KeylessOption Keyless Entry Remote Starter Car Key Fob Alarm EZSDEI474V Instruction Manual

Introduction

This manual provides comprehensive instructions for the KeylessOption EZSDEI474V Keyless Entry Remote Starter Car Key Fob. This device is designed as a replacement remote for aftermarket alarm and remote start systems. Please read all instructions carefully before attempting to program or use the remote.

Маанилүү: Ensure the FCC ID on your original remote matches EZSDEI474V for compatibility. Programming procedures may vary slightly depending on the specific aftermarket system installed in your vehicle. Refer to your vehicle's owner's manual or the manufacturer's website for additional system-specific details.

Продукт бүттүview

The KeylessOption EZSDEI474V remote features a durable design with three primary function buttons and one auxiliary button. It is designed to provide reliable keyless entry and remote start functionality for compatible aftermarket systems.

1-сүрөт: Фронт view of the KeylessOption EZSDEI474V remote key fob, showing the Lock, Unlock, Auxiliary, and Panic buttons. The Panic button is yellow with an asterisk symbol.

Пакеттин мазмуну

Пакетиңизде төмөнкү заттар бар экенин текшериңиз:

• KeylessOption EZSDEI474V Remote Key Fob
• Ring Loop
• CR2032 Lithium Cell Battery (pre-installed)
• Program Guide (this manual)

2-сүрөт: Image showing the contents of the KeylessOption package: the remote key fob, a metal ring loop, and a CR2032 battery. The battery is typically pre-installed in the remote.

Орнотуу жана программалоо

The KeylessOption EZSDEI474V remote requires programming to your vehicle's aftermarket alarm/remote start system. This process typically involves accessing a Valet/Programming switch within your vehicle.

Программалоо нускамалары

1. Open a vehicle door and ensure the dome light is illuminated.
2. Унаанын күйгүзгүчүн күйгүзүңүз RUN position or start the engine.
3. Within 15 seconds, locate and press the Valet/Program push button:
   • Press and release 1 time for vehicles equipped with remote start.
   • Press and release 7 times for vehicles without remote start.
   After the initial presses, press the Valet/Program switch one more time and hold it down. You should receive a confirmation chirp from the vehicle (flashing parking lights, horn honk, or both).
4. While holding the Valet/Program switch, press the Кулпу button on the new transmitter. A chirp or horn-honk will confirm that the code has been successfully learned.
5. Once the code is learned, release the Valet/Program push button.
6. Turn the vehicle ignition off and test the remote's functionality.

3-сүрөт: Visual representation of the programming steps, emphasizing the Valet/Program switch interaction and the remote's Lock button press for code learning.

For additional programming resources, please visit the manufacturer's website or consult your aftermarket system's specific documentation.

4-сүрөт: This image highlights the DIY self-programming capability and lists compatible aftermarket alarm and remote start systems, including Viper, Python, Avital, Hornet, and Automate, along with various model numbers.

Пультту иштетүү

Once successfully programmed, your KeylessOption remote will control your vehicle's aftermarket alarm and remote start system. The buttons on the remote perform the following functions:

• Кулпу баскычы: Locks vehicle doors and arms the alarm system.
• Кулпуну ачуу баскычы: Unlocks vehicle doors and disarms the alarm system.
• AUX баскычы: Activates an auxiliary function, which may vary depending on your aftermarket system's configuration (e.g., trunk release, remote start activation).
• Panic Button (Yellow Asterisk): Activates the vehicle's panic alarm. Press and hold for a few seconds to activate, press again to deactivate.

Refer to your aftermarket system's manual for specific details on how each button interacts with your installed system.

Техникалык тейлөө

Батареяны алмаштыруу

The remote uses a CR2032 lithium coin cell battery. If the remote's range decreases significantly or it stops responding, the battery may need replacement.

1. Carefully separate the two halves of the remote casing using a small flat-head screwdriver or a coin in the designated notch.
2. Remove the old CR2032 battery, noting its orientation (+ side up).
3. Жаңы CR2032 батареясын оң (+) тарабын өйдө каратып салыңыз.
4. Snap the two halves of the remote casing кайра бекем бириктирилет.

Эски батареяларды жергиликтүү эрежелерге ылайык жок кылыңыз.

Проблемаларды чечүү

If you continue to experience issues after following these troubleshooting steps, please contact KeylessOption customer support or a qualified automotive technician.

Техникалык шарттар

• Модел: KPT6058
• FCC ID: EZSDEI474V
• Бири-бирине шайкеш системасы: Viper, DEI, Automate, Valet, Avital, Clifford, Python Aftermarket Alarm/Remote Start Systems (with matching FCC ID)
• Батарея түрү: CR2032 литий монета клеткасы
• Өлчөмдөрү: Болжол менен 2 x 0.75 x 4 дюйм
• Салмагы: Болжол менен 0.317 унция

Кепилдик жана колдоо

KeylessOption products are designed for reliability and performance. For specific warranty information, please refer to the product packaging or the official KeylessOption website. For technical support or further assistance, please visit the KeylessOption Store on Amazon же түздөн-түз кардарларды тейлөө менен байланышыңыз.

Эскертүү: This is a replacement part designed to match the original in form and function. Ensure compatibility before purchase.

Видео ресурстар

Төмөнкү видеодо толук маалымат берилетview of KeylessOption products and may offer additional context for your remote key fob.