1. Киришүү
This manual provides essential instructions for the safe operation, assembly, maintenance, and troubleshooting of your HECHT 135 BTS 2-stroke petrol brush cutter. Please read this manual thoroughly before using the equipment to ensure safe and efficient operation.
2. Коопсуздук нускамалары
Operating a petrol brush cutter requires strict adherence to safety guidelines to prevent injury. Always prioritize your safety and the safety of others.
2.1 Жеке коргонуу каражаттары (ЖКК)
- Көздү коргоо: Always wear safety glasses or a face shield to protect against flying debris.
- Угуу коргоо: Use earplugs or earmuffs to prevent hearing damage from engine noise.
- Колду коргоо: Wear sturdy work gloves to improve grip and protect hands.
- Бутту коргоо: Wear non-slip, steel-toed boots or sturdy footwear.
- Денени коргоо: Wear long pants and a long-sleeved shirt to protect skin from debris and sun. Avoid loose clothing that could get caught in moving parts.
2.2 Жалпы коопсуздук чаралары
- Колдонмону окуу: Иштөө алдында бардык көрсөтмөлөрдү жана эскертүүлөрдү түшүнүңүз.
- Area Inspection: Before starting, clear the work area of stones, metal objects, wires, and other debris that could be thrown or entangle the cutting head.
- Көрүүчүлөр: Keep all bystanders, children, and pets at a safe distance (at least 15 meters) from the operating area.
- Күйүүчү май иштетүү: Handle petrol with extreme care. Refuel in a well-ventilated area with the engine off and cool. Do not smoke while refueling.
- Туруктуу фундамент: Maintain firm footing and balance at all times. Do not overreach.
- Аба ырайы шарттары: Do not operate in rain or wet conditions, or when visibility is poor.
- чарчоо: Do not operate the brush cutter when tired, ill, or under the influence of alcohol or drugs.
- Тейлөө: Always turn off the engine and disconnect the spark plug before performing any maintenance, cleaning, or clearing blockages.
- Транспорт: Transport the brush cutter with the engine off and the cutting attachment protected.
3. Пакеттин мазмуну
Upon unpacking your HECHT 135 BTS brush cutter, verify that all components are present and undamaged:
- 1x HECHT 135 BTS Petrol Brush Cutter unit
- 1x 3-tooth Metal Blade (255 mm cutting width)
- 1x Dual-line Spool Head (430 mm cutting width)
- 1x жөндөлүүчү погон
- 1x Handlebar assembly
- 1x Cutting Guard
- 1x Tool Kit (for assembly and basic maintenance)
- 1x Колдонуучунун колдонмосу
4. Орнотуу жана чогултуу
Follow these steps to assemble your brush cutter before first use.
4.1 Ручканы бекитүү
- Рулду бошотуңуз clamp bolts on the main shaft.
- Position the handlebar onto the shaft at a comfortable working height and angle.
- Ensure all control cables are routed correctly and not pinched.
- Клamp коопсуз болттор.
4.2 Installing the Cutting Guard
- Slide the cutting guard onto the lower shaft, ensuring it is oriented correctly to protect against debris.
- Secure the guard with the provided screws or bolts. Do not operate the brush cutter without the guard properly installed.
4.3 Mounting the Cutting Head
Your HECHT 135 BTS comes with two interchangeable cutting heads: a 3-tooth metal blade and a dual-line spool head.
- Ensure the engine is off and the spark plug cap is removed.
- Insert the locking pin into the gearbox hole to prevent the shaft from rotating.
- For Metal Blade: Place the blade onto the shaft, ensuring it sits correctly on the support flange. Secure it with the washer and nut, tightening firmly (often left-hand thread).
- For Spool Head: Thread the spool head onto the shaft, turning clockwise until it is securely fastened.
- Кулпу төөнөгүчтү алып салыңыз.
4.4 Погонду тагуу
- Attach the shoulder strap to the designated hook or loop on the main shaft.
- Adjust the strap length so the cutting head is balanced and comfortable for your working posture, allowing for a slight bend in your arms.
4.5 Fueling the Brush Cutter
The HECHT 135 BTS uses a 2-stroke engine, requiring a specific petrol-oil mixture. Refer to the engine manufacturer's recommendations for the correct mixing ratio (typically 25:1 or 50:1, depending on the oil type).
- Use fresh, unleaded petrol and high-quality 2-stroke engine oil.
- Mix the fuel in a separate, approved fuel container.
- Май куюудан мурун кыймылдаткычтын өчүрүлгөнүн жана муздаганын текшериңиз.
- Carefully pour the mixed fuel into the fuel tank (capacity 0.7 L), avoiding spills.
- Күйүүчү майдын капкагын бекем жабыңыз.
5. Иштөө нускамалары
5.1 Моторду ишке киргизүү
- Щетка кескичти тегиз, туруктуу бетке коюңуз.
- Set the ON/OFF switch to the 'ON' position.
- Engage the choke (if the engine is cold).
- Күйүүчү май көрүнгөнгө чейин праймер лампасын бир нече жолу басыңыз.
- Hold the brush cutter firmly with one hand on the handlebar and the other on the starter grip.
- Pull the starter cord slowly until resistance is felt, then pull sharply and quickly until the engine fires (usually 1-3 pulls).
- Once the engine fires, disengage the choke (if applicable).
- Толук газды колдонуудан мурун кыймылдаткычты бир нече мүнөткө жылытууга уруксат бериңиз.
5.2 Using the Brush Cutter
Hold the brush cutter firmly with both hands on the handlebar. Maintain a wide stance for balance. The shoulder strap should support the weight of the machine, allowing you to guide it with minimal effort.
- Кесүү техникасы: Use a sweeping motion from side to side. For dense growth, cut in smaller sections.
- Бычактын колдонулушу: Ideal for thick weeds, brush, and small saplings. Be aware of kickback when using the blade.
- Spool Head Use: Best for grass, light weeds, and trimming around obstacles. Advance the line as needed by tapping the head on the ground (tap-and-go system) or manually.
- Maintain RPM: Operate at a consistent, high RPM for efficient cutting and to prevent engine strain.
- Тоскоолдуктарды болтурбоо: Do not strike hard objects like rocks, fences, or concrete with the cutting head.
5.3 Моторду токтотуу
- Release the throttle to allow the engine to idle.
- Move the ON/OFF switch to the 'OFF' position.
- Wait for all moving parts to come to a complete stop before setting the machine down.
6. Техникалык тейлөө
Regular maintenance ensures the longevity and safe operation of your HECHT 135 BTS brush cutter.
6.1 Ар бир колдонуудан кийин
- Бирдигин тазалоо: Remove grass, dirt, and debris from the engine, cutting head, and guard. Use a brush or compressed air.
- Inspect Cutting Head: Check the blade for sharpness and damage, or the line spool for wear and proper function. Replace or sharpen as needed.
- бекиткичтерди текшерүү: Бардык гайкалар, болттор жана бурамалар бекем болушун текшериңиз.
6.2 Мезгилдүү тейлөө
- Аба чыпкасы: Clean the air filter regularly (every 5-10 hours of operation, more often in dusty conditions). Wash foam filters in warm, soapy water, rinse, dry, and lightly oil. Replace paper filters if heavily soiled.
- Свеча: Inspect the spark plug every 20-30 hours. Clean carbon deposits and adjust the gap if necessary. Replace if electrodes are worn or damaged.
- Күйүүчү май чыпкасы: Inspect and replace the fuel filter in the tank annually or if fuel flow issues occur.
- Редуктордун майлоосу: Check and replenish the grease in the gearbox (at the cutting head end) as per manufacturer recommendations, typically every 25-50 hours.
- Муздатуу канаттары: Ашыкча ысып кетпеши үчүн, кыймылдаткычтын муздатуу канаттарын таза кармаңыз.
6.3 Сактоо
- For long-term storage, drain the fuel tank and run the engine until it stops to clear the carburetor of fuel.
- Clean the entire unit thoroughly.
- Store in a dry, well-ventilated area, away from direct sunlight and heat sources.
7. Кыйынчылыктарды
Бул бөлүмдө сиз щетка кескичиңизде кездешүүсү мүмкүн болгон жалпы маселелер каралат.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мотор иштебейт | No fuel, incorrect choke, fouled spark plug, clogged fuel filter, old fuel. | Check fuel level and mixture. Adjust choke. Clean/replace spark plug. Clean/replace fuel filter. Use fresh fuel. |
| Иш учурунда электр кубатын жоготуу | Clogged air filter, incorrect fuel mixture, dull cutting head, engine overheating. | Clean air filter. Verify fuel mixture. Sharpen/replace cutting head. Clean cooling fins. |
| Ашыкча термелүү | Damaged or unbalanced cutting head, loose fasteners, bent shaft. | Inspect and replace damaged cutting head. Tighten all fasteners. If shaft is bent, seek professional service. |
| Кесүү сызыгы алдыга жылбайт | Line tangled, insufficient line, incorrect spool installation. | Turn off engine, clear tangles, reload line, ensure spool is correctly installed. |
8. Техникалык шарттар
Technical data for the HECHT 135 BTS Petrol Brush Cutter:
- Мотор түрү: 2 тактылуу, бир цилиндр
- Көчүрүү: 33 см³
- Номиналдуу кубаттуулугу: 0.9 кВт / 1.2 HP
- Max. Engine Power: 1.1 кВт / 1.5 HP
- Номиналдуу кыймылдаткыч ылдамдыгы: 6500 об/мин
- Макс. Мотор ылдамдыгы: 13000 об/мин
- Күйүүчү май багынын көлөмү: 0.7 Л
- Blade Cutting Width: 255 мм (25.5 см)
- Line Cutting Width: 430 мм (43 см)
- Max. Line Thickness: 2.5 мм
- Max. Spool Head Speed: 8500 об/мин
- Таза Салмагы: 6.1 кг
- Жалпы узундугу: 1880 мм
- Жалпы туурасы: 720 мм
- Жалпы бийиктиги: 400 мм
9. Продукциянын сүрөттөрү
Visual references for the HECHT 135 BTS Brush Cutter.
Сүрөттүн сүрөттөлүшү: This is a placeholder image indicating 'No image available'. A typical product image would show the HECHT 135 BTS 2-stroke petrol brush cutter fully assembled, highlighting its handlebar, engine unit, and interchangeable cutting heads (3-tooth blade and line spool).
10. Кепилдик жана колдоо
For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
Note: Information regarding the availability of spare parts for this product is currently unavailable.
