1. Киришүү
This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Einhell GE-LC 36/35 Li Solo Battery Chainsaw. Please read this manual thoroughly before using the chainsaw for the first time and keep it for future reference. This product is designed for cutting wood and similar materials.
Image 1.1: The Einhell GE-LC 36/35 Li Solo Battery Chainsaw, showing the main unit and an outline of where the batteries are inserted.
2. Коопсуздук нускамалары
Электр шаймандарын иштетүүдө ар дайым коопсуздукка артыкчылык бериңиз. Бул нускамаларды аткарбоо олуттуу жаракатка же мүлккө зыян келтириши мүмкүн.
2.1 Жалпы коопсуздук
- Жеке коргонуу шаймандарын (ЖКК) кийиңиз: Always wear safety glasses, hearing protection, gloves, sturdy footwear, and appropriate clothing. A safety helmet with a face shield is recommended.
- Иш чөйрөсү: Ensure the work area is clear of bystanders, children, and pets. Keep the area well-lit and free from obstacles.
- Аба ырайы шарттары: Do not use the chainsaw in rain or damp conditions. Avoid operating in strong winds.
- Батареянын коопсуздугу: Use only recommended Einhell Power X-Change batteries. Do not expose batteries to heat or fire.
2.2 Chainsaw Өзгөчө коопсуздук
- Артка соккунун алдын алуу: Be aware of the kickback danger zone. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
- чынжыр тормоз: Ensure the chain brake is functional before each use. It is designed to stop the chain quickly in case of kickback.
- Туура кармоо: Always hold the chainsaw firmly with both hands, with your thumbs and fingers encircling the handles.
- Cutting Position: Maintain a balanced stance. Do not overreach. Cut at waist height or below if possible.
Image 2.1: The chain brake lever, which activates the kickback protection system, shown in the engaged (stop) position.
3. Продукт бүтүп калдыview
The Einhell GE-LC 36/35 Li Solo is a powerful cordless chainsaw featuring a brushless motor for extended operation and efficiency. It is part of the Einhell Power X-Change family, requiring two 18V batteries for 36V power.
3.1 Негизги өзгөчөлүктөрү
- Brushless Motor: For enhanced power and longer run time.
- Kickback Protection System: Automatically shuts off the saw upon chain lock.
- Oregon Branded Quality Chain and Bar: 14-inch guide bar for reliable cutting performance.
- Tool-free Chain Tension Adjustment: For quick and easy adjustments.
- Automatic Chain Lubrication: Ensures consistent chain oiling during operation.
- Metal Grip Claws: For secure handling and stability during cuts.
- Soft Grip Handle: For comfortable operation.
Сүрөт 3.1: Жакын пландан view of the 14-inch Oregon branded chain and guide bar, indicating its quality and low kickback design.
Image 3.2: Detail of the metal grip claws, providing improved stability and control during cutting operations.
4. Орнотуу
Before operating your chainsaw, ensure it is properly assembled and prepared.
4.1 Пакеттен чыгаруу
Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts list in your product documentation for a complete inventory.
4.2 Батареяны орнотуу
The GE-LC 36/35 Li Solo requires two 18V Einhell Power X-Change batteries (not included). Ensure batteries are fully charged before use.
- Locate the battery compartments on the chainsaw.
- Slide each charged battery into its respective compartment until it clicks securely into place.
- To remove, press the release button on the battery and pull it out.
Image 4.1: Hands demonstrating the correct method for inserting a Power X-Change battery into the chainsaw's battery slot.
Image 4.2: A graphic clearly stating that the battery and charger are not included with the 'Solo' version of the product.
4.3 Chain and Bar Assembly & Tensioning
The chainsaw features tool-free chain tension adjustment.
- Чынжыр тормозунун ажыратылганын текшериңиз.
- Loosen the side cover knob by turning it counter-clockwise.
- Чынжырды тиштүү дөңгөлөктүн жана багыттоочу тилкенин айланасына жайгаштырыңыз, кесүүчү четтери туура багытты карап турганын текшериңиз.
- Fit the guide bar and chain onto the chainsaw body, aligning the bar studs.
- Tighten the side cover knob slightly.
- Adjust chain tension by turning the tensioning wheel (usually located near the side cover knob) until the chain is snug against the guide bar but can still be pulled freely by hand. There should be no more than 2-3mm of sag in the middle of the bar.
- Fully tighten the side cover knob.
Image 4.3: A visual representation of the tool-free chain tensioning mechanism, highlighting the ease of adjustment without additional tools.
4.4 Chain Oil Filling
The chainsaw has an automatic chain lubrication system, but the oil reservoir must be filled before use.
- чынжырчаны тегиз жерге кой.
- Unscrew the oil tank cap (refer to Image 4.4).
- Fill the reservoir with high-quality chain and bar oil. Do not use waste oil or motor oil.
- Капкакты коопсуз алмаштырыңыз.
Image 4.4: Close-up of the oil tank cap, indicating its location for refilling the automatic chain lubrication system.
5. Иштөө нускамалары
Follow these steps for safe and effective operation of your chainsaw.
5.1 Баштоо жана токтотуу
- Ensure batteries are installed and chain oil reservoir is full.
- Disengage the chain brake by pulling the lever back towards the front handle.
- Press the safety lock-off button (if present) and then squeeze the trigger switch to start the chainsaw.
- To stop, release the trigger switch. Engage the chain brake immediately after stopping the cut or when moving between cuts.
5.2 Кесүү техникасы
- Planning the Cut: Before cutting, assess the wood for stability, potential kickback, and pinch points.
- Кесүү: Allow the chain to reach full speed before contacting the wood. Apply light pressure and let the saw do the work.
- Чакан дарактарды кыюу: For felling, make a directional notch on the side of the desired fall, then make the felling cut from the opposite side, slightly above the notch.
- Аяктоо: Work from the bottom up, supporting the branch to prevent pinching.
Image 5.1: A user demonstrating safe operation of the chainsaw, wearing appropriate PPE and cutting a log on a sawhorse.
6. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө оптималдуу иштөөнү камсыз кылат жана чынжырлуу арааңыздын иштөө мөөнөтүн узартат.
6.1 Чынжырдын чыңалуусун жөндөө
Check chain tension frequently, especially during initial use. A loose chain can derail, and a tight chain can cause excessive wear. Adjust as described in Section 4.3.
Image 6.1: Close-up of the chain tension adjustment knob, illustrating the mechanism for tool-free chain tensioning.
6.2 Чынжырды майлоо
The chainsaw features automatic chain lubrication. Regularly check the oil level in the reservoir and refill as needed (refer to Section 4.4). Ensure the oil port is clear of debris.
Image 6.2: A visual representation of the automatic chain lubrication system, showing oil being dispensed onto the chain during operation.
6.3 Тазалоо жана сактоо
- After each use, remove batteries and clean the chainsaw thoroughly. Remove sawdust and debris from the guide bar, chain, and motor housing.
- Араны кургак, коопсуз жерде, балдар жетпеген жерде сактаңыз.
- Араны сактоодо же ташууда ар дайым багыттоочу тилкенин капкагын колдонуңуз.
7. Кыйынчылыктарды
Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Chainsaw башталбайт | Batteries not charged or improperly inserted; Chain brake engaged; Safety switch not pressed. | Charge and reinsert batteries; Disengage chain brake; Press safety lock-off button before trigger. |
| Чынжыр кыймылдабайт | Чынжыр тормозу иштеп калган; Чынжыр өтө бекем тартылган; Тоскоолдук бар. | чынжыр тормозун ажыратуу; чынжыр чыңалуусун тууралоо; Бардык тоскоолдуктарды тазалаңыз. |
| Начар кесүү көрсөткүчү | Чынжырдын өңү өчкөн; Чынжырдын туура эмес тартылышы; Чынжырдагы май жетишсиз. | Sharpen or replace chain; Adjust chain tension; Refill oil reservoir. |
| Ашыкча термелүү | Loose chain; Damaged chain or guide bar. | Adjust chain tension; Inspect chain and guide bar for damage and replace if necessary. |
If problems persist, contact Einhell customer support or a qualified service technician.
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | GE-LC 36/35 Li Solo (4501780) |
| Power Source | Battery Powered (2 x 18V Power X-Change batteries required for 36V operation) |
| Тtage | 36 вольт |
| Ат күчү | 5 HP |
| Chain Length | 14 дюйм |
| Chain Speed | Approximately 15 m/s |
| Элемент Салмагы | 3.94 килограмм (8.67 фунт) |
| Өндүрүүчү | EINHELL |
Image 8.1: A graphic illustrating the chain speed of 15 meters per second, indicating efficient cutting performance.
9. Кепилдик жана колдоо
Кепилдик жөнүндө маалымат алуу, продуктуну каттоо же техникалык колдоо алуу үчүн, расмий Einhell компаниясына кайрылыңыз. webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
Кошумча жардам алуу үчүн, баш багыңыз Einhell official webсайт.
