BARSKA Large 1.94 Cubic Feet Steel Biometric Fingerprint Keypad Safe

1. Киришүү

This manual provides essential instructions for the proper setup, operation, and maintenance of your BARSKA Large 1.94 Cubic Feet Steel Biometric Fingerprint Keypad Safe. This safe is designed to secure and protect your valuables using advanced biometric fingerprint scanning technology and a numeric digital keypad. It offers storage for up to 30 unique fingerprints and 1 PIN code, along with a programmable sound option for discreet access. In the event of battery depletion, two back-up keys are provided for emergency access.

2. Коопсуздук маалыматы

• Always keep the backup keys in a secure location away from the safe. Do not store them inside the safe.
• Уруксатсыз алып кетүүнү алдын алуу үчүн сейфтин бекем орнотулганын текшериңиз.
• Сейфти өтө жогорку температурага же нымдуулукка дуушар кылбаңыз.
• Оптималдуу иштеши үчүн манжа изинин сенсорун таза жана кургак кармаңыз.
• Батареянын заряды аз калганын көрсөткөн индикатор пайда болгондо, кулпуланып калбашы үчүн, батареяларды тез арада алмаштырыңыз.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• BARSKA Biometric Fingerprint Keypad Safe
• 2 x Камдык ачкычтар
• Mounting Hardware (Bolts)
• Көрсөтмө (бул документ)

4. Продукт бүтүп калдыview

The BARSKA Biometric Fingerprint Keypad Safe features a robust steel construction and a dual-access locking system. Below are key visual components of the safe.

1-сүрөт: Фронт view of the BARSKA Large Biometric Fingerprint Keypad Safe, showcasing its black finish and integrated lock mechanism.

2-сүрөт: Деталдаштырылган view of the biometric fingerprint scanner and numeric keypad, with a backup key inserted into the manual override lock.

3-сүрөт: A finger being placed on the illuminated biometric scanner for access, demonstrating the active state of the fingerprint recognition system.

4-сүрөт: The safe with its external dimensions indicated: 16 inches width, 14.5 inches depth, and 17 inches height.

5. Орнотуу

5.1 Батареяны орнотуу

The safe requires 4 AA batteries (not included) to power the electronic lock. To install:

1. Open the safe door using one of the backup keys (refer to Section 6.1).
2. Батарея бөлүмүн сейфтин эшигинин ички бетинен табыңыз.
3. Туура полярдуулукту (+/-) камсыз кылып, 4 жаңы AA батарейкасын салыңыз.
4. Батарея уясынын капкагын жабыңыз.
5. Test the keypad or fingerprint scanner to ensure power is supplied.

5.2 Сейфти орнотуу

This safe is designed for freestanding or tabletop placement and can be secured using the included mounting hardware.

1. Сейф үчүн ылайыктуу жерди тандап, анын тегиз жана туруктуу экенине ынаныңыз.
2. If mounting to a wall or floor, mark the desired drilling points through the pre-drilled holes inside the safe.
3. Тиешелүү бургулоочу учту колдонуп, дубалга же полго тешиктерди бургулаңыз.
4. Align the safe with the drilled holes and secure it using the provided bolts. Tighten all bolts firmly.

6. Иштөө нускамалары

6.1 Initial Access (Using Backup Key)

To open the safe for the first time or in case of battery failure:

1. Locate the keyhole cover on the lock mechanism.
2. Remove the cover to expose the keyhole.
3. Insert one of the backup keys and turn it clockwise.
4. While holding the key turned, rotate the handle (if applicable) or pull the door open.

6.2 Programming Fingerprints

Сейфте 30га чейин уникалдуу манжа издери сакталат.

1. With the safe door open, press the internal programming button (usually red or green, located near the battery compartment).
2. The scanner will illuminate, indicating it is ready for programming.
3. Place your finger firmly on the scanner. Lift and repeat this action several times (typically 3-5 times) until a confirmation sound or light signal is received.
4. Repeat for additional fingers or users.

6.3 Programming Keypad PIN

The safe allows for one programmable PIN code.

1. Сейфтин эшиги ачык турганда, ички программалоо баскычын басыңыз.
2. Enter your desired PIN code (4-8 digits) on the keypad.
3. Press the '#' or 'ENTER' button to confirm.
4. Re-enter the PIN code and press '#' or 'ENTER' again for verification. A confirmation sound or light signal will indicate successful programming.

6.4 Сейфти ачуу

You can open the safe using a registered fingerprint, the programmed PIN, or a backup key.

• Манжа изин колдонуу: Place a registered finger firmly on the biometric scanner. If recognized, the safe will unlock.
• Клавиатураны колдонуу: Enter your programmed PIN code on the keypad, then press '#' or 'ENTER'. If correct, the safe will unlock.
• Using Backup Key: 6.1-бөлүмдү караңыз.

6.5 Programmable Sound Option

The safe offers a programmable sound option to eliminate default alerts when opening. Refer to your specific model's detailed instructions for enabling or disabling this feature, typically involving a combination of keypad presses or a dedicated button.

7. Техникалык тейлөө

7.1 Батареяны алмаштыруу

When the low battery indicator (usually a light or audible alert) appears, replace all 4 AA batteries promptly to ensure continuous operation and prevent lockout. Refer to Section 5.1 for battery installation steps.

7.2 Тазалоо

Use a soft, dry cloth to clean the exterior of the safe. For the fingerprint sensor and keypad, use a slightly damp cloth and wipe gently. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.

8. Кыйынчылыктарды

• Safe does not open with fingerprint or PIN:
  • Батареянын деңгээлин текшериңиз жана керек болсо алмаштырыңыз.
  • Ensure your finger is clean and dry when using the biometric scanner.
  • Try re-registering your fingerprint (Section 6.2) or re-programming your PIN (Section 6.3).
  • Ensure the correct PIN is entered.
• Safe door does not close or lock properly:
  • Ensure there are no obstructions preventing the door from closing fully.
  • Check that the locking bolts are not extended when attempting to close the door. If they are, try re-entering your code or fingerprint to retract them.
• Fingerprint scanner not activating:
  • Батареялардын туура орнотулганын жана жетиштүү заряддалганын текшериңиз.
  • Ensure the scanner surface is clean.
• Safe opens unexpectedly after pressing '0':
  • This indicates a potential issue with the locking mechanism or programming. Ensure the safe is properly locked after closing. If this persists, contact customer support.
• All electronic functions fail:
  • Батареяларды дароо алмаштырыңыз.
  • Use the backup key for access.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information or technical assistance, please contact Barska customer support. Details can typically be found on the manufacturer's official webсайт же сатуучу аркылуу.