Introduction
This manual provides essential information for the safe and efficient use of your Artiss Adjustable Drafting Table and Stool Set, Model ZLJ38-SRK002. Please read these instructions carefully before assembly and operation to ensure proper functionality and longevity of the product. Keep this manual for future reference.
Коопсуздук маалыматы
ЭСКЕРТҮҮ:
- Always secure the desk to the floor to prevent tipping.
- Be cautious when adjusting the height or angle of the desk to avoid injury. Ensure all locking mechanisms are engaged before use.
- Чогултуу учурунда кичинекей бөлүктөрүн балдардан алыс кармаңыз.
Пакеттин мазмуну
Монтаждоону баштоодон мурун, төмөндө келтирилген компоненттердин бардыгы бар экенин жана бузулбаганын текшериңиз. Эгерде кандайдыр бир бөлүктөрү жок же бузулуп калса, чогултууну улантпаңыз жана кардарларды колдоо менен байланышыңыз.
- Artiss Drawing Desk x 1
- Stool x 1
- Assembly manual x 1
Жайгашуу
Assembly is required for this product. It is recommended that one person performs the assembly. Please refer to the included assembly manual for detailed, step-by-step instructions.
Ассамблея бүттүview:
- Бардык компоненттерди таңгактан чыгарып, чийиктерди болтурбоо үчүн таза, жумшак бетке жайыңыз.
- Identify all parts against the parts list in the separate assembly manual.
- Follow the instructions in the assembly manual to construct the desk frame.
- Attach the MDF desktop and secure all hardware.
- Табаны анын атайын көрсөтмөлөрүнө ылайык чогултуңуз.
- Install the side tray, drawers, and hollow metal shelf.
- Колдонуудан мурун, бардык бурамалар жана болттор бекем бекитилгенин текшериңиз.
Иштөө нускамалары
Үстөлдүн бийиктигин тууралоо:
The desk height can be adjusted from 68cm to 136cm to accommodate both sitting and standing positions. Locate the height adjustment knobs or levers on the desk legs. Loosen them, carefully raise or lower the desktop to your desired height, and then securely tighten the knobs/levers to lock the desk in place.
Adjusting Desk Top Angle:
The main desktop can be tilted from 0° to 60°. To adjust the angle, locate the tilting mechanism under the desktop. Release the locking mechanism, adjust the desktop to your preferred working angle, and then re-engage the lock to secure it.
Using Storage Features:
- Extra Slide-Out Table: A secondary table can be pulled out from under the main desktop to extend your working area.
- Removable Side Pigment Shelf: This shelf is designed to hold art supplies and can be attached or removed as needed.
- Removable Non-Woven Fabric Drawers: Two fabric drawers are provided for organized storage of smaller items. These can be easily inserted or removed from their compartments.
- Hollow Metal Shelf: A perforated metal shelf is located at the base of the desk, offering additional storage space.
Техникалык тейлөө
Тазалоо:
To clean the desk and stool, wipe surfaces with a damp кездеме. Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонуудан алыс болуңуз, анткени алар бетине зыян келтириши мүмкүн. Тазалагандан кийин столдун кургак экенине ынаныңыз.
Жалпы кам көрүү:
- Regularly check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Avoid placing excessively heavy items on the desk, especially on the tilted surface.
- Protect the MDF desktop from prolonged exposure to moisture or direct sunlight to prevent warping or discoloration.
Проблемаларды чечүү
Үстөлдүн туруксуздугу:
- Маселе: Үстел солкулдап же туруксуз сезилет.
- Чечим: Check that all assembly hardware (screws, bolts) are securely tightened. Ensure the desk is placed on a flat, level surface. Adjust the anti-scratch feet pads if necessary to compensate for uneven flooring.
Difficulty Adjusting Height/Angle:
- Маселе: The desktop height or angle adjustment mechanism is stiff or difficult to operate.
- Чечим: Ensure that the locking mechanisms are fully disengaged before attempting to adjust. Apply a small amount of silicone-based lubricant to moving parts if stiffness persists, avoiding contact with the desktop surface.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Сүрөтчү |
| Модель номери | ZLJ38-SRK002 |
| Frame Material | порошок менен капталган болот |
| Үстөлдүн үстүнкү материалы | MDF тактасы |
| Табуретканын материалы | Padded leather (seat), Steel (frame) |
| Overall Desk Dimensions | 120cm (W) x 60cm (D) x 68cm to 136cm (H) |
| Табуретканын өлчөмдөрү | 30см (W) X 30cm (D) X 51см (H) |
| Тартма өлчөмдөрү | 46см (W) X 31cm (D) X 10см (H) |
| Desk Top Adjustment | 0°тан 60°ка чейин |
| Түс | Natural and Black |
| Элемент Салмагы | 25 килограмм |
| Максималдуу салмак боюнча сунуш | 330 фунт |
| Ассамблея талап кылынат | Ооба |
| Ассамблеяга сунушталган адамдар | 1 |
Кепилдик
This Artiss product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.
Колдоо
For any questions, concerns, or assistance with your Artiss Adjustable Drafting Table and Stool Set, please contact the seller or manufacturer directly. Refer to your purchase documentation for contact details.
