Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Foxeer Predator Micro V2 FPV Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Продукт бүттүview
The Foxeer Predator Micro V2 is a high-performance FPV camera designed for racing drones and other multirotors. It features Super WDR, 1000TVL resolution, and an On-Screen Display (OSD) for easy configuration.
Image: Foxeer Predator Micro V2 FPV Camera, front view.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Жогорку чечим: 1000TVL for clear image quality.
- Super WDR: Excellent performance in varying light conditions.
- Төмөн күтүү: Minimum to 4ms for responsive FPV flying.
- OSD: Built-in On-Screen Display for easy settings adjustment.
- Компакт өлчөмү: Lightweight at 5.5g (excluding bracket) and small dimensions (18.6 x 19.0mm).
- Wide Voltage киргизүү: Supports 5-40V.
Image: Visual representation of the Predator Micro V2 highlighting clearer image quality, brighter dark zones, and new DSY/NIGHT, LED, and V CAL features.
Image: Depiction of the camera's low latency, showing the camera transmitting to a monitor with minimal delay.
Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз. Эгерде кандайдыр бир буюмдар жок же бузулуп калса, сатуучуга кайрылыңыз.
- 1x Foxeer Predator Micro V2 Camera
- 1x OSD тактасы
- 1x Серво кабели
- 1x OSD Cable
- 1x кашаа
- 4x Gasket Rings
- 4x кашаа буроолор
- 2x Case Screws
- 1x Колдонуучунун колдонмосу
Image: All components included in the Foxeer Predator Micro V2 package, including the camera, OSD board, cables, bracket, and screws.
Техникалык шарттар
Detailed technical specifications for the Foxeer Predator Micro V2 FPV Camera:
Image: A table summarizing the technical specifications of the Foxeer Predator Micro V2 camera.
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | Foxeer Predator Micro V2 |
| Резолюция | 1000TVL |
| TV системасы | NTSC |
| CVBS | 4:3 Экран |
| Кечигип калуу | Minimum to 4ms |
| OSD | Ооба |
| WDR | Ооба |
| Киргизүү көлөмүtage | 5-40V |
| Салмагы | 5.5g (excluding bracket) |
| Өлчөмү | 18.6 x 19.0 мм |
| V CAL | Тtage calibration, range -0.5~0.5 |
| КҮН/ТҮН | AUTO and Manual |
| Image Flip | Off/ H-Flip / V-Flip/ HV-Flip |
| Тилдер | English/ Deutsch/ Francais / Pyccknn / Portugues / Espanol / Chinese |
The camera features a 1.8mm lens with a FOV-D (Diagonal Field of View) of 150°.
Image: Diagram illustrating the Field of View (FOV-V, FOV-H, FOV-D) for the 1.8mm M8 lens, indicating a 150° diagonal field of view.
Жайгашуу
Орнотуу
- Монтаждоо: Use the provided bracket and screws to securely mount the Predator Micro V2 camera onto your drone frame. Ensure the camera is oriented correctly. The multi-functional bracket allows for easy switching between standard and mini sizes.
- Зымдар: Connect the camera to your flight controller or video transmitter using the provided servo cable and OSD cable. Ensure correct polarity for power (5-40V input). Refer to your flight controller/VTX manual for specific wiring diagrams.
Баштапкы кубаттуулук
After installation, connect power to your drone. The camera should power on and display video output.
Иштеп жатат
Экрандагы дисплей (OSD) менюсу
The Predator Micro V2 features an integrated OSD for easy configuration. Use the OSD board (joystick) to navigate and adjust settings.
Image: Screenshots of the OSD menu, showing options for setup (Camera ID, Picture Adjust, Day/Night, LED, V CAL, Camera Reset) and display settings (Time, Power, V CAL, LED).
Экранда навигация
- Connect the OSD board to the camera.
- Камераны күйгүзүңүз.
- Use the joystick on the OSD board to navigate through the menu options.
- Press the center button to select an option or confirm a setting.
- Move the joystick left/right to change values.
- Select "EXIT" to save changes and exit the menu.
Key OSD Settings
- КҮН ТҮН: Set to AUTO for automatic switching, or MANUAL to select permanent COLOR or B/W mode.
- LED: Adjust LED brightness (OFF/MID/DARK).
- V CAL (Voltage Калибрлөө): Көлөмдү тууралооtage reading with a range of -0.5 to 0.5.
- Сүрөттү которуу: Options include Off, H-Flip (horizontal), V-Flip (vertical), and HV-Flip (horizontal and vertical).
- Тилдер: Select from English, Deutsch, Francais, Pyccknn, Portugues, Espanol, or Chinese.
Техникалык тейлөө
- Тазалоо: Regularly clean the camera lens with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals.
- Текшерүү: Periodically inspect all cables and connections for signs of wear or damage. Ensure the camera is securely mounted.
- Сактагыч: When not in use, store the camera in a dry, dust-free environment, away from extreme temperatures.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Видео чыгаруу жок | Туура эмес зымдар; Электр жок; Бузулган кабель; ТВ системасынын туура эмес жөндөөсү. | Check all wiring connections for correct polarity and secure fit. Ensure power is supplied within the 5-40V range. Replace damaged cables. Verify TV System (NTSC) matches your receiver. |
| Image is dark/bright | Incorrect exposure settings; DAY/NIGHT mode issue. | Adjust exposure settings via the OSD menu. Check DAY/NIGHT mode; try setting it to AUTO or manually to COLOR/B&W. |
| Image is upside down/reversed | Image Flip setting enabled. | Access the OSD menu and set "Image Flip" to "Off". |
| OSD not appearing | OSD board not connected or faulty. | Ensure the OSD board is correctly connected to the camera. Test with another OSD board if available. |
| Тtage reading inaccurate | V CAL setting needs adjustment. | Use the OSD menu to adjust the "V CAL" setting to match a known voltage окуу. |
Кепилдик жана колдоо
Кепилдик жөнүндө маалымат жана техникалык колдоо алуу үчүн, сураныч, расмий FOXEER сайтына кайрылыңыз webсайтка кайрылыңыз же жергиликтүү дистрибьютериңиз менен байланышыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
For further assistance, you may visit the FOXEER store on Amazon: FOXEER Amazon Store.
