Compustar 2WG15R-SS PRO 4B 2-Way, 2-Mile Remote Instruction Manual

1. Киришүү

1.1 Продукт бүттүview

The Compustar 2WG15R-SS PRO 4B is a 2-way, 2-mile remote control designed for vehicle remote start and security systems. This remote allows users to control their vehicle from a significant distance, providing convenience and enhanced security features. Key functionalities include remote start, lock, unlock, and trunk release.

• 2-Way Communication: Provides feedback to the remote, confirming commands have been executed.
• Кеңейтилген диапазон: Offers up to 2 miles of operating range.
• 4 баскычтуу дизайн: Жалпы функциялар үчүн атайын баскычтар.

1.2 Кутуда эмне бар

Your Compustar 2WG15R-SS PRO 4B package typically includes:

• Compustar 2WG15R-SS PRO 4B Remote
• Колдонуучунун Колдонмосу (бул документ)
• Ачкыч шакеги
• (Note: Additional components like control modules, wiring harnesses, and installation accessories are part of the complete remote start system and are typically installed by a certified technician.)

Figure 1: The Compustar 2WG15R-SS PRO 4B 2-Way Remote. This image displays the black remote with four silver buttons, each featuring an icon for lock, unlock, car start, and trunk release. A green LED indicator is visible on the top left.

2. Орнотуу

2.1 Орнотуу

Installation of the Compustar remote start system, including the control module and wiring, should be performed by a qualified and certified technician. Improper installation can lead to vehicle damage or system malfunction. This manual focuses on the operation and programming of the remote control unit.

2.2 Remote Programming (Blade & Controller)

The remote control and associated modules (like the Blade AL/TB) require programming to function with your vehicle. This process typically involves connecting the modules to a computer and using specialized software. The following video demonstrates the general steps for flashing and updating the Blade module and Compustar controller firmware.

General Programming Steps:

1. Каттоо эсебин түзүңүз compustar.idatalink.com.
2. Dock the Blade module into the Compustar controller.
3. Connect the ADS-USB cable from your computer to the controller's RS232 data port.
4. Launch Internet Explorer and navigate to compustar.idatalink.com.
5. Select "Flash Your Module" and follow the on-screen prompts to select your vehicle's year, make, and model.
6. Configure desired features or flash with default settings.
7. Update the remote starter firmware if available.

For detailed, vehicle-specific instructions, always refer to the installation guide provided by the idatalink website after flashing your module.

3. Иштөө нускамалары

The Compustar 2WG15R-SS PRO 4B remote features four primary buttons for controlling your vehicle's functions. The 2-way communication provides visual and audible feedback on the remote to confirm successful command execution.

3.1 Баскыч функциялары

• Кулпу баскычы (үстүнкү): Locks the vehicle doors and arms the security system.
• Unlock Button (Second from Top): Unlocks the vehicle doors and disarms the security system.
• Car Start Button (Third from Top): Initiates or stops the remote start sequence.
• Trunk Release Button (Bottom): Opens the vehicle's trunk or hatch.

3.2 Remote Start Operation

Унааны алыстан от алдыруу үчүн:

1. басып, кармап туруңуз Car Start button (third from top) for approximately 3 seconds.
2. The remote will flash an indicator and then chirp to confirm the command has been sent.
3. The vehicle will start, and the remote will provide feedback (e.g., a spinning icon or "START" message on an LCD remote, if applicable) to confirm successful engine start.
4. To turn off the vehicle remotely, repeat the same process: press and hold the Car Start баскычын 3 секунда басыңыз.

3.3 Кулпулоо жана ачуу

To lock your vehicle, press the Кулпу button once. The remote will provide confirmation. To unlock, press the Кулпуну ачуу button once. The remote will confirm the unlock command.

3.4 Trunk Release

To open the trunk or hatch, press and hold the Магистралдык релиз button (bottom button) for approximately 3 seconds. The remote will confirm the command, and the trunk will open.

4. Техникалык тейлөө

4.1 Батареяны алмаштыруу

If your remote's range decreases significantly or it stops responding, the battery may need replacement. Refer to your remote's specific battery type (often a coin cell battery) and follow these general steps:

1. Пультту этияттык менен ачыңыз casing, usually by prying it apart with a small flat-head screwdriver or a specialized tool.
2. Note the orientation of the old battery before removing it.
3. Жаңы батарейканы туура полярдуулук менен салыңыз.
4. Пультту c күйгүзүңүзasing кайра бекем бириктирилет.

Абайлаңыз: Ensure proper battery type and orientation to avoid damage to the remote. Dispose of old batteries responsibly.

5. Кыйынчылыктарды

This section addresses common issues you might encounter with your Compustar remote.

• Алыстан жооп бербейт:
  • Check the remote battery. Replace if necessary (see Section 4.1).
  • Ensure you are within the 2-mile operating range. Obstacles and interference can reduce range.
  • Verify the vehicle's main battery is not depleted.
• Vehicle Does Not Remote Start:
  • Confirm all doors, hood, and trunk are closed.
  • Ensure the vehicle is in park (for automatic transmissions) or in proper gear for manual transmission (if configured for manual transmission remote start).
  • Check if the remote start feature is enabled in the system's programming.
  • If the vehicle was previously remote started and then the brake pedal was pressed without the key in the ignition, the remote start sequence might be interrupted. Insert the key and start the vehicle normally.
• Remote Feedback Issues:
  • If the remote is not providing 2-way feedback, check its battery.
  • Ensure there are no major obstructions between the remote and the vehicle's antenna.

For persistent issues, it is recommended to contact a certified Compustar installer or technical support.

6. Техникалык шарттар

7. Кепилдик жана колдоо

7.1 Кепилдик маалыматы

For specific warranty details regarding your Compustar 2WG15R-SS PRO 4B remote and the associated remote start system, please refer to the warranty card included with your product or visit the official Compustar website. Warranty coverage typically applies to manufacturing defects and may require proof of purchase and professional installation.

7.2 Техникалык колдоо

If you require technical assistance, have questions about product functionality, or need help with troubleshooting beyond what is covered in this manual, please contact Compustar technical support or your authorized Compustar dealer.

• Официалдуу Webсайт: www.compustar.com
• iDataLink Support (for module flashing): compustar.idatalink.com