Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your ALFA International 22BT 3/4 SS Sausage Stuffing Tube. Please read this manual thoroughly before using the product to ensure safe and efficient operation and to prolong the lifespan of your equipment. This stuffing tube is designed for use with compatible sausage stuffer machines featuring a #22 hub.
Image: The ALFA International 22BT 3/4 SS Sausage Stuffing Tube, a stainless steel tube with a flared base designed for attaching to a #22 hub sausage stuffer.
Жайгашуу
- Пакеттен чыгаруу: Carefully remove the stuffing tube from its packaging. Inspect for any signs of damage during transit. If damage is found, do not use the product and contact your supplier.
- Алгачкы тазалоо: Before first use, thoroughly wash the stuffing tube with warm, soapy water. Rinse completely and dry to prevent water spots or residue.
- Тиркеме:
- Ensure your sausage stuffer machine is turned off and unplugged.
- Identify the #22 hub on your sausage stuffer.
- Align the flared base of the ALFA 22BT 3/4 SS stuffing tube with the #22 hub.
- Securely attach the tube to the hub according to your stuffer machine's specific instructions. The fit should be snug to prevent leakage during operation.
Иштөө нускамалары
This stuffing tube is an accessory for a sausage stuffer. Refer to your sausage stuffer's primary instruction manual for detailed operating procedures. The following steps outline the general use of the stuffing tube:
- Даярдоо Casing: Табигый сууга сasings in warm water as directed by the casing supplier. Synthetic casings may not require soaking.
- Жүк Casing: Даярдалган с этияттык менен жылдырыңызasing onto the stuffing tube, gathering it towards the base. Leave a small amount of casing кийинчерээк байлоо үчүн учунан илип турат.
- Load Meat Mixture: Fill your sausage stuffer's hopper with the prepared meat mixture.
- Толтурууну баштоо: Operate your sausage stuffer according to its instructions, slowly extruding the meat mixture into the casing. Guide the casing off the tube as it fills, ensuring an even fill and avoiding air pockets.
- Форма колбаса: Бир жолу сasing is filled, tie off the ends and twist or link the sausage to your desired length.
Кеңеш: For best results, ensure the meat mixture is cold and properly mixed. Avoid overfilling the casings, which can lead to bursting.
Техникалык тейлөө
Proper maintenance ensures hygiene and extends the life of your stuffing tube.
- Ар бир колдонуудан кийин тазалоо:
- Immediately after use, remove the stuffing tube from the stuffer.
- Rinse off any large meat particles under running water.
- Wash thoroughly with warm water and a mild dish soap. Use a brush if necessary to remove any stubborn residue from inside the tube.
- Rinse completely with clean water to remove all soap residue.
- Dry the tube completely with a clean cloth or allow it to air dry to prevent water spots and maintain its stainless steel finish.
- Сактагыч: Store the clean, dry stuffing tube in a clean, dry place, away from other metal objects that could scratch its surface.
- Материалдык кам көрүү: The tube is made of stainless steel. Avoid using abrasive cleaners or scouring pads, which can scratch the surface.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Meat mixture not flowing smoothly. | Mixture too thick or cold; tube partially clogged. | Ensure meat mixture is at the correct consistency and temperature. Check the tube for blockages and clean if necessary. |
| Casing tearing or bursting. | Casing not properly prepared (e.g., not soaked); overfilling; sharp edges on tube. | c камсыз кылууasings are properly soaked. Reduce stuffing pressure. Inspect the tube for any burrs or sharp edges (unlikely with stainless steel, but check). |
| Tube not fitting securely to stuffer. | Incorrect hub size; improper attachment. | Verify your stuffer has a #22 hub. Ensure the tube is aligned and secured according to your stuffer's instructions. |
Техникалык шарттар
- Модел: ALFA 22BT 3/4 SS
- Материал: Дат баспаган болот
- Hub Size Compatibility: №22 Хаб
- Hole Size (Output Diameter): 3/4 дюйм
- Узундугу: Approximately 6.5 inches (6-1/2")
- Пакеттин өлчөмдөрү: 7 x 5 x 5 дюйм
- Элемент Салмагы: 3.2 унция
Кепилдик жана колдоо
ALFA International products are manufactured to high standards. For specific warranty information, please refer to the documentation provided with your original purchase or contact ALFA International directly. For technical support or inquiries, please visit the official ALFA International webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.
Note: This manual is for the stuffing tube accessory only. For operation and maintenance of the main sausage stuffer machine, consult its dedicated manual.
