Antminer S9i 14TH/s ASIC Bitcoin Miner колдонуучусунун колдонмосу

1. Продукт бүтүп калдыview

The Antminer S9i 14TH/s is a high-performance ASIC (Application-Specific Integrated Circuit) miner specifically designed for Bitcoin mining. This device offers a robust hash rate and efficient power consumption, making it suitable for cryptocurrency mining operations.

Сүрөт 1: Алдыңкы view of the Antminer S9i 14TH/s Bitcoin Miner, showcasing its compact design and cooling fan.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• High Hash Rate: Achieves a total hash rate of 14.00 TH/s, distributed across three hash boards, each containing 63 hash chips.
• Эффективдүү электр керектөө: Designed for optimal power efficiency with a rating of 94 J/TH + 10%.
• Мыкты муздатуу: Features an air cooling method to maintain optimal operating temperatures.

2. Орнотуу жана орнотуу

Follow these steps to properly set up your Antminer S9i:

1. Пакеттен чыгаруу: Carefully remove the Antminer from its packaging. Inspect for any visible damage.
2. Кубат туташуу: The device requires power to all three PCI-E ports on the hash boards. It is recommended to power the control board before connecting power to the hash boards. You can use one Power Supply Unit (PSU) to power several boards, but avoid powering a single board with two PSUs.
   

   2-сүрөт: Ички view of the Antminer S9i, showing the hash boards and PCI-E power connectors. Ensure all three PCI-E ports are connected to a power supply.
3. Тармак туташуусу: Connect an Ethernet cable from your network router or switch to the Ethernet port on the Antminer's control board.
   

   Figure 3: Close-up of the Antminer S9i control board, highlighting the Ethernet port for network connectivity and indicator lights (Reset, Fault, Normal).

4. Жайгашкан жери: Place the Antminer in a well-ventilated area to ensure proper airflow for cooling. The operating temperature range is 0 to 40°C.

3. Иштөө нускамалары

Once the Antminer S9i is powered on and connected to the network, it will begin its initialization process. You can typically access the miner's web interface via its IP address to configure mining pools and monitor performance.

• Хэш ылдамдыгы: The device is designed to achieve a hash rate of 14.00 TH/s.
• Power Specifications:
  • DC Voltage Input: 11.60 to 13.00V
  • DC Input Current (at 12V): 102.3 A +10%
  • DC Input Power (at 12V): 1228 W +10%
  • 220VAC Power @25°C, 93% conversion efficiency of APW3: 1320 W +10%
• Ызы-чуу деңгээли: The typical noise level during operation is 76 dB. Consider this when choosing a location for the miner.

Сүрөт 4: Алдыңкы view of the Antminer S9i's cooling fan, essential for maintaining operational temperature.

5-сүрөт: Арткы view of the Antminer S9i's cooling fan, showing the Nidec UltraFlo branding, indicating a high-performance fan.

4. Техникалык тейлөө

Regular maintenance helps ensure the longevity and optimal performance of your Antminer S9i:

• Экологиялык шарттар:
  • Сактоо температурасы: -40дан 85°Cге чейин
  • Operation Humidity: 5%RH-95%RH (non-condensing)
• Чаңды тазалоо: Periodically clean the fans and heatsinks to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for best results.
• Кабелдик башкаруу: Ensure all power and network cables are securely connected and not obstructing airflow.

5. Кыйынчылыктарды

If you encounter issues with your Antminer S9i, consider the following:

• Кубат жок:
  • Verify that all three PCI-E power connectors are securely plugged into the hash boards and the control board is powered.
  • Ensure the Power Supply Unit (PSU) is functioning correctly and providing adequate power.
• Тармак туташуусу жок:
  • Check the Ethernet cable connection to both the miner and your network device.
  • Confirm your network router/switch is operational.
  • Observe the network indicator lights on the control board (refer to Figure 3).
• Low Hash Rate:
  • Ensure the miner is operating within the recommended temperature range (0 to 40°C). Overheating can lead to performance degradation.
  • Check for dust buildup on fans and heatsinks.
  • Verify mining pool configuration and internet connectivity.
• Физикалык абалы: Minor scratches and rust on the surface do not typically affect the functionality of the device. All hash boards are tested to ensure they are in good working condition before shipment.

6. Техникалык шарттар

Detailed technical specifications for the Antminer S9i 14.0TH/s:

Figure 6: Detailed specifications table for the Antminer S9i 14.0TH/s.

7. Кепилдик жана колдоо

For specific warranty terms and conditions, please refer to the documentation provided by your seller or the official Antminer webсайт. Кепилдик, адатта, өндүрүштөгү кемчиликтерди оңдойт.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding repairs, please contact the manufacturer or your authorized reseller. Ensure you have your product model number (S9i 14.0TH/s) and serial number ready when seeking support.