кармап туруу үчүн күйүп-өчөт.
3. Creating Steam (Löyly):
- Once the stones are hot, carefully ladle small amounts of water onto them to create steam.
- Do not pour large quantities of water at once, as this can damage the heater and create excessive steam.
- Таза суу гана колдонуңуз.
Figure 7: Enjoying a sauna session with steam generated by the heater.
Техникалык тейлөө
Regular maintenance ensures the longevity and safe operation of your sauna heater.
- Тазалоо: Жылыткычтын сыртын мезгил-мезгили менен аарчып туруңузamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Stone Inspection: Inspect sauna stones regularly for signs of crumbling or deterioration. Replace any broken or worn-out stones to ensure efficient heating and prevent damage to the elements.
- Электр байланыштары: Annually, have a qualified electrician inspect all electrical connections for tightness and signs of wear.
- Вентиляция: Ensure that air vents are not blocked by debris or lint.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жылыткыч күйбөйт. | No power supply, tripped circuit breaker, faulty wiring, timer not set. | Check power supply and circuit breaker. Verify wiring connections. Ensure timer is set correctly. Consult a qualified electrician if issues persist. |
| Жылыткыч каалаган температурага жетпей жатат. | Incorrect temperature setting, insufficient sauna stones, poor room insulation, ventilation issues, faulty heating element. | Adjust temperature setting. Ensure sufficient and properly placed sauna stones. Check sauna room insulation and ventilation. Contact customer support if heating elements are suspected to be faulty. |
| Excessive steam or water dripping. | Too much water poured onto stones, stones not hot enough. | Pour smaller amounts of water. Allow stones to heat thoroughly before adding water. |
| Иш учурунда адаттан тыш үндөр. | Loose components, stones shifting, normal expansion/contraction. | Ensure heater is securely mounted. Rearrange stones if they are unstable. Some minor noises from thermal expansion are normal. |
Кепилдик жана колдоо
For warranty information, technical support, or replacement parts, please contact VEVOR customer service. Refer to your purchase documentation for specific warranty terms and conditions.
Өндүрүүчү: VEVOR
Webсайт: www.vevor.com
